Infiniti F50. Manual — part 217
TRUNK LID
BL-115
C
D
E
F
G
H
J
K
L
M
A
B
BL
INSTALLTION
Install in the reverse order of removal.
Removal and Installation of Trunk Closure Control Unit
EIS003SQ
REMOVAL
1.
Remove the trunk rear finisher. Refer to
EI-52, "Removal and Installation"
2.
Remove the mounting bolts, and trunk closure control unit
bracket.
3.
After removing trunk closure control unit bracket together,
remove the harness connector, remove the mounting bolts, and
remove the trunk closure control unit.
CAUTION:
●
After installing, check operation.
●
After installing, perform fitting adjustment. Refer to
INSTALLATION
Install in the reverse order of removal.
Removal and Installation of Trunk Lid Weatherstrip
EIS000HZ
1.
Install the weatherstrip from the front with the vehicle center mark aligned to the weatherstrip mark.
2.
At rear side, align the weatherstrip seam to the center of the striker.
3.
After installing, pull the weatherstrip lightly to check for looseness.
CAUTION:
The weatherstrip shall be fit tightly onto the corners and trunk lid rear plate.
PIIA3369E
PIIA3370E
SIIA0180E
BL-116
TRUNK LID AND FUEL FILLER LID OPENER
TRUNK LID AND FUEL FILLER LID OPENER
PFP:84640
Component Part and Harness Connector Location
EIS000IV
CIIM0001E
TRUNK LID AND FUEL FILLER LID OPENER
BL-117
C
D
E
F
G
H
J
K
L
M
A
B
BL
Wiring Diagram — T&FLID —
EIS000IW
TIWM0194E
BL-118
TRUNK LID AND FUEL FILLER LID OPENER
TIWM0195E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст