Infiniti FX35, FX50 (S51). Manual — part 1546
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERATING
WITH INTELLIGENT KEY
PWC-245
< SYMPTOM DIAGNOSIS >
[FRONT WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERAT-
ING WITH INTELLIGENT KEY
Description
INFOID:0000000005248335
NOTE:
Before performing the diagnosis in the following procedure, check “ Work Flow”. Refer to
Diagnosis Procedure
INFOID:0000000005248336
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
PWC-148, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure"
.
3.
CHECK “PW DOWN SET” SETTING IN “WORK SUPPORT”
Check “PW DOWN SET” setting in “WORK SUPPORT”.
Refer to
DLK-54, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “PW DOWN SET” setting in “WORK SUPPORT”.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-36, "Intermittent Incident"
.
NO
>> GO TO 1.
PWC-246
< SYMPTOM DIAGNOSIS >
[FRONT WINDOW ANTI-PINCH]
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000005248337
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to
PWC-249, "Removal and Installation"
>> INSPECTION END
POWER WINDOW SWITCH DOES NOT ILLUMINATE
PWC-247
< SYMPTOM DIAGNOSIS >
[FRONT WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW SWITCH DOES NOT ILLUMINATE
DRIVER SIDE
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000005248338
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch.
Refer to
PWC-249, "Removal and Installation"
>> INSPECTION END
PASSENGER SIDE
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000005248339
1.
REPLACE FRONT POWER WINDOW SWITCH (PASSENGER SIDE)
Replace front power window switch (passenger side).
Refer to
PWC-250, "Removal and Installation"
>> INSPECTION END
REAR LH
REAR LH : Diagnosis Procedure
INFOID:0000000005248340
1.
CHECK REAR POWER WINDOW SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch power supply and ground circuit.
Refer to
PWC-150, "REAR POWER WINDOW SWITCH : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
REPLACE REAR POWER WINDOW SWITCH LH
Replace rear power window switch LH.
Refer to
PWC-251, "Removal and Installation"
>> INSPECTION END
REAR RH
REAR RH : Diagnosis Procedure
INFOID:0000000005248341
1.
CHECK REAR POWER WINDOW SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch power supply and ground circuit.
Refer to
PWC-150, "REAR POWER WINDOW SWITCH : Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
REPLACE REAR POWER WINDOW SWITCH RH
Replace rear power window switch RH.
Refer to
PWC-251, "Removal and Installation"
>> INSPECTRION END
PWC-248
< PRECAUTION >
[FRONT WINDOW ANTI-PINCH]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000005248342
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст