Infiniti FX35, FX50 (S51). Manual — part 117
AV
DIAGNOSIS AND REPAIR WORK FLOW
AV-241
< BASIC INSPECTION >
[NAVIGATION (SINGLE MONITOR)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Work Flow (Camera Assistance Sonar)
INFOID:0000000005475087
OVERALL SEQUENCE
• Reference 1··· Refer to
AV-192, "CONSULT-III Function (SONAR)"
• Reference 2··· Refer to
.
• Reference 3··· Refer to
DETAILED FLOW
1.
INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
Is the occurred symptom malfunction?
YES
>> GO TO 2.
NO
>> INSPECTION END
2.
DIAGNOSIS WITH CONSULT-III
1.
Connect CONSULT-III and perform a self-diagnosis for “SONAR”. Refer to
NOTE:
Skip to step 4 of the diagnosis procedure if “SONAR” is not displayed.
JSNIA0732GB
AV-242
< BASIC INSPECTION >
[NAVIGATION (SINGLE MONITOR)]
DIAGNOSIS AND REPAIR WORK FLOW
2.
Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
TROUBLE DIAGNOSIS FOR DTC
1.
Check the DTC indicated in the self-diagnosis results.
2.
Perform the relevant diagnosis referring to the DTC Index. Refer to
>> GO TO 5.
4.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
ERROR PART REPAIR
1.
Repair or replace the identified malfunctioning parts.
2.
Perform a self-diagnosis for “SONAR” with CONSULT-III.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3.
Check that the symptom does not occur.
Does the symptom occur?
YES
>> GO TO 1.
NO
>> INSPECTION END
AV
INSPECTION AND ADJUSTMENT
AV-243
< BASIC INSPECTION >
[NAVIGATION (SINGLE MONITOR)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT : Description
INFOID:0000000005475088
BEFORE REPLACEMENT
When replacing AV control unit, save or print current vehicle specification with CONSULT-III configuration
before replacement.
AFTER REPLACEMENT
CAUTION:
When replacing AV control unit, you must perform “WRITE CONFIGURATION” with CONSULT-III.
• Complete the procedure of “WRITE CONFIGURATION” in order.
• If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT : Work Procedure
INFOID:0000000005475089
1.
SAVING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform “READ CONFIGURATION” to save or print current vehicle specification. Refer to
URATION (AV CONTROL UNIT) : Description"
NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection”.
>> GO TO 2.
2.
REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to
>> GO TO 3.
3.
WRITING VEHICLE SPECIFICATION
-CONSULT-III Configuration
Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” to write
vehicle specification. Refer to
AV-244, "CONFIGURATION (AV CONTROL UNIT) : Work Procedure"
.
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description
INFOID:0000000005475090
• Since vehicle specifications are not included in the AV control unit after replacement, it is required to write
vehicle specifications with CONSULT-III.
• Configuration has three functions as follows.
AV-244
< BASIC INSPECTION >
[NAVIGATION (SINGLE MONITOR)]
INSPECTION AND ADJUSTMENT
CONFIGURATION (AV CONTROL UNIT) : Work Procedure
INFOID:0000000005475091
NOTE:
If “WRITE CONFIGURATION” is unsuccessful, perform “Accessory Number Initialization”. For details, refer to
AV-175, "On Board Diagnosis Function"
After performing “Accessory Number Initialization”, reboot the AV control unit to perform “WRITE CONFIGU-
RATION”.
1.
WRITING MODE SELECTION
CONSULT-III Configuration
Select “CONFIGURATION” of “MULTI AV”.
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
2.
PERFORM “WRITE CONFIGURATION-CONFIG FILE”
CONSULT-III Configuration
Perform “WRITE CONFIGURATION-Config file”.
>> WORK END
3.
PERFORM “WRITE CONFIGURATION-MANUAL SELECTION”
CONSULT-III Configuration
Select “WRITE CONFIGURATION-Manual selection” to write vehicle specifications into the AV control unit.
For data to write, refer to
AV-244, "CONFIGURATION (AV CONTROL UNIT) : Configuration List"
.
>> GO TO 4.
4.
OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course
lines) are normal.
>> WORK END
CONFIGURATION (AV CONTROL UNIT) : Configuration List
INFOID:0000000005475092
CAUTION:
Check vehicle specifications before servicing.
Function
Description
READ CONFIGURATION
• Reads the vehicle configuration of current AV control unit.
• Saves the read vehicle configuration.
WRITE CONFIGURATION-Manual selection
Writes the vehicle configuration with manual selection.
WRITE CONFIGURATION-Config file
Writes the vehicle configuration with saved data.
MANUAL SETTING ITEM
Items
Setting value
STEERING
LHD
RHD
CAMERA SYSTEM
NONE/AVM
REAR CAMERA
REAR+SIDE
SOUND SYSTEM
BASE
BOSE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст