Infiniti QX56 (Z62). Manual — part 365
DAS
U0428 STRG SEN CAN 2
DAS-497
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U0428 STRG SEN CAN 2
DTC Logic
INFOID:0000000006228276
DTC DETECTION LOGIC
NOTE:
If DTC “U0428” is detected along with DTC “U1000”, first diagnose the DTC “U1000”. Refer to
"ADAS CONTROL UNIT : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the BSW system ON.
3.
Perform “All DTC Reading” with CONSULT-III.
4.
Check if the “U0428” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U0428” detected as the current malfunction?
YES
>> Refer to
DAS-497, "Diagnosis Procedure"
NO
>> Refer to
GI-40, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000006228277
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U0428” in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
.
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
DTC
(On board dis-
play)
Trouble diagnosis name
DTC detecting condition
Possible causes
U0428
(131)
STRG SEN CAN CIR2
If ADAS control unit detects an error signal
that is received from steering angle sensor via
CAN communication
Steering angle sensor
DAS-498
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
U150B ECM CAN 3
U150B ECM CAN 3
DTC Logic
INFOID:0000000006228278
DTC DETECTION LOGIC
NOTE:
If DTC “U150B” is detected along with DTC “U1000”, first diagnose the DTC “U1000”. Refer to
"ADAS CONTROL UNIT : DTC Logic"
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the BSW system ON.
3.
Perform “All DTC Reading” with CONSULT-III.
4.
Check if the “U150B” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U150B” detected as the current malfunction?
YES
>> Refer to
DAS-498, "Diagnosis Procedure"
NO
>> Refer to
GI-40, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000006228279
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U150B” in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
.
NO
>> GO TO 2.
2.
CHECK ECM SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ENGINE”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
DTC
(On board dis-
play)
Trouble diagnosis name
DTC detecting condition
Possible causes
U150B
(157)
ECM CAN CIRC 3
ADAS control unit detects an error signal that is
received from ECM via CAN communication
ECM
DAS
U150C VDC CAN 3
DAS-499
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
U150C VDC CAN 3
DTC Logic
INFOID:0000000006228280
DTC DETECTION LOGIC
NOTE:
If DTC “U150C” is detected along with DTC “U1000”, first diagnose the DTC “U1000”. Refer to
"ADAS CONTROL UNIT : DTC Logic"
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the BSW system ON.
3.
Perform “All DTC Reading” with CONSULT-III.
4.
Check if the “U150C” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U150C” detected as the current malfunction?
YES
>> Refer to
DAS-499, "Diagnosis Procedure"
NO
>> Refer to
GI-40, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000006228281
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U150C” in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
.
NO
>> GO TO 2.
2.
CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “ABS”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
DTC
(On board dis-
play)
Trouble diagnosis name
DTC detecting condition
Possible causes
U150C
(158)
VDC CAN CIRC 3
ADAS control unit detects an error signal that is
received from ABS actuator and electric unit
(control unit) via CAN communication
ABS actuator and electric unit (control
unit)
DAS-500
< DTC/CIRCUIT DIAGNOSIS >
[BSW]
U150D TCM CAN 3
U150D TCM CAN 3
DTC Logic
INFOID:0000000006228282
DTC DETECTION LOGIC
NOTE:
If DTC “U150D” is detected along with DTC “U1000”, first diagnose the DTC “U1000”. Refer to
"ADAS CONTROL UNIT : DTC Logic"
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1.
Start the engine.
2.
Turn the BSW system ON.
3.
Perform “All DTC Reading” with CONSULT-III.
4.
Check if the “U150D” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U150D” detected as the current malfunction?
YES
>> Refer to
DAS-500, "Diagnosis Procedure"
NO
>> Refer to
GI-40, "Intermittent Incident"
.
Diagnosis Procedure
INFOID:0000000006228283
1.
CHECK SELF-DIAGNOSIS RESULTS
Check if “U1000” is detected other than “U150D” in “Self Diagnostic Result” of “ICC/ADAS”.
Is “U1000” detected?
YES
>> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
DAS-486, "ADAS CONTROL UNIT : DTC Logic"
.
NO
>> GO TO 2.
2.
CHECK TCM SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “TRANSMISSION”.
Is any DTC detected?
YES
>> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to
NO
>> Replace the ADAS control unit. Refer to
DAS-63, "Removal and Installation"
DTC
(On board dis-
play)
Trouble diagnosis name
DTC detecting condition
Possible causes
U150D
(159)
TCM CAN CIRC 3
ADAS control unit detects an error signal that is
received from TCM via CAN communication
TCM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст