Infiniti FX35, FX50 (S51). Manual — part 385
CCS-360
< ECU DIAGNOSIS INFORMATION >
[DCA]
ACCELERATOR PEDAL ACTUATOR
JCOWA0286GB
CCS
ACCELERATOR PEDAL ACTUATOR
CCS-361
< ECU DIAGNOSIS INFORMATION >
[DCA]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
DTC Inspection Priority Chart
INFOID:0000000005502000
If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspec-
tion priority chart.
JCOWA0287GB
CCS-362
< ECU DIAGNOSIS INFORMATION >
[DCA]
ACCELERATOR PEDAL ACTUATOR
DTC Index
INFOID:0000000005502001
NOTE:
• The details of time display are as per the following.
- CRNT: A malfunction is detected now
- PAST: A malfunction was detected in the past
• IGN counter is displayed in FFD (Freeze Frame Data).
- 0: The malfunctions that are detected now
- 1 - 39: It increases like 0
→
1
→
2 ··· 38
→
39 after returning to the normal condition whenever the ignition
switch OFF
→
ON. It returns to 0 when a malfunction is detected again in the process.
- If it is over 39, it is fixed to 39 until the self-diagnosis results are erased.
×
: Applicable
Priority
Detected items (DTC)
1
• U1000: CAN COMM CIRCUIT
• U1010: CONTROL UNIT (CAN)
2
• C1F02: APA C/U MALF
3
• C1F01: APA MOTOR MALF
• C1F03: APA HI TEMP
• C1F05: APA PWR SUPLY CIR
• C1F06: CAN CIR2
• C1F07: CAN CIR1
CONSULT-III display
ICC system warning lamp
Fail-safe function
Reference
C1F01: APA MOTOR MALF
×
×
C1F02: APA C/U MALF
×
×
C1F03: APA HI TEMP
—
—
C1F05: APA PWR SUPLY CIR
×
×
C1F06: CAN CIR2
×
×
C1F07: CAN CIR1
×
×
U1000: CAN COMM CIRCUIT
×
×
U1010: CONTROL UNIT (CAN)
×
×
CCS
DISTANCE CONTROL ASSIST SYSTEM SYMPTOMS
CCS-363
< SYMPTOM DIAGNOSIS >
[DCA]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYMPTOM DIAGNOSIS
DISTANCE CONTROL ASSIST SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000005502002
Symptoms
Reference page
Operation
Switch does not turn ON
.
Switch does not turn OFF
DCA system setting cannot be turned ON from
the navi screen
.
DCA system setting cannot be turned OFF from
the navi screen
DCA system not activated (switch is ON)
.
Display/Chime
Information display is not illuminated (vehicle
ahead indicator)
MWI-43, "Diagnosis Description"
Chime does not sound
.
Control
No force generated for putting back the accelera-
tor pedal
.
Detection of lead
vehicle
Frequently cannot detect the vehicle ahead
.
Detection zone is short
System misidentifies a vehicle even though there
is no vehicle ahead
• Adjust laser beam aiming: Refer to
BEAM AIMING ADJUSTMENT : Description"
• Perform action test. Refer to
System misidentifies a vehicle in the next lane
System does not detect the vehicle ahead at all
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст