Infiniti QX56 (Z62). Manual — part 200
CCS
INTELLIGENT CRUISE CONTROL
CCS-67
< WIRING DIAGRAM >
[ICC]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
JCOWM0350GB
CCS-68
< WIRING DIAGRAM >
[ICC]
INTELLIGENT CRUISE CONTROL
JCOWM0351GB
CCS
DIAGNOSIS AND REPAIR WORK FLOW
CCS-69
< BASIC INSPECTION >
[ICC]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000006224290
OVERALL SEQUENCE
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer
about the concerns carefully and understand the symptoms fully.
JPOIA0171GB
CCS-70
< BASIC INSPECTION >
[ICC]
DIAGNOSIS AND REPAIR WORK FLOW
NOTE:
The customers are not professionals. Never assume that “maybe the customer means···” or “maybe the cus-
tomer mentioned this symptom”.
>> GO TO 2.
2.
SELF-DIAGNOSIS WITH CONSULT-III
1.
Perform “All DTC Reading” with CONSULT-III.
2.
Check if any DTC is detected in self-diagnosis results of “ICC/ADAS” and “LASER”.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 3.
3.
ACTION TEST
Perform the ICC system action test to check the operation status. Refer to
Check if any other malfunctions occur.
>> GO TO 4.
4.
SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to
.
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
1.
Check the DTC in the self-diagnosis results.
2.
Perform trouble diagnosis for the detected DTC. Refer to
(ICC/ADAS) or
(LASER).
NOTE:
If “DTC: U1000” is detected, first diagnose the CAN communication system or ITS communication system.
>> GO TO 6.
6.
MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.
>> GO TO 7.
7.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
1.
Erases self-diagnosis results.
2.
Perform “All DTC Reading” again after repairing or replacing the malfunctioning parts.
3.
Check if any DTC is detected in self-diagnosis results of “ICC/ADAS” and “LASER”.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 8.
8.
REPAIR CHECK (ACTION TEST)
Perform the ICC system action test. Check if the malfunction symptom is solved or no other symptoms occur.
Is there any malfunction symptom?
YES
>> GO TO 4.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст