Infiniti FX35, FX50 (S51). Manual — part 1894
DUCT AND GRILLE
VTL-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INSTALLATION
Installation is basically the reverse order of removal.
REAR VENTILATOR DUCT 2
REAR VENTILATOR DUCT 2 : Removal and Installation
INFOID:0000000005246191
REMOVAL
1.
Remove console rear finisher. Refer to
.
2.
Remove rear ventilator duct 2 (1).
INSTALLATION
Installation is basically the reverse order of removal.
FOOT GRILLE
FOOT GRILLE : Removal and Installation
INFOID:0000000005246192
REMOVAL
Driver side
1.
Remove foot grille (left) (1).
Passenger side
1.
Remove foot grille (right) (1).
INSTALLATION
Installation is basically the reverse order of removal.
FOOT DUCT
JSIIA1325ZZ
:
Pawl
JSIIA1326ZZ
:
Pawl
JSIIA1327ZZ
VTL-18
< REMOVAL AND INSTALLATION >
DUCT AND GRILLE
FOOT DUCT : Removal and Installation
INFOID:0000000005246193
REMOVAL
1.
Set the temperature at 18.0
°
C (60
°
F).
2.
Disconnect the battery cable from the negative terminal.
3.
Remove heater & cooling unit assembly. Refer to
(VQ35HR) or
4.
Remove mounting screws (A), and then remove heater pipe
cover (1).
5.
Remove mounting screws (B), and then remove foot duct (left)
(2).
6.
Remove air mix door motor (passenger side). Refer to
.
7.
Remove mode door motor and links. Refer to
8.
Remove mounting screws (A), and then remove evaporator
cover (1).
9.
Remove mounting screws (B), and then remove foot duct (right)
(2).
INSTALLATION
Installation is basically the reverse order of removal.
HEATER DUCT
HEATER DUCT : Removal and Installation
INFOID:0000000005246194
REMOVAL
1.
Remove instrument lower panel LH. Refer to
2.
Remove mounting screw (A), and then remove heater duct (1).
INSTALLATION
Installation is basically the reverse order of removal.
REAR FLOOR DUCT 1
JSIIA1114ZZ
JSIIA1115ZZ
JSIIA1328ZZ
DUCT AND GRILLE
VTL-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
REAR FLOOR DUCT 1 : Removal and Installation
INFOID:0000000005246195
REMOVAL
1.
Remove instrument panel assembly. Refer to
2.
Remove mounting clips (A), and then remove rear floor duct 1
(1).
INSTALLATION
Installation is basically the reverse order of removal.
JPIIA0680ZZ
VTL-20
< REMOVAL AND INSTALLATION >
BLOWER UNIT
BLOWER UNIT
Exploded View
INFOID:0000000005246196
BLOWER UNIT
BLOWER UNIT : Removal and Installation
INFOID:0000000005246197
REMOVAL
1.
Remove instrument lower panel RH. Refer to
.
2.
Disconnect AWD control unit connector (AWD). Refer to
3.
Disconnect ECM (1) connectors.
4.
Remove mounting nuts (A), and then remove ECM with bracket
attached.
5.
Remove power steering control unit. Refer to
STC-27, "Removal and Installation"
6.
Disconnect intake door motor connector and blower motor connector.
1.
Adapter
2.
Intake box (right)
3.
Intake door lever 2
4.
Intake door motor
5.
Intake door link
6.
Intake door lever 1
7.
Filter cover
8.
In-cabin microfilter
9.
Intake upper case
10. Intake lower case
11.
Blower motor assembly
12. Seal
13. Intake box (left)
14.
Intake door 1
15. Intake door 2
JSIIA0009ZZ
JSIIA1302ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст