Infiniti I35 (A33). Manual — part 157
SBT050A
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
DOOR TRIM
Removal and Installation (Cont’d)
BT-39
INSTALLATION
NHBT0014S02
I
Install in the reverse order of removal.
DOOR TRIM
Removal and Installation (Cont’d)
BT-40
Removal and Installation
NHBT0015
SBT248AB
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
ROOF TRIM
Removal and Installation
BT-41
REMOVAL
NHBT0015S01
CAUTION:
When removing or installing body side welts, do not allow butyl seal to come in contact with pillar
garnish and headlining.
1. Remove rear seats. Refer to “REAR SEAT” for details, BT-53.
2. Remove shoulder anchor bolts. Refer to RS-4, “Front Seat Belt” for details.
3. Remove front pillar garnishes, center pillar upper garnishes and rear pillar garnishes. Refer to “SIDE AND
FLOOR TRIM” for details, BT-35.
4. Remove steering wheel. Refer to RS-20, “Driver Air Bag Module and Spiral Cable” for details.
5. Push back the front seatback.
6. Remove two screws from the roof console of map lamp and sunroof finisher, and insert a removal tool
wrapped in a clean cloth between the right-hand side of the map light and the sunroof finisher, then dis-
connect connectors.
7. Remove sun visors.
8. Remove assist grips.
9. Remove interior lamp assembly, then disconnect connectors.
10. Remove metal clip securing headlining, then remove headlining from vehicle through front passenger side.
SBT247A
INSTALLATION
NHBT0015S02
I
Install in the reverse order of removal.
ROOF TRIM
Removal and Installation (Cont’d)
BT-42
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст