Infiniti F50. Manual — part 150
IN-VEHICLE SENSOR
ATC-125
C
D
E
F
G
H
I
K
L
M
A
B
ATC
IN-VEHICLE SENSOR
PFP:27720
Removal and Installation
EJS0009R
REMOVAL
1.
Remove instrument lower driver panel. Refer to
2.
Disconnect in-vehicle sensor connector and aspirator duct.
3.
Remove in-vehicle sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0312E
ATC-126
SUNLOAD SENSOR
SUNLOAD SENSOR
PFP:27721
Removal and Installation
EJS0009S
REMOVAL
1.
Remove sunload sensor garnish.
2.
Disconnect sunload sensor connector, then remove it.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0109E
INTAKE SENSOR
ATC-127
C
D
E
F
G
H
I
K
L
M
A
B
ATC
INTAKE SENSOR
PFP:27723
Removal and Installation
EJS001Y2
REMOVAL
1.
Remove heater & cooling unit. Refer to
2.
Remove the evaporator from heater & cooling unit.
3.
Separate the heater & cooling unit case.
4.
Remove the intake sensor.
INSTALLATION
Installation is basically the reverse order of removal.
RJIA0110E
ATC-128
BLOWER UNIT
BLOWER UNIT
PFP:27200
Removal and Installation
EJS0009U
REMOVAL
1.
Remove glove box assembly. Refer to
2.
Remove glove box cover, the instrument lower assistant panel
and instrument reinforcement. Refer to
3.
Remove the ECM and CD auto changer (If equipped). Refer to
IP-10, "Removal and Installation"
.
4.
Disconnect the blower motor connector, intake door motor con-
nector and auto amp. connector.
5.
Remove the screws from the blower unit, then remove it.
CAUTION:
Slide the blower unit toward right, remove location pins (2
pieces), then move it downwards.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
●
Make sure the location pins (2 pieces) are securely installed.
NOTE:
●
When attaching the blower unit, the work will be easier if the blower motor is removed first.
RJIA0313E
RJIA0314E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст