Infiniti QX56 (Z62). Manual — part 639
EC-534
< PERIODIC MAINTENANCE >
[VK56VD]
POSITIVE CRANKCASE VENTILATION
POSITIVE CRANKCASE VENTILATION
Inspection
INFOID:0000000006218033
1.
CHECK PCV VALVE
With engine running at idle, remove PCV valve from rocker cover. A
properly working valve makes a hissing noise as air passes through
it. A strong vacuum should be felt immediately when a finger is
placed over valve inlet.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace PCV valve. Refer to
.
PBIB1589E
ECM
EC-535
< REMOVAL AND INSTALLATION >
[VK56VD]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
REMOVAL AND INSTALLATION
ECM
Removal and Installation
INFOID:0000000006218034
REMOVAL
1.
Remove the battery and battery tray. Refer to
PG-164, "Removal and Installation"
2.
Disconnect ECM harness connectors (1) as shown in the figure.
3.
Remove ECM bracket bolts (A).
4.
Separate ECM (2) and ECM bracket (3).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Must be perform additional service when replacing ECM. Refer to
.
JSBIA0307ZZ
EC-536
< REMOVAL AND INSTALLATION >
[VK56VD]
VVEL CONTROL MODULE
VVEL CONTROL MODULE
Removal and Installation
INFOID:0000000006218035
REMOVAL
1.
Disconnect VVEL control module harness connector.
2.
Remove the fix bolts. And then remove VVEL control module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Must be perform additional service when replacing VVEL control module. Refer to
.
FUEL PUMP CONTROL MODULE (FPCM)
EC-537
< REMOVAL AND INSTALLATION >
[VK56VD]
C
D
E
F
G
H
I
J
K
L
M
A
EC
N
P
O
FUEL PUMP CONTROL MODULE (FPCM)
Removal and Installation
INFOID:0000000006218036
REMOVAL
1.
Remove the luggage side finisher lower (LH). Refer to
INT-36, "LUGGAGE SIDE LOWER FINISHER :
.
2.
Disconnect fuel pump control module (FPCM) connector.
3.
Remove mounting bolts and then remove fuel pump control module (FPCM).
INSTALLATION
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст