Infiniti F50. Manual — part 518
CLIP AND FASTENER
EI-13
C
D
E
F
G
H
J
K
L
M
A
B
EI
SIIA0316E
EI-14
CLIP AND FASTENER
SIIA0317E
FRONT BUMPER
EI-15
C
D
E
F
G
H
J
K
L
M
A
B
EI
FRONT BUMPER
PFP:F2022
Removal and Installation
EIS0013H
CAUTION:
●
Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
REMOVAL
1.
Release front air cover clips, and remove front air gide.Refer to
.
PIIA0034E
EI-16
FRONT BUMPER
2.
Remove front grille. Refer to
3.
Remove bolts at the edge of engine undercover. (Refer to A shown in the figure)
4.
Remove bolts and clips of both right/left front fender protectors (on front side). (Refer to B and C shown in
the illustration)
5.
Remove bumper fascia screws from both right/left front fenders. (Refer to D shown in the figure)
6.
Remove bumper fascia clips from upper bracket assembly. (Refer to E shown in the figure)
7.
Remove bumper fascia assembly.
8.
Remove bumper reinforcement nuts. (Refer to G shown in the figure)
9.
Remove bumper upper retainer bolts and nuts. (Refer to F shown in the figure)
INSTALLATION
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст