Infiniti FX35, FX50 (S51). Manual — part 1039
EXL-152
< ECU DIAGNOSIS INFORMATION >
[XENON TYPE]
BCM (BODY CONTROL MODULE)
REQ SW -DR
Driver door request switch is not pressed
Off
Driver door request switch is pressed
On
REQ SW -AS
Passenger door request switch is not pressed
Off
Passenger door request switch is pressed
On
REQ SW -RR
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -RL
NOTE:
The item is indicated, but not monitored.
Off
REQ SW -BD/TR
Back door request switch is not pressed
Off
Back door request switch is pressed
On
PUSH SW
Push-button ignition switch (push switch) is not pressed
Off
Push-button ignition switch (push switch) is pressed
On
IGN RLY2 -F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
CLUCH SW
NOTE:
The item is indicated, but not monitored.
Off
BRAKE SW 1
The brake pedal is depressed when No. 7 fuse is blown
Off
The brake pedal is not depressed when No. 7 fuse is blown, or No. 7 fuse is normal
On
BRAKE SW 2
The brake pedal is not depressed
Off
The brake pedal is depressed
On
DETE/CANCL SW
Selector lever in P position
Off
Selector lever in any position other than P
On
SFT PN/N SW
Selector lever in any position other than P and N
Off
Selector lever in P or N position
On
S/L -LOCK
Steering is unlocked
Off
Steering is locked
On
S/L -UNLOCK
Steering is locked
Off
Steering is unlocked
On
S/L RELAY-F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
UNLK SEN -DR
Driver door is unlocked
Off
Driver door is locked
On
PUSH SW -IPDM
Push-button ignition switch (push-switch) is not pressed
Off
Push-button ignition switch (push-switch) is pressed
On
IGN RLY1 -F/B
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
DETE SW -IPDM
Selector lever in any position other than P
Off
Selector lever in P position
On
SFT PN -IPDM
Selector lever in any position other than P and N
Off
Selector lever in P or N position
On
SFT P -MET
Selector lever in any position other than P
Off
Selector lever in P position
On
SFT N -MET
Selector lever in any position other than N
Off
Selector lever in N position
On
Monitor Item
Condition
Value/Status
BCM (BODY CONTROL MODULE)
EXL-153
< ECU DIAGNOSIS INFORMATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ENGINE STATE
Engine stopped
Stop
While the engine stalls
Stall
At engine cranking
Crank
Engine running
Run
S/L LOCK-IPDM
Steering is unlocked
Off
Steering is locked
On
S/L UNLK-IPDM
Steering is locked
Off
Steering is unlocked
On
S/L RELAY-REQ
Steering lock system is not the LOCK condition and the changing condition from
LOCK to UNLOCK
Off
Steering lock system is the LOCK condition or the changing condition from LOCK
to UNLOCK
On
VEH SPEED 1
While driving
Equivalent to speed-
ometer reading
VEH SPEED 2
While driving
Equivalent to speed-
ometer reading
DOOR STAT-DR
Driver door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Passenger door is unlocked
UNLOCK
ID OK FLAG
Steering is locked
Reset
Steering is unlocked
Set
PRMT ENG STRT
The engine start is prohibited
Reset
The engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
KEY SW -SLOT
The Intelligent Key is not inserted into key slot
Off
The Intelligent Key is inserted into key slot
On
RKE OPE COUN1
During the operation of the Intelligent Key
Operation frequency
of the Intelligent Key
RKE OPE COUN2
NOTE:
The item is indicated, but not monitored.
—
CONFRM ID ALL
The key ID that the key slot receives is not recognized by any key ID registered to
BCM.
Yet
The key ID that the key slot receives accords with any key ID registered to BCM.
Done
CONFIRM ID4
The key ID that the key slot receives is not recognized by the fourth key ID regis-
tered to BCM.
Yet
The key ID that the key slot receives is recognized by the fourth key ID registered
to BCM.
Done
CONFIRM ID3
The key ID that the key slot receives is not recognized by the third key ID registered
to BCM.
Yet
The key ID that the key slot receives is recognized by the third key ID registered to
BCM.
Done
CONFIRM ID2
The key ID that the key slot receives is not recognized by the second key ID regis-
tered to BCM.
Yet
The key ID that the key slot receives is recognized by the second key ID registered
to BCM.
Done
Monitor Item
Condition
Value/Status
EXL-154
< ECU DIAGNOSIS INFORMATION >
[XENON TYPE]
BCM (BODY CONTROL MODULE)
CONFIRM ID1
The key ID that the key slot receives is not recognized by the first key ID registered
to BCM.
Yet
The key ID that the key slot receives is recognized by the first key ID registered to
BCM.
Done
TP 4
The ID of fourth Intelligent Key is not registered to BCM
Yet
The ID of fourth Intelligent Key is registered to BCM
Done
TP 3
The ID of third Intelligent Key is not registered to BCM
Yet
The ID of third Intelligent Key is registered to BCM
Done
TP 2
The ID of second Intelligent Key is not registered to BCM
Yet
The ID of second Intelligent Key is registered to BCM
Done
TP 1
The ID of first Intelligent Key is not registered to BCM
Yet
The ID of first Intelligent Key is registered to BCM
Done
Monitor Item
Condition
Value/Status
BCM (BODY CONTROL MODULE)
EXL-155
< ECU DIAGNOSIS INFORMATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
TERMINAL LAYOUT
PHYSICAL VALUES
JPMIA0062ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст