Infiniti FX35, FX50 (S51). Manual — part 5
ADP-12
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
2.
Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indi-
cator.
• Seat synchronization are ON: Memory switch indicator blink two times.
• Seat synchronization are OFF: Memory switch indicator blink once.
>> END
6.
WITH CONSULT-III - STEP 1
Select “Work support”.
>> GO TO 7.
7.
WITH CONSULT-III - STEP 2
1.
Select “EXIT SEAT SLIDE SETTING”, “EXIT TILT SETTING” or “SEAT SLIDE VOLUME SET” then touch
display to change between ON and OFF.
-
EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
-
EXIT TILT SETTING: Entry/exit assist (steering column)
2.
Then touch “OK”.
>> END
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SYSTEM DESCRIPTION
AUTOMATIC DRIVE POSITIONER SYSTEM
AUTOMATIC DRIVE POSITIONER SYSTEM
AUTOMATIC DRIVE POSITIONER SYSTEM : System Diagram
INFOID:0000000005249623
JMJIA3537GB
ADP-14
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
AUTOMATIC DRIVE POSITIONER SYSTEM : System Description
INFOID:0000000005249624
OUTLINE
The system automatically moves the driver seat, steering column and door mirror position by the driver seat
control unit and the automatic drive positioner control unit. The driver seat control unit corresponds with the
automatic drive positioner control unit by UART communication.
NOTE:
The lumbar support system and the side support system are controlled independently with no link to the auto-
matic drive positioner system.
Function Description
Manual function
The driving position (seat, steering column and door mirror position) can be adjusted
by using the power seat switch, tilt & telescopic switch or door mirror remote control
switch.
Seat synchronization function
The positions of the steering column and door mirror are adjusted to the proper posi-
tion automatically while linking with manual operation [seat sliding, seat lifting (rear)
or seat reclining].
Memory function
The seat, steering column and outside mirror move to the stored driving position by
pressing seat memory switch (1 or 2).
Entry/Exit assist function
Exit
On exit, the seat moves backward and the steering column moves upward and for-
ward.
Entry
On entry, the seat and steering column returns from exiting position to the previous
driving position.
Intelligent Key interlock function
Perform memory operation, exiting operation and entry operation by Intelligent Key
unlock operation or driver side door request switch unlock operation .
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
AUTOMATIC DRIVE POSITIONER SYSTEM : Component Parts Location
INFOID:0000000005249625
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M51, M52
3.
Tilt motor M49
4.
Telescopic motor M49
5.
Unified meter and A/C amp. M67
6.
AV control unit
With NAVI M87, M88
Without NAVI M83, M85
7.
AT assembly connector F51
8.
Tilt & telescopic switch M31
9.
Door mirror remote control switch
M26
10. Key slot M22
11.
Tilt sensor M48
12. Telescopic sensor M48
13. Seat memory switch D5
A.
Dash side lower (Passenger side)
B.
View with instrument driver lower
panel removed
C.
View with steering column cover low-
er and upper removed
D.
Behind cluster lid C
E.
A/T assembly
(TCM is built in A/T assembly)
F.
View with instrument driver lower
panel removed
G
View with steering column cover low-
er and upper removed
JMJIA1961ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст