Infiniti FX35, FX50 (S51). Manual — part 301

CCS-24

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

ICC (FULL SPEED RANGE)

SYSTEM DESCRIPTION

ICC (FULL SPEED RANGE)

System Diagram

INFOID:0000000005501559

System Description

INFOID:0000000005501560

DESCRIPTION

JSOIA0110GB

CCS

ICC (FULL SPEED RANGE)

CCS-25

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

The Intelligent Cruise Control (Full Speed Range) system maintains a selected distance from the vehicle in
front of own vehicle within the speed range of 0 to 144 km/h (0 to 90 MPH) up to the set speed. The set speed
can be selected by the driver between 32 to 144 km/h (20 to 90 MPH). The vehicle travels at a set speed when
the road ahead is clear.
The ICC system can be set to one of two cruise control modes:

CAUTION:

Never set the cruise speed exceeding the posted speed limit.

Vehicle-to-vehicle Distance Control Mode

For maintaining a selected distance between own vehicle and the vehicle in front of own vehicle up to the pre-
set speed. Refer to

CCS-29, "System Description"

.

Conventional (Fixed Speed) Cruise Control Mode

For cruising at a preset speed. Refer to

CCS-38, "System Description"

.

NOTE:
In the Conventional (Fixed Speed) Cruise Control Mode, a warning chime will not sound to warn driver if own
vehicle are too close to the vehicle ahead.

WARNING:

Always drive carefully and attentively when using either cruise control mode. To avoid serious injury
or death, do not rely on the system to prevent accidents or to control the vehicle's speed in emer-
gency situations. Do not use cruise control except in appropriate rode and traffic conditions.

Forward Collision Warning (FCW)

FCW share the systems and components with ICC system. Refer to

CCS-387, "System Description"

.

Brake Assist (With Preview Function)

Brake Assist (With Preview Function) share the systems and components with ICC system. Refer to

BRC-138,

"System Description"

.

Intelligent Brake Assist (IBA) System

IBA system share the systems and components with ICC system. Refer to

BRC-144, "System Description"

.

ICC SENSOR INTEGRATED UNIT INPUT/OUTPUT SIGNAL ITEM

Input Signal Item

Transmit unit

Signal name

Description

ECM

Accelerator pedal position signal

Receives the accelerator pedal position signal from ECM via CAN
communication.

ICC steering
switch signal

MAIN switch signal

Receives the ICC steering switch signal from ECM via CAN commu-
nication.

SET/COAST switch
signal

CANCEL switch signal

RESUME/ACCELER-
ATE switch signal

DISTANCE switch sig-
nal

ICC brake switch signal

Receives the ICC brake switch signal from ECM via CAN communi-
cation.

Stop lamp switch signal

Receives the stop lamp switch signal from ECM via CAN communi-
cation.

Closed throttle position signal

Receives the closed throttle position signal from ECM via CAN com-
munication.

Engine speed signal

Receives the engine speed signal from ECM via CAN communica-
tion.

CCS-26

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

ICC (FULL SPEED RANGE)

Output Signal Item

TCM

Shift position signal

Receives the shift position signal from TCM via CAN communication.

Output shaft revolution signal

Receives the output shaft revolution signal from TCM via CAN com-
munication.

Current gear position signal

Receives the current gear position signal from TCM via CAN com-
munication.

Input speed signal

Receives the input speed signal from TCM via CAN communication.

Brake booster
control unit

Brake fluid pressure control signal

Receives the brake fluid pressure control signal from the brake
booster control unit via ITS communication.

Release switch signal

Receives the release switch signal from the brake booster control
unit via ITS communication.

IBA OFF switch signal

Receives the IBA OFF switch signal from the brake booster control
unit via ITS communication.

ABS actuator
and electric unit
(control unit)

Vehicle speed signal

Receives the vehicle speed signal (wheel speed) from ABS actuator
and electric unit (control unit) via CAN communication.

BCM

Front wiper request signal

Receives the front wiper request signal from BCM via CAN commu-
nication.

Steering angle
sensor

Steering angle sensor signal

Receives the steering angle sensor signal from the steering angle
sensor via CAN communication.

Transmit unit

Signal name

Description

Reception unit

Signal name

Description

ECM

ICC operation signal

Transmits the ICC operation signal to ECM via CAN communication.

Combination
meter (through
unified meter
and A/C amp.)

Meter display
signal

Own vehicle indicator
signal

Transmits the meter display signal to the combination meter
(through unified meter and A/C amp.) via CAN communication.

Vehicle ahead detection
indicator signal

Set vehicle speed indi-
cator signal

Set distance indicator
signal

MAIN switch indicator
signal

SET switch indicator
signal

ICC warning lamp signal

Transmits the ICC warning lamp signal to the combination meter
(through unified meter and A/C amp.) via CAN communication.

IBA OFF indicator lamp signal

Transmits the IBA OFF indicator lamp signal to the combination
meter (through unified meter and A/C amp.) via CAN communica-
tion.

ICC warning
chime

Buzzer output signal

• Transmits the buzzer output signal to the brake booster control

unit via ITS communication.

• The brake booster control unit outputs the buzzer output signal

and operates the ICC warning chime.

ICC brake hold
relay

ICC brake hold relay drive signal

• Transmits the ICC brake hold relay drive signal to the brake boost-

er control unit via ITS communication.

• The brake booster control unit outputs the ICC brake hold relay

drive signal and operates the ICC brake hold relay.

Brake booster
control unit

Brake fluid pressure command signal

Transmits the brake fluid pressure command signal to the brake
booster control unit via ITS communication.

CCS

ICC (FULL SPEED RANGE)

CCS-27

< SYSTEM DESCRIPTION >

[ICC (FULL SPEED RANGE)]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

Component Parts Location

INFOID:0000000005501561

1.

ICC steering switch

2.

Information display, ICC system
warning lamp

3.

ECM

4.

ICC sensor integrated unit

5.

ICC brake hold relay

6.

Booster solenoid/Release switch

7.

Brake pressure sensor

8.

Stop lamp switch

9.

ICC brake switch

10. IBA OFF switch

11.

ICC warning chime

12. Brake booster control unit

JPOIA0194ZZ