Infiniti F50. Manual — part 293
COMBINATION METERS
DI-15
C
D
E
F
G
H
I
J
L
M
A
B
DI
Wiring Diagram — METER —
EKS00184
TKWM0060E
DI-16
COMBINATION METERS
TKWM0422E
COMBINATION METERS
DI-17
C
D
E
F
G
H
I
J
L
M
A
B
DI
Terminals and Reference Value for Combination Meter
EKS000ZY
Terminal
No.
Wire
color
Item
Condition
Reference value (V)
Ignition
switch
Operation
1
L/OR
Ignition switch (ACC)
ACC
—
Battery voltage
15
LG/B
CAN L
—
—
—
16
P/B
CAN H
—
—
—
17
OR/L
Vehicle speed signal (8-pulse)
ON
Speedometer operated
[When vehicle speed is
approx. 40 km/h (25MPH)]
18
PU/W
Vehicle speed signal
(2-pulse)
ON
Speedometer operated
[When vehicle speed is
approx. 40 km/h (25MPH)]
29
B/Y
Fuel level sensor ground
ON
—
Approx. 0
30
R/L
Fuel level senor signal
ON
—
.
57
Y/G
Battery power supply
OFF
—
Battery voltage
59
G
Ignition switch (ON)
ON
—
Battery voltage
60
B
Ground
ON
—
Approx. 0
61
B
Ground
ON
—
Approx. 0
ELF1084D
ELF1080D
DI-18
COMBINATION METERS
Meter/Gauges Operation, Odo/Trip Meter, A/T Indicator and ICC System Display
EKS000ZZ
SELF-DIAGNOSIS FUNCTION
●
Odo/trip meter segment, A/T indicator segment and ICC system display segment can be checked in self-
diagnosis mode.
●
Meters/gauges can be checked in self-diagnoses mode.
HOW TO ALTERNATE DIAGNOSIS MODE
1.
Turn the ignition switch ON, and switch the odo/trip meter to “trip A” or “trip B”.
NOTE:
If the diagnosis function is activated with the trip meter A displayed, the mileage on the trip meter A is
reset to 0.0 km (same as the trip meter B display).
2.
Turn the ignition switch OFF.
3.
While pushing the odo/trip meter switch, turn the ignition switch ON again.
4.
Check that the trip meter displays “0000.0”.
5.
Push the odo/trip meter switch at least 3 times within 5 seconds.
6.
All the segments on the odo/trip meter, A/T indicator and ICC system display illuminate, and simulta-
neously the low-fuel warning lamp indicator illuminate. At this time, the unified control meter is turned to
diagnosis mode.
NOTE:
If any of the segments is not displayed, replace the odo/trip meter and A/T indicator with the speedometer
assembly.
7.
Push the odo/trip meter switch. Indication of each meter/gauge
should be as shown in the right during pushing odo/trip meter
switch if there is no malfunctioning. (at this time, the low-fuel
warning lamp goes off).
SKIA3720E
SKIA0484E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст