Infiniti FX35, FX50 (S51). Manual — part 1362
MA-12
< PERIODIC MAINTENANCE >
RECOMMENDED FLUIDS AND LUBRICANTS
RECOMMENDED FLUIDS AND LUBRICANTS
Fluids and Lubricants
INFOID:0000000005248710
*1: For further details, see “Engine Oil Recommendation”.
*2: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and
automatic transmission durability, and may damage the automatic transmission, which is not covered by the INFINITI new
vehicle limited warranty.
*3: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 0
°
C (32
°
F).
*4: See an INFINITI dealer for service for synthetic oil.
*5: Using transfer fluid other than Genuine NISSAN Matic J ATF will cause deterioration in driveability and transfer durability,
and may damage the transfer, which is not covered by the INFINITI new vehicle limited warranty.
*6: DEXRON™ VI type ATF may also be used.
*7: Available in mainland U.S.A. through an INFINITI dealer.
Capacity (Approximate)
Recommended Fluids/Lubricants
US mea-
sure
Imp mea-
sure
Liter
Engine oil
Drain and refill
With oil filter
change
VQ35HR
5-1/8 qt
4-1/4 qt
4.9
• Engine oil with API Certification Mark*
1
• Viscosity SAE 5W-30
VK50VE
7-1/8 qt
5-7/8 qt
6.7
Without oil filter
change
VQ35HR
4-7/8 qt
4 qt
4.6
VK50VE
6-1/8 qt
5-1/8 qt
5.8
Dry engine (Overhaul)
VQ35HR
6 qt
5 qt
5.7
VK50VE
7-5/8 qt
6-3/8 qt
7.2
Cooling system
With reservoir
tank
VQ35HR
9-3/4 qt
8-1/8 qt
9.2
Genuine NISSAN Long Life Antifreeze/
Coolant or equivalent
VK50VE
11-5/8 qt
9-5/8 qt
11
Reservoir tank
VQ35HR
7/8 qt
3/4 qt
0.8
VK50VE
7/8qt
3/4 qt
0.8
Automatic transmission fluid
VQ35HR
9-3/4 qt*
8
8-1/8 qt*
8
9.2*
8
Genuine NISSAN Matic S ATF *
2
VK50VE
12 qt*
8
10 qt*
8
11.3*
8
Differential gear oil
Front
1-3/8 pt
1-1/8 pt
0.65
Genuine NISSAN Differential Oil Hypoid
Super GL-5 80W-90 or API GL-5, Viscosity
SAE 80W-90 *
3
Rear
VQ35HR
3 pt
2-1/2 pt
1.40
VQ35HR except towing package:
Genuine NISSAN Differential Oil Hypoid
Super GL-5 80W-90 or API GL-5, Viscosity
SAE 80W-90*
3
VK50VE and VQ35HR with towing pack-
age:
Genuine NISSAN differential oil synthetic
75W-90 or API GL-5 synthetic gear oil, Vis-
cosity SAE 75W-90*
4
VK50VE
3-3/4 pt
3-1/8 pt
1.75
Transfer fluid
2-1/8 pt
1-3/4 pt
1.0
Genuine NISSAN Matic J ATF*
5
Power steering fluid (PSF)
1-1/8 qt
7/8 qt
1.0
Genuine NISSAN PSF or equivalent*
6
Brake fluid
—
—
—
Genuine NISSAN Super Heavy Duty Brake
Fluid*
7
or equivalent DOT 3 (US FMVSS
No. 116)
Multi-purpose grease
—
—
—
NLGI No. 2 (Lithium soap base)
Windshield washer fluid
—
—
—
Genuine NISSAN Windshield Washer Con-
centrate Cleaner & Antifreeze or equivalent
Fuel recommendation
—
—
—
RECOMMENDED FLUIDS AND LUBRICANTS
MA-13
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
*8: The fluid capacity is the reference value.
Engine Oil Recommendation
INFOID:0000000005248711
NISSAN recommends the use of an energy conserving oil in order to improve fuel economy.
Select only engine oils that meet the American Petroleum Institute (API) certification and International Lubri-
cant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils
have the API certification mark on the front of the container. Oils which do not have the specified quality label
should not be used as they could cause engine damage.
Anti-Freeze Coolant Mixture Ratio
INFOID:0000000005248712
The engine cooling system is filled at the factory with a high-quality,
year-round, anti-freeze coolant solution. The anti-freeze solution
contains rust and corrosion inhibitors. Therefore, additional cooling
system additives are not necessary.
CAUTION:
When adding or replacing coolant, be sure to use only Genuine
NISSAN Long Life Antifreeze/ Coolant or equivalent with the
proper mixture ratio of 50% anti-freeze and 50% demineralized
water/distilled water.
Other types of coolant solutions may damage your cooling sys-
tem.
1.
API certification mark
2.
API service symbol
SAIA1514E
SMA947CA
MA-14
< PERIODIC MAINTENANCE >
ENGINE MAINTENANCE (VQ35HR)
ENGINE MAINTENANCE (VQ35HR)
DRIVE BELT
DRIVE BELT : Exploded View
INFOID:0000000005248713
DRIVE BELT : Checking
INFOID:0000000005248714
WARNING:
Be sure to perform this step when engine is stopped.
• Check that the indicator (C) (notch on fixed side) of drive belt auto-tensioner is within the possible use range
(A).
NOTE:
• Check the drive belt auto-tensioner indication when the engine is cold.
• When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B) in the fig-
ure.
• Visually check entire drive belt for wear, damage or cracks.
• If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
DRIVE BELT : Tension Adjustment
INFOID:0000000005248715
.
ENGINE COOLANT
ENGINE COOLANT : Draining
INFOID:0000000005248716
WARNING:
• Never change engine coolant when the engine is hot to avoid being scalded.
• Wrap a thick cloth around radiator cap and carefully remove radiator cap. First, turn radiator cap a
quarter of a turn to release built-up pressure. Then turn radiator cap all the way.
JPBIA0002ZZ
1.
Power steering oil pump
2.
Alternator
3.
Drive belt auto-tensioner
4.
Crankshaft pulley
5.
A/C compressor
6.
Idler pulley
7.
Drive belt
8.
Idler pulley
A.
Possible use range
B.
Range when new drive belt is installed
C.
Indicator
D.
View D
ENGINE MAINTENANCE (VQ35HR)
MA-15
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
1.
Open radiator drain plug (2) at the bottom of radiator, and then
remove radiator cap.
When draining all of engine coolant in the system, open water drain plugs on cylinder block. Refer
to
.
2.
Remove reservoir tank as necessary, and drain engine coolant and clean reservoir tank before installing.
3.
Check drained engine coolant for contaminants such as rust, corrosion or discoloration.
If contaminated, flush the engine cooling system. Refer to
MA-25, "ENGINE COOLANT : Flushing"
ENGINE COOLANT : Refilling
INFOID:0000000005248717
1.
Remove engine cover. Refer to
.
2.
Install reservoir tank if removed, and radiator drain plug.
CAUTION:
Be sure to clean drain plug and install with new O-ring.
If water drain plugs on cylinder block are removed, close and tighten them. Refer to
3.
Check that each hose clamp is firmly tightened.
4.
Remove air relief plug (2) on radiator left side.
5.
Remove air relief plug (1) on heater hose. (models with air relief
plug on heater hose)
1
: Engine under cover
A
: Radiator drain plug hole
: Vehicle front
JPBIA0259ZZ
Tightening torque
: Refer to
1
: Reservoir tank
3
: Engine cover
: Vehicle front
JPBIA0260ZZ
2
: Heater hose
: Vehicle front
JPBIA0104ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст