Infiniti FX35, FX50 (S51). Manual — part 1619
E-SUS CONTROL UNIT
SCS-61
< REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
SCS
N
O
P
REMOVAL AND INSTALLATION
E-SUS CONTROL UNIT
Exploded View
INFOID:0000000005236221
Removal and Installation
INFOID:0000000005236222
REMOVAL
1.
Turn the ignition switch OFF.
2.
Remove the luggage side finisher lower (LH). Refer to
.
3.
Disconnect the E-SUS control unit connector.
4.
Remove the E-SUS control unit mounting bolts.
5.
Remove the E-SUS control unit from vehicle.
INSTALLATION
Install in the reverse order of removal.
1.
E-SUS control unit
: Vehicle front
JSEIA0019ZZ
SCS-62
< REMOVAL AND INSTALLATION >
FRONT BODY VERTICAL G SENSOR
FRONT BODY VERTICAL G SENSOR
Exploded View
INFOID:0000000005236223
NOTE:
The above figure shows left side. Right side is the mirror image.
Removal and Installation
INFOID:0000000005236224
REMOVAL
1.
Turn the ignition switch OFF.
2.
Remove the engine room covers (LH/RH). Refer to
.
3.
Disconnect the front body vertical G sensor connector.
4.
Remove the front body vertical G sensor mounting bolts.
5.
Remove the front body vertical G sensor from vehicle.
INSTALLATION
Install in the reverse order of removal.
1.
Front body vertical G sensor
: Vehicle front
JSEIA0020ZZ
FRONT WHEEL VERTICAL G SENSOR
SCS-63
< REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
SCS
N
O
P
FRONT WHEEL VERTICAL G SENSOR
Exploded View
INFOID:0000000005236225
NOTE:
The above figure shows left side. Right side is the mirror image.
Removal and Installation
INFOID:0000000005236226
REMOVAL
1.
Turn the ignition switch OFF.
2.
Remove the air cleaner case. Refer to
.
3.
Disconnect the front wheel vertical G sensor connector.
4.
Remove the front tire.
5.
Remove the bracket mounting bolts.
6.
Remove the front wheel vertical G sensor mounting nut.
7.
Remove the front wheel vertical G sensor from front strut.
INSTALLATION
Install in the reverse order of removal.
1.
Front wheel vertical G sensor
2.
Bracket
3.
Front strut
JSEIA0021ZZ
SCS-64
< REMOVAL AND INSTALLATION >
REAR BODY VERTICAL G SENSOR
REAR BODY VERTICAL G SENSOR
Exploded View
INFOID:0000000005236227
Removal and Installation
INFOID:0000000005236228
REMOVAL
1.
Turn the ignition switch OFF.
2.
Remove the Luggage floor spacer. Refer to
3.
Disconnect the rear body vertical G sensor connector.
4.
Remove the rear body vertical G sensor mounting bolts.
5.
Remove the rear body vertical G sensor from vehicle.
INSTALLATION
Install in the reverse order of removal.
1.
Rear body vertical G sensor
JSEIA0022ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст