Infiniti Q50 Hybrid (2018 year). Manual — part 7

JVI1401X

Instruments and controls

2-19

2-20

Instruments and controls

INDICATORS FOR OPERATION

1. Hybrid system start operation
indicator

This indicator appears when the shift lever is
in the P (Park) position.

This indicator means that the INFINITI
Direct Response Hybrid

®

System will start

by pushing the ignition switch with the brake
pedal depressed. You can start the hybrid
system directly in any position of the ignition
switch.

2. NO KEY warning

The warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.

See “Intelligent Key system” (P.3-6) for more
details.

3. SHIFT “P” warning

This warning will appear in the following
conditions.
. When the shift lever is in any position

except P (Park) and the push button
ignition switch has been placed in the
OFF position from the ON position.

. When the shift lever is operated while the

READY to drive indicator light is flashing.

. The driver’s door is opened with the shift

lever in “N”, “D” or “R”.

. When the vehicle cannot be driven be-

cause the hybrid system temperature has
become too high.

. When the engine stops due to sudden

deceleration on a cold winter day.

. If a malfunction occurs in a situation

other than those described above and
the engine cannot start automatically.

When this warning appears, place the shift
lever in the P (Park) position.

When the SHIFT “P” warning appears, a
buzzer will sound.

This warning will turn off in the following
conditions.
. When the shift lever has been placed in

the P (Park) position.

. When the ignition switch has been

pushed to ON.

4. Shift to Park - Li-ion battery low
warning

This warning appears when the shift lever is
in the “N” position and level of remaining
charge in the Li-ion battery is low.

When this warning appears, place the shift
lever in the P (Park) position.

This will turn off in the following conditions.
. When the shift lever has been placed in

the P (Park) position.

5. Shift to Park - Press brake and
start warning

This warning appears after the hybrid sys-
tem was automatically turned off if the level
of remaining charge in the Li-ion battery is
low.

When this warning appears, place the shift
lever in the P (Park) position and restart the
hybrid system.

6. “PUSH” warning

This warning appears when the shift lever is
moved to the P (Park) position with the
ignition switch in the ACC position after the
SHIFT “P” warning appears.

To push the ignition switch to the OFF
position, perform the following procedure:
. SHIFT “P” warning ? (Move the shift

lever to “P”)

? PUSH warning ? (Push

the ignition switch

? ignition switch

position is turned to ON)

? PUSH

warning

? (Push the ignition switch ?

ignition switch position is turned to OFF)

7. Intelligent Key battery discharge
indicator

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the battery
with a new one. (See “Intelligent Key battery
replacement” (P.8-21).)

8. Hybrid system start operation for
Intelligent Key system indicator

This indicator appears when the Intelligent
Key battery is running out of power and
when the Intelligent Key System and vehicle
are not communicating normally.

If this indicator appears, touch the ignition
switch with the Intelligent Key while depres-
sing the brake pedal. (See “Intelligent Key
battery discharge” (P.5-13).)

9. Remote engine start indicator

This indicator appears when the engine has
been started using the remote start function.
To start the vehicle, depress the brake pedal
and place the ignition switch in the ON
position.

For more details, see “Remote engine start”
(P.3-19).

10. Key ID Incorrect warning

This warning appears when the ignition
switch is pushed from the LOCK position
and the Intelligent Key cannot be recognized
by the system. You cannot start the hybrid
system with an unregistered key. Use the
registered Intelligent Key.

See “Intelligent Key” (P.3-2).

11. Parking brake release warning

This warning appears when the vehicle
speed is above 4 MPH (7 km/h) and the
parking brake is applied.

12. Low fuel warning

This warning appears when the fuel level in
the tank is getting low. Refuel as soon as it is
convenient, preferably before the fuel gauge
reaches the empty (0) position.

There is a small reserve of fuel remaining in
the tank when the fuel gauge reaches the
empty (0) position.

13. Low washer fluid warning

This warning appears when the washer tank
fluid is at a low level. Add washer fluid as
necessary. (See “Window washer fluid” (P.8-
13).)

14. Door/trunk open warning

This warning appears if any of the doors
and/or the trunk lid are open or not closed
securely. The vehicle icon indicates which
door or the trunk lid is open on the display.

15. Intelligent Key system warning

This warning appears if there is a malfunc-
tion in the Intelligent Key system.

If this warning appears while the hybrid
system is stopped, the hybrid system cannot
be started. If this warning appears while the
hybrid system is running, the vehicle can be
driven. However, in these cases, have the
system checked as soon as possible. It is
recommended you visit an INFINITI retailer
for this service.

16. Loose Fuel Cap warning

This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. (See “Fuel-filler
cap” (P.3-25).)

17. Tire Pressure Low - Add Air
warning

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long

Instruments and controls

2-21

2-22

Instruments and controls

as the low tire pressure warning light
remains illuminated. If this warning appears,
stop the vehicle and adjust the pressure to
the recommended COLD tire pressure
shown on the Tire and Loading Information
label. (See “Low tire pressure warning light”
(P.2-12) and “Tire Pressure Monitoring
System (TPMS)” (P.5-5).)

18. Flat Tire - Visit dealer warning

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and one or more flat tires are detected
while driving. A chime also sounds for
approximately 10 seconds. (See “Low tire
pressure warning light” (P.2-12) and “Tire
Pressure Monitoring System (TPMS)” (P.5-
5).)

19. Low oil pressure warning

This warning appears if low engine oil
pressure is detected. If the warning appears
during normal driving, pull off the road in a
safe area, stop the engine immediately and
call an INFINITI retailer or other authorized
repair shop.

The low oil pressure warning is not designed
to indicate a low oil level. Use the dipstick to
check the oil level. (See “Engine oil” (P.8-9).)

20. High temperature warning

This warning appears when the engine
coolant temperature is extremely high.

CAUTION

If the high temperature warning appears
when the ignition switch is in the ON
position, stop the vehicle safely as soon
as possible.

If the vehicle is overheated, continuing
vehicle operation may seriously damage
the engine. (See “If your vehicle over-
heats” (P.6-8) for the immediate action
required.)

21. Hybrid system overheat warning

This warning appears when the temperature
of the hybrid system is extremely high. Stop
the vehicle in a safe location as soon as
possible. Avoid quick starting or abrupt
acceleration. When the warning turns off,
the vehicle can be driven.

If the warning appears again soon after it
turns off, it is recommended that you have
the vehicle checked by an INFINITI retailer.

WARNING

Do not hold the vehicle in a stopped
position on an uphill grade by depressing
the accelerator or by slowly creeping
forward. This may cause damage to the
transmission or the vehicle may enter
traffic causing serious injury or death.
Always use the brake pedal when stop-
ping on an uphill grade.

CAUTION

. If you continue to drive the vehicle

while the warning is displayed, the
vehicle may become undriveable. If
this occurs, place the shift lever in the
“P” position and wait for a short
period of time with the vehicle
stopped until the display goes out.
In this case, the warning will be
displayed alternately with the SHIFT
“P” warning. (See “3. SHIFT “P”
warning” (P.2-20).)

. Do not drive the vehicle with the

warning on. Doing so could cause a
hybrid system malfunction.

22. All-Wheel Drive (AWD) warning
(if so equipped)

This warning appears when the Intelligent
All-Wheel Drive (AWD) system is not func-
tioning properly while the hybrid system is
running. The displayed message will vary
depending on the condition of the AWD
system malfunction. (See “Intelligent All-
Wheel Drive (AWD)” (P.5-123).)

23. Extended storage fuse warning

This warning may appear if the extended
storage fuse switch is not pushed in
(switched on). When this warning appears,
push in (switch on) the extended storage
fuse switch to turn off the warning. For
more information, see “Extended storage
fuse switch” (P.8-21).

24. Headlight warning

This warning appears if the LED headlights
are malfunctioning. It is recommended you
have the system checked by an INFINITI
retailer.

25. Adaptive Front lighting System
(AFS) warning (if so equipped)

This warning appears when the Adaptive
Front lighting System (AFS) is not function-
ing properly. It is recommended you have the
system checked by an INFINITI retailer.

(See “Adaptive Front lighting System (AFS)”
(P.2-41).)

26. Power will turn off to save the
battery warning

This warning appears after a period of time
if the shift lever has not moved from the “P”
(Park) position with the ignition switch in the
ACC or ON position.

27. Power turned off to save the
battery warning

This warning appears after the ignition
switch is automatically turned OFF to save
the 12-volt battery.

28. Light reminder warning

This warning appears when the driver side
door is opened with the headlight switch left
ON and the ignition switch in the ACC, OFF
or LOCK position. Place the headlight switch
to “OFF” or “AUTO” position. For additional
information, see “Headlight and turn signal
switch” (P.2-36).

29. “TIMER” indicator

This indicator appears when the set “TIMER”
indicator activates. You can set the time for
up to 6 hours. (See the Infiniti InTouch
Owner’s Manual.)

30. Low outside temperature
warning

This warning appears if the outside tem-
perature is below 37°F (3°C). The warning
can be set not to be displayed. (See the
Infiniti InTouch Owner’s Manual.)

31. Chassis control warning

This warning appears if Active Lane Control
(if so equipped), the active trace control
system and/or chassis control are not
functioning properly. It is recommended
you have the system checked by an INFINITI
retailer. (See “Active Lane Control” (P.5-24),
“Active trace control” (P.5-132) and “Chassis
control” (P.5-134).)

32. Cruise indicator

Models without Intelligent Cruise Control
(ICC) system:
This indicator shows the cruise control
system status. The status is shown by the
color.

See “Cruise control” (P.5-70) for details.

Models with Intelligent Cruise Control (ICC)
system:
This indicator shows the conventional (fixed
speed) cruise control mode status. The
status is shown by the color.

Instruments and controls

2-23

2-24

Instruments and controls

See “Conventional (fixed speed) cruise con-
trol mode” (P.5-89) for details.

33. Intelligent Cruise Control (ICC)
system ON indicator (if so
equipped)

This indicator shows the Intelligent Cruise
Control (ICC) system status. The status is
shown by the color. (See “Intelligent Cruise
Control (ICC)” (P.5-72).)

34. Driver assist system indicator

This indicator shows the status of the
following systems.
. Lane Departure Warning (LDW) (if so

equipped)

. Lane Departure Prevention (LDP) (if so

equipped)

. Blind Spot Warning (BSW)

. Blind Spot Intervention

®

(BSI) (if so

equipped)

. Distance Control Assist (DCA) (if so

equipped)

. Forward Emergency Braking (FEB)

. Predictive Forward Collision Warning

(PFCW)

For more details, see “Lane Departure
Warning (LDW)/Lane Departure Prevention
(LDP)” (P.5-32), “Blind Spot Warning
(BSW)” (P.5-39), “Blind Spot Intervention

®

(BSI)” (P.5-47), “Distance Control Assist
(DCA)” (P.5-93), “Forward Emergency Brak-
ing (FEB)” (P.5-104) and “Predictive For-
ward Collision Warning (PFCW)” (P.5-112).

The figure and color of this indicator will
change depending on the conditions of the
above systems. (In each section, the name of
this indicator is referred to as, “driver assist
system lane indicator”, “driver assist system
blind spot indicator” or “driver assist system
forward indicator” depending on the sys-
tems.)

35. INFINITI Drive Mode Selector
indicator

When a driving mode is selected using the
INFINITI Drive Mode Selector, the selected
mode indicator is displayed.
. PERSONAL

. SPORT

. STANDARD

. ECO

. SNOW
(See “INFINITI Drive Mode Selector” (P.5-
21).)

36. Automatic Transmission (AT)
position indicator

This indicator shows the automatic shift
position.

In the manual shift mode, when the trans-
mission does not shift to the selected gear
due to a transmission protection mode, the
AT position indicator will blink and a chime
will sound.

See “Automatic transmission” (P.5-15) for
further details.

JVI0681M

INDICATORS FOR MAINTE-
NANCE

For setting the indicators for maintenance,
see the Infiniti InTouch Owner’s Manual.

1. Engine oil and filter replacement
indicator

This indicator appears when the customer
set time comes for changing the engine oil
and filter. You can set or reset the distance
for changing the engine oil and filter.

2. Tire replacement indicator

This indicator appears when the customer
set distance comes for replacing tires. You
can set or reset the distance for replacing
tires.

WARNING

The tire replacement indicator is not a
substitute for regular tire checks, includ-
ing tire pressure checks. See “Changing
wheels and tires” (P.8-36). Many factors
including tire inflation, alignment, driv-
ing habits and road conditions affect tire
wear and when tires should be replaced.
Setting the tire replacement indicator
for a certain driving distance does not
mean your tires will last that long. Use
the tire replacement indicator as a guide
only and always perform regular tire
checks. Failure to perform regular tire
checks, including tire pressure checks
could result in tire failure. Serious vehicle

damage could occur and may lead to a
collision, which could result in serious
personal injury or death.

3. Other indicator

This indicator appears when the customer
set time comes for replacing items other
than the engine oil, oil filter and tires. You
can set or reset the distance for replacing
the items.

Instruments and controls

2-25

2-26

Instruments and controls

JVI1706X

JVI1484X

TRIP COMPUTER

Switches for the trip computer are located
on the right side of the steering wheel. To
operate the trip computer, push the
switches.

Each time the

or

switch is pushed,

the display will change.

The display items for trip computer are
changed on the lower display. For details,
see the Infiniti InTouch Owner’s Manual.

JVO0108X

1. Energy monitor

The energy monitor related to the hybrid
system is shown by the graphic.

: Engine

: Li-ion battery

shows the charge level of the Li-ion

battery.

The charge level display will continuously
change as the Li-ion battery charge level
increase or decreases during normal vehicle
operation. Movement of the display from
the far right to the far left of the bar is
normal.

The energy flow is also displayed in the
lower display. (See “Energy Flow” (P.Hybrid

System-6).)

2. EV mode odometer and twin trip
odometer (mile or km)

EV mode odometer:
This indicates the total distance traveled
using the electric motor only.

EV mode twin trip odometer:
This indicates the distance traveled in an
individual trip using the electric motor only.

Two types of individual trip can be recorded,
TRIP A and TRIP B.

Pushing the TRIP RESET switch will toggle
between TRIP A and TRIP B.

To reset the display to 0, hold down the
TRIP RESET switch for more than approxi-
mately 1 second.

3. Acceleration guide

This display provides the driver a visual
display of how efficiently the vehicle is being
driven based on accelerator pedal position.
When the drive mode is set to ECO using the
lower display, the acceleration guide oper-
ates with the ECO drive indicator (see “ECO
drive indicator light” (P.2-15)) and ECO
pedal (if so equipped) to help you improve
fuel economy. (See “INFINITI Drive Mode
Selector” (P.5-21) and “ECO pedal system”
(P.5-22).)

Instruments and controls

2-27

2-28

Instruments and controls

JVI0711X

: Accelerator pedal position indicator

: Power range

: Economy range

JVI0712X

The above examples of the acceleration
guide indicate the following conditions.

1. The vehicle is being driven economically

when the vehicle is driven with the
accelerator pedal position in the econo-
my range.

2. The vehicle is being driven less econom-

ically when the vehicle is driven with the
accelerator pedal position in the power
range.

This will not be displayed when Intelligent
Cruise Control (ICC) system (if so equipped)
or cruse control system (if so equipped) is
operating.

4. Current fuel consumption and
average fuel consumption (MPG, l
(liter)/100 km or km/l)

Current fuel consumption:
The current fuel consumption mode shows
the current fuel consumption.

Average fuel consumption:
The average fuel consumption mode shows
the average fuel consumption since the last
reset. Resetting is done by pushing the
or

switch for longer than 1 second.

The average fuel consumption is also reset
on the lower display. See the Infiniti InTouch
Owner’s Manual.

The display is updated every 30 seconds. At
about the first 1/3 mile (500 m) after a
reset, the display shows “——”.

5. Vehicle speed (MPH or km/h)

The vehicle speed mode shows the current
vehicle speed and the average vehicle speed
since the last reset.

Average vehicle speed:
Resetting is done by pushing the

or

switch for longer than 1 second.

The average vehicle speed display is updated
every 30 seconds. The first 30 seconds after
a reset, the display shows “——”.

6. Elapsed time and trip odometer
(mile or km)

Elapsed time:
The elapsed time mode shows the time since
the last reset. Resetting is done by pushing
the

or

switch for longer than 1

second. (The trip odometer is also reset at
the same time.)

Trip odometer:
The trip odometer mode shows the total
distance the vehicle has been driven since
the last reset. Resetting is done by pushing
the

or

switch for longer than 1

second. (The elapsed time is also reset at the
same time.)

7. Distance to empty (dte — mile or
km)

The distance to empty (dte) mode provides
you with an estimation of the distance that
can be driven before refueling. The dte is
constantly being calculated, based on the
amount of fuel in the fuel tank and the actual
fuel consumption.

The display is updated every 30 seconds.

The dte mode includes a low range warning
feature. If the fuel level is low, the warning is
displayed on the screen.

When the fuel level drops even lower, the
dte display will change to “——”.
. If the amount of fuel added is small, the

display just before the ignition switch is
pushed to the OFF position may con-
tinue to be displayed.

. When driving uphill or rounding curves,

the fuel in the tank shifts, which may
momentarily change the display.

8. Engine coolant temperature
gauge

This gauge indicates the temperature of the
engine coolant. If the engine is overheated,
the high temperature warning will appear.

The engine coolant temperature varies with
the outside air temperature and driving
conditions.

CAUTION

If the engine is overheated, continued
operation of the vehicle may seriously
damage the engine. See “If your vehicle
overheats” (P.6-8) for immediate action
required.

9. Navigation (if so equipped)

When the route guidance is set in the
navigation system, this item shows the
navigation route information.

For more details, see the Infiniti InTouch
Owner’s Manual.

10. Audio

The audio mode shows the status of audio
information.

For more details, see the Infiniti InTouch
Owner’s Manual.

11. Driving aids

The driving aids mode shows the operating
condition for the following systems.
. Lane Departure Warning (LDW)

. Lane Departure Prevention (LDP)

. Blind Spot Warning (BSW)

. Blind Spot Intervention

®

(BSI)

. Distance Control Assist (DCA)

. Forward Emergency Braking (FEB)

. Predictive Forward Collision Warning

(PFCW)

For more details, see “Lane Departure
Warning (LDW)/Lane Departure Prevention
(LDP)” (P.5-32), “Blind Spot Warning
(BSW)” (P.5-39), “Blind Spot Intervention

®

(BSI)” (P.5-47), “Distance Control Assist
(DCA)” (P.5-93), “Forward Emergency Brak-

Instruments and controls

2-29

2-30

Instruments and controls

ing (FEB)” (P.5-104) and “Predictive For-
ward Collision Warning (PFCW)” (P.5-112).

12. Tire pressure

The tire pressure mode shows the pressure
of all four tires while the vehicle is driven.

When the “Tire Pressure Low - Add Air” or
“Flat Tire - Visit dealer” warning appears,
the display can be switched to the tire
pressure mode by pushing the

or

switch.

The tire pressure unit can be changed in the
[TPMS setting] under the [Settings] menu
on the lower display. (See the Infiniti InTouch
Owner’s Manual.)

NOTE:

After the ignition switch is placed in the ON
position, it may take a period of time for the
tire pressure to be displayed while the
vehicle is driven. Depending on the radio
wave circumstance, tire pressure may not
correctly be displayed.

13. Chassis control

When Active Lane Control (if so equipped) or
the active trace control system is operated, it
shows the operating condition. See “Active
Lane Control” (P.5-24) and “Active trace
control” (P.5-132) for more details.

Warning check

The present warnings are displayed. If no
warning is present, “No Warning” is dis-
played.

JVI0679M

CLOCK AND OUTSIDE AIR TEM-
PERATURE

The clock

and outside air temperature

are displayed on the upper side of the vehicle
information display.

Clock

The clock can be adjusted on the lower
display. See the Infiniti InTouch Owner’s
Manual.

Outside air temperature (°F or °C)

The outside air temperature is displayed in °F
or °C in the range of −22 to 131°F (−30 to
55°C).

The outside temperature sensor is located in
front of the radiator. The sensor may be
affected by road or engine heat, wind
directions and other driving conditions. The
display may differ from the actual outside
temperature or the temperature displayed
on various signs or billboards.

SIC2132

Your vehicle has two types of security
systems, as follows:
. Vehicle security system

. INFINITI Vehicle Immobilizer System
The security condition will be shown by the
security indicator light.

VEHICLE SECURITY SYSTEM

The vehicle security system provides visual
and audio alarm signals if someone opens
the doors, hood, or trunk lid when the
system is armed. It is not, however, a motion
detection type system that activates when a
vehicle is moved or when a vibration occurs.

The system helps deter vehicle theft but
cannot prevent it, nor can it prevent the

theft of interior or exterior vehicle compo-
nents in all situations. Always secure your
vehicle even if parking for a brief period.
Never leave your Intelligent Key(s) in the
vehicle, and always lock it when unattended.
Be aware of your surroundings, and park in
secure, well-lit areas whenever possible.

Many devices offering additional protection,
such as component locks, identification
markers, and tracking systems, are available
at auto supply stores and specialty shops.
Your INFINITI retailer may also offer such
equipment. Check with your insurance com-
pany to see if you may be eligible for
discounts for various theft protection fea-
tures.

Instruments and controls

2-31

SECURITY SYSTEMS

2-32

Instruments and controls

SIC2045

How to arm the vehicle security
system

1. Close all windows.

The system can be armed even if the
windows are open.

2. Push the ignition switch to the OFF

position.

3. Remove the Intelligent Key from the

vehicle.

4. Close all doors, hood and trunk. Lock all

doors. The doors can be locked with the
Intelligent Key, door handle request
switch, power door lock switch or me-
chanical key.

5. Confirm that the security indicator light

comes on. The security indicator light
stays on for about 30 seconds. The
vehicle security system is now pre-
armed. After about 30 seconds the
vehicle security system automatically
shifts into the armed phase. The security
light begins to flash once every approxi-
mately 3 seconds. If, during this 30-
second pre-arm time period, the door is
unlocked, or the ignition switch is pushed
to ACC or ON, the system will not arm.

Even when the driver and/or passengers
are in the vehicle, the system will activate
with all doors, hood, and trunk lid locked
with the ignition switch in the LOCK
position. When pushing the ignition switch
to the ACC or ON position, the system will
be released.

Vehicle security system activation

The vehicle security system will give the
following alarm:
. The headlights blink and the horn sounds

intermittently.

. The alarm automatically turns off after

approximately 1 minute. However, the
alarm reactivates if the vehicle is tam-
pered with again.

The alarm is activated by:

. Unlocking the door or opening the trunk

lid without using the button on the
Intelligent Key, the door handle request
switch, one touch unlock sensor or the
mechanical key. (Even if the door is
opened by releasing the door inside lock
knob, the alarm will activate.)

. Opening the hood.

How to stop an activated alarm

The alarm will stop by unlocking a door by
pushing the UNLOCK button on the Intelli-
gent Key, pushing the door handle request
switch, touching the one touch unlock
sensor or using the mechanical key. The
alarm will not stop if the ignition switch is
placed in the ACC or ON position.

If the system does not operate as described
above, it is recommended you have it
checked by an INFINITI retailer.

INFINITI VEHICLE IMMOBILIZER
SYSTEM

The INFINITI Vehicle Immobilizer System
will not allow the INFINITI Direct Response
Hybrid

®

System to start without the use of

the registered Intelligent Key. Never leave
these keys in the vehicle.

FCC Notice:

For USA:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.

NOTE:

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.

For Canada:

This device complies with Industry Canada
licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
(1) this device may not cause interference,
and (2) this device must accept any inter-
ference, including interference that may
cause undesired operation of the device.

SIC2045

Security indicator light

The security indicator light is located on the
meter panel. It indicates the status of the
INFINITI Vehicle Immobilizer System.

The light blinks after the ignition switch was
in the LOCK, ACC or OFF position. This
function indicates the security systems
equipped on the vehicle are operational.

If the INFINITI Vehicle Immobilizer System is
malfunctioning, this light will remain on
while the ignition switch is in the ON
position.

If the light still remains on and/or the
hybrid system will not start, seek service
for the INFINITI Vehicle Immobilizer System
as soon as possible. Please bring all regis-
tered keys that you have. It is recommended
you visit an INFINITI retailer for this
service.

Instruments and controls

2-33

2-34

Instruments and controls

WARNING

In freezing temperatures the washer
solution may freeze on the windshield
and obscure your vision which may lead
to an accident. Warm windshield with
the defroster before you wash the wind-
shield.

CAUTION

. Do not operate the washer continu-

ously for more than 30 seconds.

. Do not operate the washer if the

reservoir tank is empty.

. Do not fill the window washer re-

servoir tank with washer fluid con-
centrates at full strength. Some
methyl alcohol based washer fluid
concentrates may permanently stain
the grille if spilled while filling the
window washer reservoir tank.

. Pre-mix washer fluid concentrates

with water to the manufacturer’s
recommended levels before pouring
the fluid into the window washer
reservoir tank. Do not use the win-
dow washer reservoir tank to mix the

washer fluid concentrate and water.

JVI0738X

The windshield wiper and washer operates
when the ignition switch is in the ON
position.

Push the lever down to operate the wiper at
the following speed:

AUTO — See “Rain-sensing auto wiper
system” (P.2-35).
LO — continuous low speed operation
HI — continuous high speed operation
MIST — one sweep operation of the
wiper

Pull the lever toward you

to operate the

washer. Then the wiper will also operate
several times.

WIPER AND WASHER SWITCH