Infiniti F50. Manual — part 111
REPAIR FOR COMPONENT PARTS
AT-329
D
E
F
G
H
I
J
K
L
M
A
B
AT
CAUTION:
If necessary, replace the input clutch assembly.
Front carrier
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front carrier assembly.
Rear internal gear
●
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear internal gear assembly.
ASSEMBLY
1.
Install input clutch.
a.
Install drive plate, driven plate and retaining plate in input clutch drum.
b.
Using a flat-bladed screwdriver, install snap ring in input clutch
drum.
c.
Install needle bearing in input clutch assembly.
CAUTION:
Apply petroleum jelly to needle bearing.
d.
Install O-ring and seal rings in input clutch assembly.
CAUTION:
●
Do not reuse O-ring and seal rings.
●
Apply ATF to O-ring.
●
Apply petroleum jelly to seal rings.
2.
Install input clutch assembly in rear internal gear.
SCIA2864E
SCIA2853E
SCIA2849E
AT-330
REPAIR FOR COMPONENT PARTS
3.
Install front carrier assembly.
a.
Install snap ring in front carrier.
b.
Install needle bearing in front carrier.
CAUTION:
Apply petroleum jelly to needle bearing.
c.
Install bearing race in front carrier.
CAUTION:
Apply petroleum jelly to bearing race.
d.
Install front carrier assembly in input clutch and rear internal
gear.
SCIA2852E
SCIA2848E
SCIA2847E
SCIA2850E
REPAIR FOR COMPONENT PARTS
AT-331
D
E
F
G
H
I
J
K
L
M
A
B
AT
Mid Sun Gear, Rear Sun Gear, High and Low Reverse Clutch Hub
ECS00A0C
COMPONENTS
DISASSEMBLY
1.
Remove needle bearing and bearing race.
2.
Using a snap ring pliers, remove snap ring from high and low
reverse clutch hub.
1.
Needle bearing
2.
Bearing race
3.
Snap ring
4.
High and low reverse clutch hub
5.
Needle bearing
6.
Snap ring
7.
1st one-way clutch
8.
Rear sun gear
9.
Seal ring
10. Mid sun gear
SCIA2851E
SCIA2854E
SCIA2855E
AT-332
REPAIR FOR COMPONENT PARTS
3.
Remove high and low reverse clutch hub from mid sun gear
assembly.
a.
Remove needle bearing from high and low reverse clutch hub.
4.
Remove rear sun gear assembly from mid sun gear assembly.
a.
Using a flat-bladed screwdriver, remove snap ring from rear sun
gear.
SCIA2856E
SCIA2857E
SCIA2858E
SCIA2859E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст