Infiniti F50. Manual — part 828
REMOVAL AND INSTALLATION
WT-27
C
D
F
G
H
I
J
K
L
M
A
B
WT
3.
Place wheel on turntable of tire machine. Ensure that transmitter
is 270 degree from mounting head when second side of tire is
fitted.
NOTE:
Do not touch transmitter at mounting head.
4.
Lubricate tire well and fit second side of tire as normal. Ensure that tire does not rotate relative to rim.
5.
Inflate tire and fit to appropriate wheel position.
SEIA0048E
WT-28
SERVICE DATA
SERVICE DATA
PFP:00030
Road Wheel
EES000DT
Tire
EES000DU
Unit: kPa (kg/cm
2
, psi)
Kind of wheel
Aluminum
Steel for emergency use
Deflection limit
Lateral deflection
Less than 0.3 mm
(0.012 in)
Less than 1.0 mm
(0.039in)
Vertical deflection
Less than 0.3 mm
(0.012in)
Less than 1.2 mm
(0.047in)
Allowable quantity of
residual unbalance
Dynamic
(On the ear part)
Less than 10g (0.35oz) (per side)
Static (On the ear part)
Less than 20g (0.70oz)
Tire size
Air pressure
Front wheel
Rear wheel
225/55R17
245/45R18
230 (2.3, 33)
230 (2.3, 33)
T145/90D16
420 (4.2, 60)
420 (4.2, 60)
WW-1
WIPER, WASHER & HORN
K ELECTRICAL
CONTENTS
C
D
E
F
G
H
I
J
L
M
SECTION
A
B
WW
WIPER, WASHER & HORN
PRECAUTION . . . . . . . . . . . . . . . 2
WASHER SYSTEM . . . . . . . . . . . . . . 3
System Description . . . . . . . . . . . . .. 3
WIPER OPERATION . . . . . . . . . . . 3
WASHER OPERATION . . . . . . . . . . . 4
Component Parts and Harness Connector Location
CONSULT-II Function . . . . . . . . . . . 10
On Board Diagnosis . . . . . . . . . . . ... 12
Linkage . . . . . . . . . . . . . . . . ... 20
REMOVAL . . . . . . . . . . . . . . ... 20
INSTALLATION . . . . . . . . . . . . ... 20
REMOVAL . . . . . . . . . . . . . . ... 22
INSTALLATION . . . . . . . . . . . . ... 22
Inspection for Washer Nozzle . . . . . . . . . 22
CHECK VALVE . . . . . . . . . . . . . 22
Wiper and Washer Switch Circuit Check . . . . 22
INSPECTION OF SWITCH CIRCUIT . . . . .. 22
Removal and Installation for Front Wiper and
Washer Switch . . . . . . . . . . . . . . 23
REMOVAL . . . . . . . . . . . . . . ... 23
INSTALLATION . . . . . . . . . . . . ... 23
Removal and Installation for Washer Tank . . . . 23
REMOVAL . . . . . . . . . . . . . . ... 23
INSTALLATION . . . . . . . . . . . . ... 23
Removal and Installation for Washer Motor . . . 24
REMOVAL . . . . . . . . . . . . . . ... 24
INSTALLATION . . . . . . . . . . . . ... 24
CIGARETTE LIGHTER . . . . . . . . . . . . 25
Wiring Diagram — CIGAR — . . . . . . . . . 25
Removal and Installation . . . . . . . . . . 26
REMOVAL . . . . . . . . . . . . . . ... 26
INSTALLATION . . . . . . . . . . . . ... 26
POWER SOCKET . . . . . . . . . . . . . . 27
Wiring Diagram — CIGAR — . . . . . . . . . 27
Removal and Installation . . . . . . . . . . 28
REMOVAL . . . . . . . . . . . . . . ... 28
INSTALLATION . . . . . . . . . . . . ... 28
HORN . . . . . . . . . . . . . . . . . . 29
Wiring Diagram — HORN — . . . . . . . . .. 29
Removal and installation . . . . . . . . . . 30
WW-2
PRECAUTION
PRECAUTION
PFP:00011
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER”
EKS00F57
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
●
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
●
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
●
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Wiring Diagrams and Trouble Diagnosis
EKS001IQ
When you read wiring diagrams, refer to the followings:
●
Refer to
GI-13, "How to Read Wiring Diagrams"
●
Refer to
for power distribution circuit.
When you perform trouble diagnosis, refer to the followings:
●
Refer to
GI-10, "HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES"
●
Refer to
GI-26, "How to Perform Efficient Diagnosis for an Electrical Incident"
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст