Infiniti FX35, FX50 (S51). Manual — part 1497
BCM (BODY CONTROL MODULE)
PWC-49
< ECU DIAGNOSIS INFORMATION >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
ENGINE STATE
Engine stopped
Stop
While the engine stalls
Stall
At engine cranking
Crank
Engine running
Run
S/L LOCK-IPDM
Steering is unlocked
Off
Steering is locked
On
S/L UNLK-IPDM
Steering is locked
Off
Steering is unlocked
On
S/L RELAY-REQ
Steering lock system is not the LOCK condition and the changing condition from
LOCK to UNLOCK
Off
Steering lock system is the LOCK condition or the changing condition from LOCK
to UNLOCK
On
VEH SPEED 1
While driving
Equivalent to speed-
ometer reading
VEH SPEED 2
While driving
Equivalent to speed-
ometer reading
DOOR STAT-DR
Driver door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Driver door is unlocked
UNLOCK
DOOR STAT-AS
Passenger door is locked
LOCK
Wait with selective UNLOCK operation (5 seconds)
READY
Passenger door is unlocked
UNLOCK
ID OK FLAG
Steering is locked
Reset
Steering is unlocked
Set
PRMT ENG STRT
The engine start is prohibited
Reset
The engine start is permitted
Set
PRMT RKE STRT
NOTE:
The item is indicated, but not monitored.
Reset
KEY SW -SLOT
The Intelligent Key is not inserted into key slot
Off
The Intelligent Key is inserted into key slot
On
RKE OPE COUN1
During the operation of the Intelligent Key
Operation frequency
of the Intelligent Key
RKE OPE COUN2
NOTE:
The item is indicated, but not monitored.
—
CONFRM ID ALL
The key ID that the key slot receives is not recognized by any key ID registered to
BCM.
Yet
The key ID that the key slot receives accords with any key ID registered to BCM.
Done
CONFIRM ID4
The key ID that the key slot receives is not recognized by the fourth key ID regis-
tered to BCM.
Yet
The key ID that the key slot receives is recognized by the fourth key ID registered
to BCM.
Done
CONFIRM ID3
The key ID that the key slot receives is not recognized by the third key ID registered
to BCM.
Yet
The key ID that the key slot receives is recognized by the third key ID registered to
BCM.
Done
CONFIRM ID2
The key ID that the key slot receives is not recognized by the second key ID regis-
tered to BCM.
Yet
The key ID that the key slot receives is recognized by the second key ID registered
to BCM.
Done
Monitor Item
Condition
Value/Status
PWC-50
< ECU DIAGNOSIS INFORMATION >
[FRONT & REAR WINDOW ANTI-PINCH]
BCM (BODY CONTROL MODULE)
CONFIRM ID1
The key ID that the key slot receives is not recognized by the first key ID registered
to BCM.
Yet
The key ID that the key slot receives is recognized by the first key ID registered to
BCM.
Done
TP 4
The ID of fourth Intelligent Key is not registered to BCM
Yet
The ID of fourth Intelligent Key is registered to BCM
Done
TP 3
The ID of third Intelligent Key is not registered to BCM
Yet
The ID of third Intelligent Key is registered to BCM
Done
TP 2
The ID of second Intelligent Key is not registered to BCM
Yet
The ID of second Intelligent Key is registered to BCM
Done
TP 1
The ID of first Intelligent Key is not registered to BCM
Yet
The ID of first Intelligent Key is registered to BCM
Done
Monitor Item
Condition
Value/Status
BCM (BODY CONTROL MODULE)
PWC-51
< ECU DIAGNOSIS INFORMATION >
[FRONT & REAR WINDOW ANTI-PINCH]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
TERMINAL LAYOUT
PHYSICAL VALUES
JPMIA0062ZZ
PWC-52
< ECU DIAGNOSIS INFORMATION >
[FRONT & REAR WINDOW ANTI-PINCH]
BCM (BODY CONTROL MODULE)
Terminal No.
(Wire color)
Description
Condition
Value
(Approx.)
Signal name
Input/
Output
+
–
1
(W)
Ground
Battery power supply
Input
Ignition switch OFF
Battery voltage
2
(Y)
Ground
P/W power supply
(BAT)
Output
Ignition switch OFF
12 V
3
(O)
Ground
P/W power supply
(RAP)
Output
Ignition switch ON
12 V
4
(P)
Ground
Interior room lamp
power supply
(Battery saver signal)
Output
Interior room lamp battery saver is activated.
(Cuts the interior room lamp power supply)
0 V
Interior room lamp battery saver is not activat-
ed.
(Outputs the interior room lamp power supply)
12 V
5
(V)
Ground
Passenger door UN-
LOCK
Output
Passenger door
UNLOCK
(Actuator is activated)
12 V
Other than UNLOCK
(Actuator is not activated)
0 V
7
(Y)
Ground
Step lamp
Output
Step lamp
ON
0 V
OFF
12 V
8
(V)
Ground
All doors, fuel lid
LOCK
Output
All doors, fuel lid
LOCK
(Actuator is activated)
12 V
Other than LOCK
(Actuator is not activated)
0 V
9
(G)
Ground
Driver door, fuel lid
UNLOCK
Output
Driver door, fuel
lid
UNLOCK
(Actuator is activated)
12 V
Other than UNLOCK
(Actuator is not activated)
0 V
10
(BR)
Ground
Rear RH door and
rear LH door UN-
LOCK
Output
Rear RH door
and rear LH door
UNLOCK
(Actuator is activated)
12 V
Other than UNLOCK
(Actuator is not activated)
0 V
11
(R)
Ground
Battery power supply
Input
Ignition switch OFF
Battery voltage
13
(B)
Ground
Ground
—
Ignition switch ON
0 V
15
(Y)
Ground
ACC indicator lamp
Output
Ignition switch
OFF (LOCK indicator is not
illuminated)
Battery voltage
ACC or ON
0 V
17
(W)
Ground
Turn signal RH
(Front)
Output
Ignition switch
ON
Turn signal switch OFF
0 V
Turn signal switch RH
6.5 V
PKID0926E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст