Infiniti F50. Manual — part 738
TOP TETHER STRAP CHILD RESTRAINT
SB-9
C
D
E
F
G
I
J
K
L
M
A
B
SB
TOP TETHER STRAP CHILD RESTRAINT
PFP:88000
Removal and Installation
EHS00089
CAUTION:
Replace anchor bolts if they are deformed or worn out.
REMOVAL
1.
Remove the top tether strap child restraint cover. Refer to
2.
Remove the top tether strap child restraint.
INSTALLATION
To install, reverse the removal procedure sequence.
SHIA0164E
SB-10
TOP TETHER STRAP CHILD RESTRAINT
SC-1
STARTING & CHARGING SYSTEM
K ELECTRICAL
CONTENTS
C
D
E
F
G
H
I
J
L
M
SECTION
A
B
SC
STARTING & CHARGING SYSTEM
PRECAUTIONS . . . . . . . . . . . . . . .. 2
PREPARATION . . . . . . . . . . . . . . ... 3
Special Service Tool . . . . . . . . . . . . . 3
BATTERY . . . . . . . . . . . . . . . . . 4
How to Handle Battery . . . . . . . . . . . . 4
Trouble Diagnosis with Battery/Starting/Charging
System Tester . . . . . . . . . . . . . . .. 6
DIAGNOSTIC RESULT ITEM CHART . . . . .. 8
Removal and Installation . . . . . . . . . . .. 8
CHARGING SYSTEM . . . . . . . . . . . . . 9
DIAGNOSTIC PROCEDURE 5 . . . . . . ... 18
MALFUNCTION INDICATOR . . . . . . . .. 18
Removal and Installation . . . . . . . . . . 19
REMOVAL . . . . . . . . . . . . . . ... 19
INSTALLATION . . . . . . . . . . . . ... 20
Disassembly and Assembly . . . . . . . . . 21
STARTING SYSTEM . . . . . . . . . . . . . 22
Removal and Installation . . . . . . . . . . 28
REMOVAL . . . . . . . . . . . . . . ... 28
INSTALLATION . . . . . . . . . . . . ... 28
Disassembly and Assembly . . . . . . . . . 29
Inspection After Disassembly . . . . . . . . . 29
PINION/CLUTCH CHECK . . . . . . . . ... 29
SC-2
PRECAUTIONS
PRECAUTIONS
PFP:00011
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER”
EKS00F2P
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
●
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
●
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
●
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Wiring Diagrams and Trouble Diagnosis
EKS000A1
When you read wiring diagrams, refer to the following:
●
Refer to
GI-13, "How to Read Wiring Diagrams"
in GI section.
●
Refer to
for power distribution circuit in PG section.
When you perform trouble diagnosis, refer to the following:
●
Refer to
GI-10, "HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES"
in PG section.
●
Refer to
GI-26, "How to Perform Efficient Diagnosis for an Electrical Incident"
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст