Infiniti QX56 (Z62). Manual — part 712
EXL-140
< REMOVAL AND INSTALLATION >
[XENON TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000006369484
Removal and Installation
INFOID:0000000006369485
REMOVAL
1.
Remove rear spoiler. Refer to
EXT-41, "Removal and Installation"
.
2.
Remove high-mounted stop lamp mounting screws.
3.
Remove high-mounted stop lamp cover, and then remove high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
1.
Rear spoiler
2.
High-mounted stop lamp
3.
High-mounted stop lamp cover
JMLIA0985ZZ
BACK-UP LAMP
EXL-141
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BACK-UP LAMP
Exploded View
INFOID:0000000006369486
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000006369487
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove lamp mask. Refer to
.
2.
Disconnect back-up lamp connector.
3.
Remove back-up lamp mounting nuts, and then remove back-up lamp.
INSTALLATION
Install in the reverse order of removal.
1.
Seal packing
2.
Back-up lamp
Refer to
for symbols not described above.
JMLIA1321ZZ
1.
Back-up lamp
2.
Back-up lamp bulb
3.
Back-up lamp bulb socket
4.
Tail lamp bulb socket
5.
Tail lamp bulb
JMLIA1322ZZ
EXL-142
< REMOVAL AND INSTALLATION >
[XENON TYPE]
BACK-UP LAMP
Replacement
INFOID:0000000006369488
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
TAIL LAMP BULB
1.
Remove lamp mask. Refer to
.
2.
Disconnect tail lamp connector.
3.
Tail bulb socket counterclockwise and unlock it.
4.
Remove bulb from bulb socket.
BACK-UP LAMP BULB
1.
Remove lamp mask. Refer to
.
2.
Disconnect back-up lamp connector.
3.
Turn bulb socket counterclockwise and unlock it.
4.
Remove bulb from bulb socket.
LICENSE PLATE LAMP
EXL-143
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Exploded View
INFOID:0000000006369489
Removal and Installation
INFOID:0000000006369490
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove back door trim. Refer to
INT-39, "Removal and Installation"
2.
Disconnect license plate lamp connector.
3.
Remove back door finisher center upper.
4.
Remove license plate lamp while pushing a resin clip, and then remove license plate lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000006369491
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove back door trim. Refer to
INT-39, "Removal and Installation"
2.
Disconnect license plate lamp connector.
1.
License plate lamp harness
2.
License plate lamp bulb socket
3.
License plate lamp bulb
4.
License plate lamp
5.
Back door finisher center upper
JMLIA1122ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст