Infiniti I35 (A33). Manual — part 520
SGI986
SGI987
Tow Truck Towing
NHGI0009S05
CAUTION:
I
All applicable state or Provincial (in Canada) laws and
local laws regarding the towing operation must be
obeyed.
I
It is necessary to use proper towing equipment to avoid
possible damage to the vehicle during towing operation.
Towing is in accordance with Towing Procedure Manual at
dealer.
I
Always attach safety chains before towing.
I
When towing, make sure that the transmission, steering
system and power train are in good order. If any unit is
damaged, dollies must be used.
INFINITI recommends that the vehicle be towed with the driving
(front) wheels off the ground as illustrated.
CAUTION:
I
Always release the parking brake when towing the vehicle
with the front wheels raised with the rear wheels on the
ground.
I
When towing manual transaxle models with the front
wheels on the ground (If a towing dollies does not be
used), turn the ignition key to the OFF position, and
secure the steering wheel in the straight-ahead position
with a rope or similar device. Never place the ignition key
in the LOCK position. This will result in damage to the
steering lock mechanism.
Move the shift lever to the N (Neutral) position.
I
Never tow an automatic transaxle model with the rear
wheels raised and the front wheels on the ground. This
may cause serious and expensive damage to the tran-
saxle. If it is necessary to tow the vehicle with the rear
wheels raised, always use towing dollies under the front
wheels.
I
Never tow an automatic transaxle model from the rear
(that is backward) with four wheels on the ground. This
may cause serious and expensive damage to the tran-
saxle.
VEHICLE RECOVERY (FREEING A STUCK VEHICLE)
NHGI0009S0501
I
Tow chains or cables must be attached only to the main
structural members of the vehicle.
I
Pulling devices should be routed so they do not touch any
part of the suspension, steering, brake or cooling sys-
tems.
I
Always pull the cable straight out from the front or rear of
the vehicle. Never pull on the vehicle at an angle.
I
Pulling devices such as ropes or canvas straps are not
recommended for use in vehicle towing or recovery.
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
LIFTING POINTS AND TOW TRUCK TOWING
Tow Truck Towing
GI-51
NHGI0010
Grade
Bolt size
Bolt diam-
eter *
mm
Pitch
mm
Tightening torque (Without lubricant)
Hexagon head bolt
Hexagon flange bolt
N·m
kg-m
ft-lb
in-lb
N·m
kg-m
ft-lb
in-lb
4T
M6
6.0
1.0
5.5
0.56
4
49
7
0.71
5
62
M8
8.0
1.25
13.5
1.4
10
—
17
1.7
13
—
1.0
13.5
1.4
10
—
17
1.7
13
—
M10
10.0
1.5
28
2.9
21
—
35
3.6
26
—
1.25
28
2.9
21
—
35
3.6
26
—
M12
12.0
1.75
45
4.6
33
—
55
5.6
41
—
1.25
45
4.6
33
—
65
6.6
48
—
M14
14.0
1.5
80
8.2
59
—
100
10
74
—
7T
M6
6.0
1.0
9
0.92
7
80
11
1.1
8
97
M8
8.0
1.25
22
2.2
16
—
28
2.9
21
—
1.0
22
2.2
16
—
28
2.9
21
—
M10
10.0
1.5
45
4.6
33
—
55
5.6
41
—
1.25
45
4.6
33
—
55
5.6
41
—
M12
12.0
1.75
80
8.2
59
—
100
10
74
—
1.25
80
8.2
59
—
100
10
74
—
M14
14.0
1.5
130
13
96
—
170
17
125
—
9T
M6
6.0
1.0
11
1.1
8
—
13.5
1.4
10
—
M8
8.0
1.25
28
2.9
21
—
35
3.6
26
—
1.0
28
2.9
21
—
35
3.6
26
—
M10
10.0
1.5
55
5.6
41
—
80
8.2
59
—
1.25
55
5.6
41
—
80
8.2
59
—
M12
12.0
1.75
100
10
74
—
130
13
96
—
1.25
100
10
74
—
130
13
96
—
M14
14.0
1.5
170
17
125
—
210
21
155
—
*: Nominal diameter
1)
Special parts are excluded.
2)
This standard is applicable to bolts having the following marks embossed on the bolt head.
MGI044A
TIGHTENING TORQUE OF STANDARD BOLTS
GI-52
NHGI0012
Refer to the following chart for help in selecting the appropriate chemical product or sealant.
Recommended Chemical Products and Sealants
Product Description
Purpose
Nissan North America
Part No. (USA)
Nissan Canada Part
No. (Canada)
Aftermarket Cross Ref-
erence Part Nos.
1
Rear View Mirror
Adhesive
Used to permanently
remount rear view mir-
rors to windows.
999MP-AM000P
99998-50505
Permatex 81844
2
Anaerobic Liquid Gas-
ket
For metal-to-metal
flange sealing.
Can fill a 0.38 mm
(0.015 inch) gap and
provide instant sealing
for most powertrain
applications.
999MP-AM001P
99998-50503
Permatex 51813 and
51817
3
High Performance
Thread Sealant
Provides instant seal-
ing on any threaded
straight or parallel
threaded fitting.
(Thread sealant only,
no locking ability.)
I
Do not use on plas-
tic.
999MP-AM002P
999MP-AM002P
Permatex 56521
4
Silicone RTV
Gasket Maker
999MP-AM003P
(Ultra Grey)
99998-50506
(Ultra Grey)
Permatex Ultra Grey
82194;
Three Bond 1207,
1215, 1216, 1217F and
1217G;
Nissan RTV Part No.
999MP-A7007
Gasket Maker for
Maxima/Quest 5-speed
automatic transmission
(RE5F22A)
—
—
Three Bond 1281B or
exact equivalent in its
quality
5
High Temperature,
High Strength Thread
Locking Sealant (Red)
Threadlocker
999MP-AM004P
999MP-AM004P
Permatex 27200;
Three Bond 1360,
1360N, 1305 N&P,
1307N, 1335, 1335B,
1363B, 1377C, 1386B,
D&E and 1388
6
Medium Strength
Thread Locking Seal-
ant (Blue)
Threadlocker (service
tool removable)
999MP-AM005P
999MP-AM005P
Permatex 24200,
24206, 24240, 24283
and 09178;
Three Bond 1322,
1322N, 1324 D&N,
1333D, 1361C, 1364D,
1370C and 1374
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS
GI-53
NHGI0011
SAE J1930 Terminology List
NHGI0011S01
All emission related terms used in this publication in accordance with SAE J1930 are listed. Accordingly, new
terms, new acronyms/abbreviations and old terms are listed in the following chart.
***: Not applicable
NEW TERM
NEW ACRONYM /
ABBREVIATION
OLD TERM
Air cleaner
ACL
Air cleaner
Barometric pressure sensor
BARO sensor
***
Barometric pressure sensor-BCDD
BAROS-BCDD
BCDD
Camshaft position
CMP
***
Camshaft position sensor
CMPS
Crank angle sensor
Canister
***
Canister
Carburetor
CARB
Carburetor
Charge air cooler
CAC
Intercooler
Closed loop
CL
Closed loop
Closed throttle position switch
CTP switch
Idle switch
Clutch pedal position switch
CPP switch
Clutch switch
Continuous fuel injection system
CFI system
***
Continuous trap oxidizer system
CTOX system
***
Crankshaft position
CKP
***
Crankshaft position sensor
CKPS
***
Data link connector
DLC
***
Diagnostic test mode
DTM
Diagnostic mode
Diagnostic test mode selector
DTM selector
Diagnostic mode selector
Diagnostic test mode I
DTM I
Mode I
Diagnostic test mode II
DTM II
Mode II
Diagnostic trouble code
DTC
Malfunction code
Direct fuel injection system
DFI system
***
Distributor ignition system
DI system
Ignition timing control
Early fuel evaporation-mixture heater
EFE-mixture heater
Mixture heater
Early fuel evaporation system
EFE system
Mixture heater control
Electrically erasable programmable read
only memory
EEPROM
***
Electronic ignition system
EI system
Ignition timing control
Engine control
EC
***
Engine control module
ECM
ECCS control unit
Engine coolant temperature
ECT
Engine temperature
Engine coolant temperature sensor
ECTS
Engine temperature sensor
Engine modification
EM
***
Engine speed
RPM
Engine speed
SAE J1930 TERMINOLOGY LIST
SAE J1930 Terminology List
GI-54
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст