Infiniti F50. Manual — part 808
TROUBLE DIAGNOSIS
SRS-19
C
D
E
F
G
I
J
K
L
M
A
B
SRS
From Diagnosis Mode to User Mode
To return to User mode from Diagnosis mode, touch “BACK” key of CONSULT-II until “SELECT SYSTEM”
appears, Diagnosis mode automatically changes to User mode.
HOW TO ERASE SELF-DIAGNOSIS RESULTS
●
“SELF-DIAG [CURRENT]”
A current Self-diagnosis result is displayed on the CONSULT-II screen in real time.
After the malfunction is repaired completely, no malfunction is detected on “SELF-DIAG [CURRENT]”.
●
“SELF-DIAG [PAST]”
Return to the “SELF-DIAG [CURRENT]” CONSULT-II screen by touching “BACK” key of CONSULT-II and
select “SELF-DIAG [CURRENT]” in SELECT DIAG MODE. Touch “ERASE” in “SELF-DIAG [CURRENT]”
mode.
NOTE:
If the memory of the malfunction in “SELF-DIAG [PAST]” is not erased, the User mode shows the
system malfunction by the operation of the warning lamp even if the malfunction is repaired com-
pletely.
●
“TROUBLE DIAG RECORD”
The memory of “TROUBLE DIAG RECORD” cannot be erased.
SRS804
SRS701
SRS-20
TROUBLE DIAGNOSIS
Self-diagnosis Function (Without CONSULT-II)
EHS000MC
●
The reading of these results is accomplished using one of two modes — “User mode” and “Diagnosis
mode”.
●
After a malfunction is repaired, turn the ignition switch OFF for at least one second, then back ON. Diag-
nosis mode returns to the User mode. At that time, the self-diagnostic result is cleared.
HOW TO CHANGE SELF-DIAGNOSIS MODE
HOW TO ERASE SELF-DIAGNOSIS RESULTS
After a malfunction is repaired, turn the ignition switch OFF for at least one second, then back ON. Diagnosis
mode returns to the User mode. At that time, the self-diagnostic result is cleared.
SRS Operation Check
EHS000MD
DIAGNOSTIC PROCEDURE 1
Checking Air Bag Operation by Using “AIR BAG” Warning Lamp-User Mode
1.
Turn the ignition switch from OFF to ON, and check that the air bag warning lamp blinks.
2.
Compare the SRS air bag warning lamp blinking pattern with the
examples.
PHIA0117E
BF-1845D
TROUBLE DIAGNOSIS
SRS-21
C
D
E
F
G
I
J
K
L
M
A
B
SRS
Warning lamp examples
“AIR BAG” warning lamp operation-User mode-
SRS condition
Reference item
●
No malfunction is detected.
●
No further action is necessary.
—
●
The system is malfunctioning and
need to be repaired as indicated.
Go to
.
●
Air bag is deployed.
●
Seat belt pre-tensioner is deployed.
Go to
●
Diagnosis sensor unit is malfunction-
ing.
●
Air bag power supply circuit is mal-
functioning.
●
SRS air bag warning lamp circuit is
malfunctioning.
Go to
“AIR BAG” Warning Lamp Does Not
Turn Off"
●
Diagnosis sensor unit is malfunction-
ing.
●
Air bag warning lamp circuit is mal-
functioning.
Go to
“AIR BAG” Warning Lamp Does Not
Turn On"
SHIA0011E
SHIA0012E
SHIA0013E
SHIA0014E
SRS-22
TROUBLE DIAGNOSIS
Trouble Diagnoses with CONSULT-II
EHS000MH
DIAGNOSTIC PROCEDURE 2
1.
Turn ignition switch OFF.
2.
Connect CONSULT-II and CONSULT-II CONVERTER to the
data link connector.
3.
Turn ignition switch ON.
4.
Touch “START(NISSAN BASED VHCL)”.
5.
Touch “AIR BAG”.
6.
Touch “SELF-DIAG [CURRENT]”.
SHIA0179E
PHIA0157E
SRS771
SRS697
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст