Infiniti FX35, FX50 (S51). Manual — part 1248
INL-192
< REMOVAL AND INSTALLATION >
STEP LAMP
STEP LAMP
Exploded View
INFOID:0000000005245646
Removal and Installation
INFOID:0000000005245647
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Insert any appropriate tool into the gap between the step lamp and the door trim. Remove the step lamp.
2.
Disconnect the step lamp connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000005245648
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after it turns OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect
the performance of lamp. When replacing bulb, always replace it with new one.
STEP LAMP BULB
1.
Remove the step lamp. Refer to
.
2.
Remove the lens.
3.
Remove the bulb.
1.
Step lamp case
2.
Bulb
3.
Lens
A
Metal clip
JPLIA1216ZZ
PERSONAL LAMP
INL-193
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP
Exploded View
INFOID:0000000005245649
NOTE:
Replace the personal lamp case as a set (right and left). After removing the headlining assembly, remove the
personal lamp case. Refer to
Removal and Installation
INFOID:0000000005245650
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the headlining assembly. Refer to
2.
Insert any appropriate tool into the gap between the lens. Remove the lens.
3.
Press both side pawls (A) in the direction of the arrow (
).
Remove the personal lamp finisher.
4.
Remove the personal lamp case from the headlining assembly.
NOTE:
Replace the personal lamp case as a set (right and left).
INSTALLATION
Install in the reverse order of removal.
NOTE:
The following item is an easier way to install the personal lamp finisher.
1.
Personal lamp case
2.
Personal lamp finisher
3.
Lens
4.
Bulb
JPLIA1217ZZ
JPLIA0087ZZ
INL-194
< REMOVAL AND INSTALLATION >
PERSONAL LAMP
• Press the personal lamp finisher to the headlining. Pull the per-
sonal lamp case pawl in the direction of the arrow (
) with any
appropriate tool.
Replacement
INFOID:0000000005245651
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after it turns OFF.
• Never leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect
the performance of lamp. When replacing bulb, always replace it with new one.
PERSONAL LAMP BULB
1.
Insert any appropriate tool into the gap between the lens. Remove the lens.
2.
Remove the bulb.
JPLIA0937ZZ
PUDDLE LAMP
INL-195
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PUDDLE LAMP
Exploded View
INFOID:0000000005245652
Puddle lamp is integrated into the door mirror assembly.
• With ADP. Refer to
MIR-78, "DOOR MIRROR ASSEMBLY : Exploded View"
• Without ADP. Refer to
MIR-100, "DOOR MIRROR ASSEMBLY : Exploded View"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст