Infiniti QX56 (Z62). Manual — part 1351
BLOWER UNIT
VTL-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Removal and Installation
INFOID:0000000006276306
REMOVAL
1.
Remove A/C unit assembly. Refer to
HA-42, "HEATER & COOLING UNIT ASSEMBLY : Removal and
.
2.
Remove mounting bolts, and then disconnect heater & cooling unit assembly and blower unit assembly.
INSTALLATION
Install in the reverse order of removal.
1.
Shutter box case RH
2.
Shutter box upper case
3.
Packing
4.
Bellmouth ring
5.
Blower unit bracket
6.
Intake upper case
7.
Intake lower case
8.
Blower motor assembly
9.
Packing
10. Shutter box case LH
11.
Intake door motor
12. Intake door
13. In-cabin microfilter
14.
Filter cover
JMIIA0642ZZ
VTL-16
< REMOVAL AND INSTALLATION >
BLOWER MOTOR
BLOWER MOTOR
FRONT A/C UNIT
FRONT A/C UNIT : Exploded View
INFOID:0000000006276307
.
FRONT A/C UNIT : Removal and Installation
INFOID:0000000006276308
REMOVAL
1.
Remove instrument lower cover. Refer to
IP-14, "Removal and Installation"
2.
Disconnect blower motor connector.
3.
Remove fixing screws, and then remove blower motor.
INSTALLATION
Install in the reverse order of removal.
REAR A/C UNIT ASSEMBLY
REAR A/C UNIT ASSEMBLY : Exploded View
INFOID:0000000006276309
REAR A/C UNIT ASSEMBLY : Removal and Installation
INFOID:0000000006276310
REMOVAL
1.
Removal rear A/C unit assembly. Refer to
HA-47, "REAR A/C UNIT ASSEMBLY : Removal and Installa-
2.
Disconnect blower motor connector.
3.
Remove fixing screws, and then remove blower motor.
IN-CABIN MICROFILTER
VTL-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
IN-CABIN MICROFILTER
Exploded View
INFOID:0000000006276313
.
Removal and Installation
INFOID:0000000006276314
REMOVAL
1.
Remove glove box assembly. Refer to
IP-14, "Removal and Installation"
2.
Remove filter cover, and then remove air conditioner filter.
CAUTION:
If the filter is deformed/damaged when removing, replace it with a new one. Deformed/damaged filter
may deteriorate the dust collecting performance.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, handle the filter with extreme care to avoid deforming/damaging.
Replacement
INFOID:0000000006276315
Replace in-cabin microfilter.
Refer to
.
Affix a caution label inside the glove box when replacing filter.
VTL-18
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
In-cabin microfilter
INFOID:0000000006276316
Replacement interval
and
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст