Infiniti F50. Manual — part 318
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
DI-115
C
D
E
F
G
H
I
J
L
M
A
B
DI
VEHICLE SIGNALS
●
A comparison check can be made of each actual vehicle signal
and the signals recognized by the system.
●
If vehicle speed is NG, refer to
DI-122, "Vehicle Speed Signal Inspection"
●
DI-123, "Illumination Control Signal Inspection"
●
If IGN is NG, refer to
DI-123, "Ignition Signal Inspection"
SPEAKER TEST
●
Refer to
AV-25, "Confirmation/Adjustment Mode (without navigation system)"
AUTO CLIMATE CONTROL
●
Refer to
ATC-53, "Self-diagnosis Function"
in ATC section for the details.
REARVIEW CAMERA
●
Refer to
DI-174, "Confirmation/Adjustment Mode"
for the details.
SKIA3741E
Diagnosis item
Display
Condition
Remarks
Vehicle Speed
ON
Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by
approx. 1.5 seconds. This is normal.
OFF
Vehicle speed = 0 km/h (0 MPH)
–
Ignition switch in ACC position
Light
ON
Lighting switch ON
–
OFF
Lighting switch OFF
IGN
ON
Ignition switch ON
–
OFF
Ignition switch ACC or OFF
DI-116
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
CONSULT-II Function
EKS006R1
CONSULT-II BASIC OPERATION PROCEDURE
1.
With the ignition switch OFF, connect “CONSULT-II” and “CON-
SULT-ll CONVERTER” to the data link connector, and turn the
ignition switch ON.
2.
Touch “START(NISSAN BASED VHCL)”.
3.
Touch “MULTIAV”.
If “MULTIAV” is not indicated, go to
4.
Select “VIRSION”, ”SELF-DIAG RESULTS” or “SIGNAL MONI-
TOR”.
SHIA0179E
SKIA3098E
PIIA0183E
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
DI-117
C
D
E
F
G
H
I
J
L
M
A
B
DI
SELF-DIAG RESULTS
●
Checks for connection between each unit and analyzes each individual unit, then displays the results on
the screen.
Items shown
NOTE:
When “IVCS ABNORMAL CONNECTION” is indicated, it does not malfunction.
DATA MONITOR
●
Displays status of the vehicle signal input to the AV control unit.
(Refer to
DI-113, "Confirmation/Adjustment Mode"
for operation
conditions for the connections to be indicated.)
●
For each signal, a comparison of actual operating status and the status recognized by the system can be
checked.
Items shown
Malfunctioning part/reference page
NO DTC IS DETECTED.
FURTHER TESTING MAY BE REQUIRED.
–
HEAD UNIT ABNORMAL
AV control unit malfunction
PANEL SW ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
AUDIO HEAD UNIT ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
AIR COMP RECEIVER ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
BOSE AMP ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
BOSE AMP ABNORMAL
BOSE speaker amp. malfunction
VOICE UNIT ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
VOICE UNIT ABNORMAL
Voice activated control module malfunction
REARVIEW CAMERA ABNORMAL CONNECTION
Refer to
DI-111, "Quick reference table"
PANEL SW ABNORMAL CONNECTION (MULTIFUNCTION SW)
Refer to
DI-111, "Quick reference table"
SKIA3742E
DATA MONITOR item
Display
Condition
Remarks
VHCL SPD SIG
ON
Vehicle speed >0 km/h (0 MPH)
Changes in indication may be delayed by approx.
1.5 seconds. This is normal.
OFF
Vehicle speed =0 km/h (0 MPH)
–
Ignition switch in ACC position
MTR ILL DIM
ON
Lighting switch ON
–
OFF
Lighting switch OFF
IGN SW
ON
Ignition switch ON
–
OFF
Ignition switch ACC or OFF
NAVI ON SIG
OFF
–
This item cannot be monitored.
(No change of display)
DI-118
VEHICLE INFORMATION AND INTEGRATED SWITCH SYSTEM /WITHOUT
NAVIGATION SYSTEM
VERSION
Displays version of each unit connected to the AV control unit.
Multifunction Switch Self-Diagnosis Function
EKS006E0
It can check ON/OFF operation of each switch in the multifunction switch and diagnose the input signals to the
rear control switch (audio) and steering switch (audio).
STARTING THE SELF-DIAGNOSIS MODE
1.
Turn ignition switch from OFF to ACC.
2.
Within 10 seconds press and hold the function switches “1” and
“6 ”simultaneously for 5 seconds.
Then the self-diagnosis operates.
EXITING THE SELF-DIAGNOSIS MODE
●
Turn ignition switch OFF, or press and hold the function switches “1” and “6” simultaneously for 5 seconds.
Then the self-diagnosis ends.
DIAGNOSIS FUNCTION
●
It can illuminate all the indicators (LED) in the multifunction switch.
●
It can check for continuity of the switches by sounding the buzzer when the multifunction switch is
pressed.
●
It can check for continuity of harness between multifunction switch and rear control switch (audio), or
steering switch (audio).
NOTE:
When it check continuity of harness between multifunction switch and rear control switch (audio), rear
control cancel switch is OFF position.
SKIA3743E
Version display
Remarks
“PANEL SW”
Multifunction switch
“HEAD UNIT”
AV control unit
“REAR VIEW CAMERA”
–
“FRONT SEAT DISPLAY”
Display
“AUDIO HEAD UNIT”
–
“AIR COMP RECEIVER”
Low Tire Pressure Warning Control Unit
“BOSE AMP”
–
“IVCS”
–
“VOICE UNIT”
Voice Activated Control Module
SKIA0609E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст