Infiniti FX35, FX50 (S51). Manual — part 1481
PG
HARNESS LAYOUT
PG-149
< DTC/CIRCUIT DIAGNOSIS >
[POWER SUPPLY & GROUND CIRCUIT]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
Rear Door Harness (RH Side)
INFOID:0000000005550401
JCMIM0394GB
PG-150
< DTC/CIRCUIT DIAGNOSIS >
[POWER SUPPLY & GROUND CIRCUIT]
HARNESS LAYOUT
Back Door Harness
INFOID:0000000005550402
JCMIM0395GB
PG
HARNESS CONNECTOR
PG-151
< DTC/CIRCUIT DIAGNOSIS >
[POWER SUPPLY & GROUND CIRCUIT]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
HARNESS CONNECTOR
Description
INFOID:0000000005240769
HARNESS CONNECTOR (TAB-LOCKING TYPE)
• The tab-locking type connectors help prevent accidental looseness or disconnection.
• The tab-locking type connectors are disconnected by pushing or lifting the locking tab(s). Refer to the figure
below.
CAUTION:
Never pull the harness or wires when disconnecting the connector.
[Example]
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
• A new style slide-locking type connector is used on certain systems and components, especially those
related to OBD.
• The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnec-
tion.
• The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure
below.
SEL769DA
PG-152
< DTC/CIRCUIT DIAGNOSIS >
[POWER SUPPLY & GROUND CIRCUIT]
HARNESS CONNECTOR
CAUTION:
• Never pull the harness or wires when disconnecting the connector.
• Be careful not to damage the connector support bracket when disconnecting the connector.
[Example]
HARNESS CONNECTOR (LEVER LOCKING TYPE)
• Lever locking type harness connectors are used on certain control units and control modules such as ECM,
ABS actuator and electric unit (control unit), etc.
• Lever locking type harness connectors are also used on super multiple junction (SMJ) connectors.
• Always confirm the lever is fully locked in place by moving the lever as far as it will go to ensure full connec-
tion.
CAUTION:
SEL769V
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст