Infiniti FX35, FX50 (S51). Manual — part 1058
EXL-228
< REMOVAL AND INSTALLATION >
[XENON TYPE]
FRONT COMBINATION LAMP
Removal and Installation
INFOID:0000000005244800
REMOVAL
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1.
Remove the front bumper fascia. Refer to
.
2.
Remove the headlamp mounting bolts.
3.
Remove the holding clip (A)* and the harness clip (B).
*: Left side only
4.
Pull out the headlamp assembly forward the vehicle.
5.
Disconnect the connector before removing the headlamp
assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000005244801
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
1.
Front side marker lamp bulb
2.
Front side marker lamp bulb socket
3.
Front turn signal lamp bulb
4.
Front turn signal lamp bulb socket
5.
Parking lamp bulb
6.
Parking lamp bulb socket
7.
Resin cap
8.
Seal packing
9.
Xenon bulb socket
10.
Xenon bulb
11. Bumper bracket
12. Seal packing
13.
HID control unit
14. Headlamp housing assembly
15. Retaining spring
Refer to
for symbols not described above.
JPMIA1103ZZ
JPMIA1104ZZ
FRONT COMBINATION LAMP
EXL-229
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
HEADLAMP BULB
1.
Remove the engine room cover*. Refer to
.
* : VK Engine Models
2.
Remove the fender rubber protector. Keep a service area.
3.
Rotate the resin cap counterclockwise and unlock it.
4.
Rotate the bulb socket counterclockwise and unlock it.
5.
Remove the retaining spring lock. Remove the bulb from the
headlamp.
CAUTION:
Never break the xenon bulb ceramic tube when replacing
the bulb.
PARKING LAMP BULB
1.
Remove the engine room cover*. Refer to
.
* : VK Engine Models
2.
Remove the fender rubber protector. Keep a service area.
3.
Rotate the bulb socket counterclockwise and unlock it.
4.
Remove the bulb from the bulb socket.
FRONT TURN SIGNAL LAMP BULB
1.
Remove the engine room cover*. Refer to
.
* : VK Engine Models
2.
Remove the fender rubber protector. Keep a service area.
3.
Rotate the bulb socket counterclockwise and unlock it.
4.
Remove the bulb from the bulb socket.
FRONT SIDE MARKER LAMP BULB
1.
Remove the engine room cover*. Refer to
.
* : VK Engine Models
2.
Remove the fender rubber protector. Keep a service area.
3.
Rotate the bulb socket counterclockwise and unlock it.
4.
Remove the bulb from the bulb socket.
Disassembly and Assembly
INFOID:0000000005244802
DISASSEMBLY
1.
Rotate the resin cap counterclockwise and unlock it.
2.
Rotate the xenon bulb socket counterclockwise and unlock it.
3.
Remove the retaining spring lock. Remove the xenon bulb.
4.
Remove the bumper bracket.
5.
Remove the HID control unit installation screw.
6.
Remove the screw. Disconnect the connector from HID control unit.
7.
Pull out the xenon bulb socket from the headlamp housing assembly.
8.
Rotate the parking lamp bulb socket counterclockwise and unlock it.
9.
Remove the bulb from the parking lamp bulb socket.
10. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
11. Remove the bulb from the front turn signal lamp bulb socket.
JPMIA1105ZZ
EXL-230
< REMOVAL AND INSTALLATION >
[XENON TYPE]
FRONT COMBINATION LAMP
12. Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
13. Remove the bulb from the front side marker lamp bulb socket.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
• Install HID control unit securely.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
FRONT FOG LAMP
EXL-231
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP
Exploded View
INFOID:0000000005244803
Removal and Installation
INFOID:0000000005244804
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the front fender protector. Keep a service area. Refer to
.
2.
Remove the front fog lamp connector.
3.
Remove the screw.
4.
Disengage the pawl. And then remove the front fog lamp.
INSTALLATION
Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000005244805
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1.
Remove the front fender protector. Keep a service area. Refer to
.
1.
Front fog lamp
2.
Front fog lamp finisher
: Pawl
JPMIA1106ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст