Infiniti FX35, FX50 (S51). Manual — part 1061
EXL-240
< REMOVAL AND INSTALLATION >
[XENON TYPE]
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000005244819
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000005244820
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the rear combination lamp lower and upper finisher.
2.
Remove the rear combination lamp mounting bolts.
3.
Disconnect the rear combination lamp connector.
4.
Pull the rear combination lamp toward outside of the vehicle. Remove the rear combination lamp.
INSTALLATION
Install in the reverse order of removal.
1.
Rear combination lamp
2.
Rear combination lamp lower finisher 3.
Rear combination lamp upper finisher
JPMIA1113ZZ
1.
Rear turn signal lamp bulb
2.
Rear turn signal lamp bulb socket
3.
Rear side marker lamp bulb socket
4.
Rear side marker lamp bulb
JPMIA1114ZZ
REAR COMBINATION LAMP
EXL-241
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Replacement
INFOID:0000000005244821
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
STOP/TAIL LAMP
Replacement integral with rear combination lamp assembly. Refer to
.
REAR SIDE MARKER LAMP BULB
1.
Remove the rear combination lamp. Refer to
2.
Rotate the rear side marker lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the rear side marker lamp bulb socket.
REAR TURN SIGNAL LAMP BULB
1.
Remove the rear combination lamp. Refer to
2.
Rotate the rear turn signal lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the rear turn signal lamp bulb socket.
EXL-242
< REMOVAL AND INSTALLATION >
[XENON TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000005244822
Removal and Installation
INFOID:0000000005244823
REMOVAL
1.
Remove the back door plate. Refer to
2.
Remove the high-mounted stop lamp mounting nuts.
3.
Disconnect the high-mounted stop lamp connector.
4.
Pull the high-mounted stop lamp toward rear of the vehicle. Remove the high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
1.
Seal packing
2.
High-mounted stop lamp
Refer to
for symbols in the figure.
JPMIA1115ZZ
BACK-UP LAMP
EXL-243
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BACK-UP LAMP
Exploded View
INFOID:0000000005244824
Removal and Installation
INFOID:0000000005244825
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the back door finisher inner. Refer to
2.
Remove the back-up lamp mounting nuts.
3.
Disconnect the back-up lamp connector. And then remove the back-up lamp.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Seal packing cannot be reused.
Replacement
INFOID:0000000005244826
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
BACK-UP LAMP BULB
1.
Remove the back door finisher inner. Refer to
1.
Seal packing
2.
Back-up lamp
Refer to
JPMIA1116ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст