Infiniti G Sedan (2013 year). Manual — part 13
Black plate (200,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-24
Monitor, climate, audio, phone and voice recognition systems
.
Do not put anything on the RearView
camera. The rearview camera is installed
above the license plate.
.
When washing the vehicle with high-
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing water
condensation on the lens, a malfunction,
fire or an electric shock.
.
Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunc-
tion or cause damage resulting in a fire
or an electric shock.
CAUTION
Do not scratch the camera lens when
cleaning dirt or snow from the cover.
SAA1896
HOW TO READ DISPLAYED LINES
Guiding lines which indicate the vehicle
width and distances to objects with re-
ference to the bumper line
*
A
are dis-
played on the monitor.
Distance guide lines:
Indicate distances from the bumper.
. Red line
*
1
: approx. 1.5 ft (0.5 m)
. Yellow line
*
2
: approx. 3 ft (1 m)
. Green line
*
3
: approx. 7 ft (2 m)
. Green line
*
4
: approx. 10 ft (3 m)
Vehicle width guide lines
*
5
:
Indicate the vehicle width when backing
up.
Predictive course lines
*
6
:
Indicate the predictive course when back-
ing up. The predictive course lines will be
displayed on the monitor when the selec-
tor/shift lever is in the “R” (Reverse)
position and the steering wheel is turned.
The predictive course lines will move
depending on how much the steering
wheel is turned and will not be displayed
while the steering wheel is in the neutral
position.
The vehicle width guide lines and the width
of the predictive course lines are wider
than the actual width and course.
WARNING
.
Always turn and check that it is safe to
park your car before backing up. Always
back up slowly.
.
If the tires are replaced with different
sized tires, the predictive course line
may not be displayed correctly.
.
On a snow-covered or slippery road,
there may be a difference between the
predictive course line and the actual
course line.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (201,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
.
The displayed lines will appear slightly
off to the right because the rearview
camera is not installed in the rear center
of the vehicle.
.
The distance guide line and the vehicle
width guide line should be used as a
reference only when the vehicle is on a
level paved surface. The distance viewed
on the monitor is for reference only and
may be different from the actual distance
between the vehicle and displayed ob-
jects.
.
When backing up the vehicle up a hill,
objects viewed in the monitor are further
than they appear. When backing up the
vehicle down a hill, objects viewed in the
monitor are closer than they appear. Use
the inside mirror or glance over your
shoulder to properly judge distances to
other objects.
SAA1897
HOW TO PARK WITH PREDICTIVE
COURSE LINES
1. Visually check that the parking space is
safe before parking your vehicle.
2. The rearview of the vehicle is displayed
on the screen
*
A
as illustrated when
the selector/shift lever is moved to the
“R” (Reverse) position.
Monitor, climate, audio, phone and voice recognition systems
4-25
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (202,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-26
Monitor, climate, audio, phone and voice recognition systems
SAA1898
3. Slowly back up the vehicle adjusting
the steering wheel so that the predic-
tive course lines
*
B
enter the parking
space
*
C
.
4. When the back of the vehicle enter the
parking space
*
C
, maneuver the steer-
ing wheel to make the vehicle width
guide lines
*
D
parallel to the parking
space
*
C
.
5. When the vehicle is parked in the space
completely, move the selector/shift
lever to the P (Park) position (Automatic
Transmission models) or in an appro-
priate gear (Manual Transmission mod-
els) and apply the parking brake.
SAA1899
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (203,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
DIFFERENCE BETWEEN PREDICTED
AND ACTUAL DISTANCES
Backing up on a steep uphill
When backing up the vehicle up a hill, the
distance guide lines and the vehicle width
guide lines are shown closer than the
actual distance. For example, the display
shows 3 ft (1 m) to the place
*
A
, but the
actual 3 ft (1 m) distance on the hill is the
place
*
B
. Note that any object on the hill is
further than it appears on the monitor.
SAA1900
Backing up on a steep downhill
When backing up the vehicle down a hill,
the distance guide lines and the vehicle
width guide lines are shown further than
the actual distance. For example, the
display shows 3 ft (1 m) to the place
*
A
,
but the actual 3 ft (1 m) distance on the hill
is the place
*
B
. Note that any object on
the hill is closer than it appears on the
monitor.
Monitor, climate, audio, phone and voice recognition systems
4-27
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (204,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-28
Monitor, climate, audio, phone and voice recognition systems
SAA1923
Backing up near a projecting object
The predictive course lines
*
A
do not
touch the object in the display. However,
the vehicle may hit the object if it projects
over the actual backing up course.
SAA1924
Backing up behind a projecting
object
The position
*
C
is shown further than the
position
*
B
in the display. However, the
position
*
C
is actually at the same
distance as the position
*
A
. The vehicle
may hit the object when backing up to the
position
*
A
if the object projects over the
actual backing up course.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (205,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
SAA2404
Models with navigation system
SAA2606
Models without navigation system
PREDICTIVE COURSE LINE SETTINGS
To turn ON or OFF the predictive course line
display, push the SETTING button, select
the “Camera” key and push the ENTER
button.
For models with the navigation system,
select the “Others” key to show the
“Camera” key.
. Predictive Course Lines
When this item is turned to ON, the
predictive course lines will be displayed
on the monitor when the selector/shift
lever is in the “R” (Reverse) position.
HOW TO ADJUST SCREEN
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
rearview monitor, push the SETTING button
with the rearview monitor on, select the
“Display” key on the screen and select the
item key and adjust the level using the
INFINITI controller.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the rearview
monitor while the vehicle is moving. Make
sure the parking brake is firmly applied.
OPERATING TIPS
. When the selector/shift lever is shifted
to the “R” (Reverse) position, the
monitor screen automatically changes
to the rearview monitor mode. How-
ever, the radio can be heard.
. When the temperature is extremely high
or low, the screen may not clearly
display objects. This is not a malfunc-
tion.
. When strong light is directly coming on
the camera, objects may not be dis-
played clearly. This is not a malfunc-
tion.
. Vertical lines may be seen in objects on
the screen. This is due to strong
reflected light from the bumper. This
is not a malfunction.
. The screen may flicker under fluores-
cent light. This is not a malfunction.
. The colors of objects on the RearView
monitor may differ somewhat from the
actual color of objects. This is not a
malfunction.
. Objects on the monitor may not be clear
in a dark environment. This is not a
malfunction.
Monitor, climate, audio, phone and voice recognition systems
4-29
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (206,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-30
Monitor, climate, audio, phone and voice recognition systems
. If dirt, rain or snow accumulates on the
camera, the RearView monitor may not
display object clearly. Clean the cam-
era.
. Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with
diluted mild cleaning agent and then
wipe with a dry cloth.
. Do not damage the camera as the
monitor screen may be adversely af-
fected.
. Do not use wax on the camera window.
Wipe off any wax with a clean cloth
dampened with mild detergent diluted
with water.
SAA1499
Center ventilators
SAA1500
Side ventilators
SAA0564B
Rear (if so equipped)
Open or close, and adjust the air flow
direction of ventilators.
: This symbol indicates that the vents are
closed.
: This symbol indicates that the vents are open.
VENTILATORS
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (207,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
WARNING
.
The air conditioner cooling function
operates only when the engine is run-
ning.
.
Do not leave children or adults who
would normally require the support of
others alone in your vehicle. Pets should
not be left alone either. On hot, sunny
days, temperatures in a closed vehicle
could quickly become high enough to
cause severe or possibly fatal injuries to
people or animals.
.
Do not use the recirculation mode for
long periods as it may cause the interior
air to become stale and the windows to
fog up.
Start the engine and operate the automatic
climate control system.
When the “STATUS” button is pushed, the
automatic climate control status screen
will appear. (See “How to use STATUS
button” (P.4-9).)
SAA2723
Models with navigation system
SAA1520
Models without navigation system
You can individually set the driver and front
passenger side temperature using each
temperature control button (if so
equipped).
Monitor, climate, audio, phone and voice recognition systems
4-31
AUTOMATIC CLIMATE CONTROL
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (208,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-32
Monitor, climate, audio, phone and voice recognition systems
SAA1527
Type A
1.
“AUTO” automatic climate control ON
button/Temperature control dial (dri-
ver side)
2.
“A/C” air conditioner ON/OFF button
3.
“
” fan speed increase button
4.
“
” front defroster button
5.
“MODE” manual air flow control but-
ton
6.
“DUAL” zone control ON/OFF button/
Temperature control dial (passenger
side)
7.
“OFF” button for climate control sys-
tem
8.
“
” fan speed decrease button
9.
“
” rear window defroster button
(See “Rear window and outside mirror
defroster switch” (P.2-34).)
10. “
” intake air control button
AUTOMATIC CLIMATE CONTROL
(Type A)
Automatic operation
Cooling and/or dehumidified heating
(AUTO):
This mode may be used all year round. The
system works automatically to control the
inside temperature, air flow distribution
and fan speed after the preferred tempera-
ture is set manually.
1. Push the “AUTO” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)
2. Turn the temperature control dial (dri-
ver side) to set the desired tempera-
ture.
.
The temperature can be set within
the following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to
328C)
.
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control button. When the
“DUAL” button is pushed or the pas-
senger side temperature control button
is turned, the DUAL indicator will come
on. To turn off the passenger side
temperature control, push the “DUAL”
button.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (209,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4. To turn off the climate control system,
push the “OFF” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF):
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “AUTO” button on.
2. Push the “A/C” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
. The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging:
1. Push the “
” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, push the fan speed
increase button “
” and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “AUTO” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 238F (−58C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation
Fan speed control:
Push the fan speed increase “
” or
decrease “
” buttons to manually con-
trol the fan speed.
Push the “AUTO” button to return to
automatic control of the fan speed.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
. The temperature can be set within the
following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to 328C)
Air recirculation:
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “
”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
”.
Outside air circulation:
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control:
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air
control button “
”. To return to the
automatic control mode, push the intake
air control button “
” for about 2
Monitor, climate, audio, phone and voice recognition systems
4-33
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (210,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-34
Monitor, climate, audio, phone and voice recognition systems
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Air flow control:
Pushing the “MODE” manual air flow
control button selects the air outlet to:
: Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
To turn the system off
Push the OFF button.
SAA1526
Type B
1.
“AUTO” automatic climate control ON
button/Temperature control dial
2.
Air flow control button
3.
“
” Fan speed control dial
4.
“OFF” button
5.
“
” front defroster button
6.
“
” rear window defroster button
(See “Rear window and outside mirror
defroster switch” (P.2-34).)
7.
“
” intake air control button
AUTOMATIC CLIMATE CONTROL
(Type B)
Automatic operation
Cooling and/or dehumidified heating
(AUTO):
This mode may be used all year round. The
system works automatically to control the
inside temperature, air flow distribution
and fan speed after the preferred tempera-
ture is set manually.
1. Push the “AUTO” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (211,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
2. Use the temperature control dial to set
the desired temperature.
.
The temperature can be set within
the following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to
328C)
.
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. To turn off the climate control system,
push the “OFF” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF):
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “AUTO” button on.
2. Push the “A/C” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
. The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging:
1. Push the “
” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, turn the “
” fan
speed control dial and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “AUTO” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 238F (−58C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation
Fan speed control:
Turn the “
” fan speed control dial to
manually control the fan speed.
Push the “AUTO” button to return to
automatic control of the fan speed.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
. The temperature can be set within the
following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to 328C)
Air recirculation:
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “
”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
”.
Monitor, climate, audio, phone and voice recognition systems
4-35
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (212,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-36
Monitor, climate, audio, phone and voice recognition systems
Outside air circulation:
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control:
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air
control button “
”. To return to the
automatic control mode, push the intake
air control button “
” for about 2
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Air flow control:
Pushing an air flow control button manu-
ally controls the air flow and selects the air
outlet to the following settings.
: Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
To turn the system off
Push the OFF button.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (213,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
SAA2972
Type C
1.
“AUTO” automatic operation button/
Temperature control dial (driver side)
2.
“A/C” air conditioner ON/OFF button
3.
“
” fan speed increase button
4.
“
” front defroster button
5.
“MODE” manual air flow control but-
ton
6.
“DUAL” zone control ON/OFF button/
Temperature control dial (passenger
side)
7.
“OFF” button for climate control sys-
tem
8.
“
” fan speed decrease button
9.
“
” rear window defroster button
(See “Rear window and outside mirror
defroster switch” (P.2-34).)
10. “
” auto-recirculation button/
intake air control button
AUTOMATIC CLIMATE CONTROL
(Type C)
Automatic operation (AUTO)
The AUTO mode may be used year-round
as the system automatically controls con-
stant temperature, air flow distribution and
fan speed after the desired temperature is
set manually.
To turn off the heater and air conditioner,
push the “OFF” button.
Cooling and dehumidified heating:
1. Push the “AUTO” button.
(The AUTO indicator light will illuminate
and “AUTO” will appear on the display.)
2. If the A/C indicator light does not
illuminate, push the “A/C” button.
(The A/C indicator light will illuminate.)
3. Turn the temperature control dial (dri-
ver’s side) to set the desired tempera-
ture.
.
The temperature can be set within
the following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to
328C)
.
When the DUAL indicator light is
turned off:
— Pushing the driver’s side “AUTO”
button changes both the driver’s
and front passenger’s side tem-
perature.
— Pushing the passenger’s side
“DUAL” button changes only the
front passenger’s side tempera-
ture. (The DUAL indicator light
Monitor, climate, audio, phone and voice recognition systems
4-37
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (214,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
4-38
Monitor, climate, audio, phone and voice recognition systems
will illuminate and “DUAL” will
appear on the display.)
.
To set separate desired tempera-
tures for the driver and front pas-
senger, push the “DUAL” button, the
indicator light illuminates, and then
turn the corresponding temperature
control dial.
.
To cancel the separate temperature
setting, push the “DUAL” button, the
indicator light turns off, and the
driver’s side temperature setting will
be applied to both the driver’s and
front passenger’s sides.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C off):
1. Push the “AUTO” button.
(The AUTO indicator light will illuminate
and “AUTO” will appear on the display.)
2. If the A/C indicator light illuminates,
push the “A/C” button.
(The A/C indicator light will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
.
When the DUAL indicator light is
turned off:
— Pushing the driver’s side “AUTO”
button changes both the driver’s
and front passenger’s side tem-
perature.
— Pushing the passenger’s side
“DUAL” button changes only the
front passenger’s side tempera-
ture. (The DUAL indicator light
will illuminate and “DUAL” will
appear on the display.)
.
To set separate desired tempera-
tures for the driver and front pas-
senger, push the “DUAL” button, the
indicator light illuminates, and then
turn the corresponding temperature
control dial.
.
To cancel the separate temperature
setting, push the “DUAL” button, the
indicator light turns off, and the
driver’s side temperature setting will
be applied to both the driver’s and
front passenger’s sides.
.
Do not set the temperature lower
than the outside air temperature.
Doing so may cause the temperature
not to be controlled properly.
.
If the windows fog up, use dehumi-
dified heating instead of the A/C off
heating.
Dehumidified defrosting/defogging:
1. Push the “
” button. (The indicator
light will illuminate.)
2. Turn the temperature control dial to set
the desired temperature.
.
To remove frost from the outside
surface of the windshield quickly,
set the temperature control and fan
speed control to their maximum
position.
.
After the windshield is cleared, push
the “AUTO” button to set to the
automatic mode.
.
When the “
” button is pushed,
the air conditioner will automatically
turn on when the outside air tem-
perature is above 238F (−58C) to
defog the windshield. The air recir-
culation mode will automatically
turn off. The outside air circulation
mode will be selected to improve the
defogging performance.
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Black plate (215,1)
[ Edit: 2012/ 7/ 6 Model: V36-D ]
Manual operation
The manual mode can be used to control
the heater and air conditioner to your
desired settings.
To turn off the heater and air conditioner,
push the “OFF” button.
Fan speed control:
Push the fan speed control button “
” to
increase the fan speed.
Push the fan speed control button “
” to
decrease the fan speed.
Push the “AUTO” button to change the fan
speed to the automatic mode.
Air flow control:
Push the “MODE” button to change the air
flow mode.
: Air flows from the center and side ventilators.
: Air flows from the center and side ventilators,
and foot outlets.
: Air flows mainly from the foot outlets.
: Air flows from the defroster and foot outlets.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
. The temperature can be set within the
following range.
— For U.S.: 60 to 908F (16 to 328C)
— For Canada: 64 to 908F (18 to 328C)
Air recirculation:
Push the intake air control button to
recirculate interior air inside the vehicle.
The indicator light on the “
” side will
illuminate.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
”.
Outside air circulation:
Push the intake air control button to draw
outside air into the passenger compart-
ment.
The indicator light on the “
” side and
“
” side will turn off.
Automatic intake air control:
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air
control button.
To return to the automatic control mode,
push the intake air control button until the
indicator light on the “
” side illumi-
nates. The advanced climate control sys-
tem turns on and the intake air will be
controlled automatically.
To turn system off
Push the OFF button.
Advanced climate control system
The advanced climate control system keeps
the air inside of the vehicle clean, using
the ion control and the automatic air intake
control with outside odor and exhaust gas
detecting sensor.
Monitor, climate, audio, phone and voice recognition systems
4-39
Condition:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст