Infiniti F50. Manual — part 834
WASHER SYSTEM
WW-23
C
D
E
F
G
H
I
J
L
M
A
B
WW
Removal and Installation for Front Wiper and Washer Switch
EKS001JD
REMOVAL
1.
Remove steering column cover. Refer to
2.
Remove front wiper and washer switch connector.
3.
Remove two screws then remove wiper washer switch from the
base.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation for Washer Tank
EKS001JE
REMOVAL
1.
Pull out washer tank inlet.
2.
Remove fender protector, refer to
.
3.
Remove washer motor connector.
4.
Remove washer tank installation screw and pawl.
5.
Remove washer hose, and remove the washer tank from the
vehicle.
INSTALLATION
Tighten washer tank screw to specified torque.
CAUTION:
After installation, add water up to the upper level of the washer tank inlet, and check for water leaks.
PKIA2281E
PKIA0327E
PKIA0328E
Washer tank screw
: 3.9 - 5.0 N-m (0.39 - 0.52 kg-m)
WW-24
WASHER SYSTEM
Removal and Installation for Washer Motor
EKS001JF
REMOVAL
1.
Remove fender protector, refer to
.
2.
Remove washer motor connector and hose.
3.
Pull out washer motor in the direction of the arrow in the figure,
and remove the washer motor from the washer tank.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing washer motor, there should be no packing twists, etc.
PKIA0329E
CIGARETTE LIGHTER
WW-25
C
D
E
F
G
H
I
J
L
M
A
B
WW
CIGARETTE LIGHTER
PFP:35330
Wiring Diagram — CIGAR —
EKS001JG
TKWM0433E
WW-26
CIGARETTE LIGHTER
Removal and Installation
EKS001JH
REMOVAL
1.
Remove A/T console finisher, refer to
in
IP section.
2.
Pull out the cigarette lighter.
3.
Remove socket.
4.
Press out ring from the back of ashtray.
INSTALLATION
Installation is in the reverse order of removal.
PKIA0330E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст