Infiniti F50. Manual — part 674
MA-1
MAINTENANCE
L MAINTENANCE
CONTENTS
C
D
E
F
G
H
I
J
K
M
SECTION
A
B
MA
MAINTENANCE
PRECAUTIONS . . . . . . . . . . . . . . .. 3
PREPARATION . . . . . . . . . . . . . . ... 4
Special Service Tool . . . . . . . . . . . . . 4
Commercial Service Tools . . . . . . . . . . 4
GENERAL MAINTENANCE . . . . . . . . . ... 5
Explanation of General Maintenance . . . . . ... 5
PERIODIC MAINTENANCE . . . . . . . . . ... 7
Introduction of Periodic Maintenance . . . . . ... 7
Schedule 1 . . . . . . . . . . . . . . . ... 7
Schedule 2 . . . . . . . . . . . . . . . ... 9
RECOMMENDED FLUIDS AND LUBRICANTS . ...11
Fluids and Lubricants . . . . . . . . . . . ..11
SAE Viscosity Number . . . . . . . . . . . 11
GASOLINE ENGINE OIL . . . . . . . . . .11
Anti-Freeze Coolant Mixture Ratio . . . . . . . 12
ENGINE MAINTENANCE . . . . . . . . . . . 13
Checking Fuel Lines . . . . . . . . . . . ... 16
Changing Air Cleaner Filter . . . . . . . . . 16
VISCOUS PAPER TYPE . . . . . . . . . . 16
Changing Engine Oil . . . . . . . . . . . .. 16
Changing Oil Filter . . . . . . . . . . . . . 17
Changing Spark Plugs (Platinum-Tipped Type) . . 18
Checking EVAP Vapor Lines . . . . . . . . .. 19
Checking Cooling Fan Fluid Level and Lines . . . 19
CHASSIS AND BODY MAINTENANCE . . . . ... 20
REMOVAL . . . . . . . . . . . . . . ... 23
WHEEL BALANCE ADJUSTMENT . . . . . . 23
Checking Steering Gear and Linkage . . . . . . 26
STEERING GEAR . . . . . . . . . . . ... 26
STEERING LINKAGE . . . . . . . . . . . 26
SERVICE DATA AND SPECIFICATIONS (SDS) . .. 30
PRECAUTIONS
MA-3
C
D
E
F
G
H
I
J
K
M
A
B
MA
PRECAUTIONS
PFP:00001
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER”
ELS000Y7
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
●
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
●
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
●
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
MA-4
PREPARATION
PREPARATION
PFP:00002
Special Service Tool
ELS00012
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tools
ELS000JG
Tool number
(Kent-Moore No.)
Tool name
Description
KV10115801
(J38956)
Oil filter cap wrench
Removing and installing oil filter
a: 64.3 mm (2.531 in)
S-NT375
Tool name
Description
Power tool
Loosening bolts and nuts
Spark plug wrench
Removing and installing spark plug
PBIC0190E
S-NT047
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст