Infiniti F50. Manual — part 616
INSTRUMENT PANEL ASSEMBLY
IP-11
C
D
E
F
G
H
J
K
L
M
A
B
IP
WORK STEPS
When removing instrument panel and pad, combination meter, display unit or console assembly, take steps in
the order shown by ( ) numbers below.
( ):number indicates step in removal procedures.
1.
Combination meter
2.
Ventilation mask (LH)
3.
Ventilation mask (RH)
4.
Cluster lid C
5.
Display unit
6.
Cluster lid A
7.
Cluster lid D
8.
Steering lock escutcheon
9.
Front defroster grille (LH)
10. Front defroster grille (RH)
11. Instrument panel mask (LH)
12. Instrument panel mask (RH)
13. Steering column cover
14. Ignition key lamp assembly
15. Instrument panel bracket
16. Clock
17. Cluster lid C lower
18. Cluster lid center lower
19. CD auto changer
20. Audio unit
21. Instrument panel bracket
22. Instrument panel and pad assembly
23. Front passenger air bag module
24. Instrument lower driver panel
25. Knee protector lower
26. A/T console finisher
27. Ashtray
28. Cup holder
29. Bolt cap
30. Console box assembly
31. Instrument finisher
32. Glove box cover
33. Glove box striker
34. Glove box assembly
35. Glove box pin
36. Instrument lower cover
Parts
Instrument panel
and pad
Combination meter
Display unit
Console box
assembly
Steering lock escutcheon
(1)
(1)
Steering column cover
(2)
(2)
Cluster lid D
(3)
(3)
Cluster lid A
(4)
(4)
Combination meter
(5)
(5)
Ventilation mask
(6)
(1)
Cluster lid C
(7)
(2)
Display unit
(8)
(3)
Clock
(9)
Cluster lid center lower
(10)
(1)
A/T finisher
(11)
(2)
Ashtray
(12)
(3)
Cup holder
(13)
(4)
Console box assembly
(14)
(5)
CD auto changer
(15)
Instrument lower cover
(16)
Glove box assembly
(17)
Instrument finisher
(18)
Glove box cover
(19)
Audio unit
(20)
Instrument reinforcement
(21)
Passenger air bag module
(22)
Instrument lower driver panel
(23)
Knee protector lower
(24)
Instrument mask
(25)
Front pillar garnish
(26)
Instrument panel bracket
(27)
Instrument panel and pad assembly
(28)
IP-12
INSTRUMENT PANEL ASSEMBLY
STEERING LOCK ESCUTCHEON
●
Pull steering lock escutcheon back to your side, and disconnect
metal clips.
CLUSTER LID D
●
Pull cluster lid D back to your side, disconnect metal clips and
connectors, and remove it.
CLUSTER LID A
1.
Remove screws with power tool.
2.
Pull cluster lid A back to your side, and disconnect metal clips.
3.
Make upper and lower side of cluster lid A narrower, and pull it
back to your side.
4.
Remove it as covering steering wheel.
SIIA0788E
SIIA0787E
SIIA0789E
SIIA0790E
INSTRUMENT PANEL ASSEMBLY
IP-13
C
D
E
F
G
H
J
K
L
M
A
B
IP
COMBINATION METER
1.
Remove screws with power tool, and disconnect connectors.
2.
Turn to right part of meter come to your side. Push down to front
face of meter up.
CAUTION:
Cover meter with cloth avoid contact with meter bracket
that may cause scratches or damages.
3.
Pull meter to your side, then left side (Confirm the back of meter
faces you).
CLUSTER LID C
1.
Remove ventilation mask, and remove screws with power tool.
2.
Insert a cloth-covered screwdriver, or thin spatula into dip
between instrument panel, pull cluster lid C back to your side,
and disengage metal clips below.
3.
Disconnect connectors, and remove cluster lid C.
CAUTION:
Cover surroundings with cloth to avoid scratches or dam-
ages.
CLOCK
1.
Remove screws, push to frontward clock, and remove clock.
2.
Push tips of cluster lid C lower from back of instrument panel, and remove clock.
SIIA0791E
SIIA0792E
SIIA0793E
SIIA0794E
IP-14
INSTRUMENT PANEL ASSEMBLY
CLUSTER LID CENTER LOWER
●
Open lid of ashtray. Hold lower part of cluster lid center lower,
and pull it back to your side. Disconnect both right/left pawls and
metal clips, and remove cluster lid center lower.
A/T FINISHER
1.
Open console lid and cup holder lid. Hold rear part of A/T fin-
isher, lift it up, and disconnect metal clips at its rear end.
2.
Hold side of A/T finisher, and disconnect metal clips in front. Pull
it backward, remove it, and disconnect connectors.
ASHTRAY
1.
Remove screws with power tool, pull ashtray back to your side,
and disconnect metal clips.
2.
Disconnect connectors, and remove ashtray.
CUP HOLDER
●
Remove screws with power tool, lift cup holder up, disconnect metal clips at its rear end, and remove it.
CONSOLE BOX ASSEMBLY
1.
Remove screws.
2.
Pull center console rearward of vehicle, and remove it from
instrument panel and rear cooler duct.
3.
Disconnect connectors, and remove console box assembly.
NOTE:
For easier installation, remove console finisher, console rear cover, center ventilator grille and console
box finisher first.
PIIA3256E
SIIA0796E
PIIA3257E
SIIA0798E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст