Infiniti QX56 (Z62). Manual — part 943
MWI-26
< SYSTEM DESCRIPTION >
SYSTEM
• The combination meter judges showing/hiding of “other warning”, according to the signals below:
Meter Illumination Level Indication
When receiving the following signals, the combination meter causes an interrupt on the information display to
indicate an illumination level.
WARNING CHECK INDICATION
• The combination meter can cause an interrupt on the information display to indicate a warning, based on
signals received from each unit and switch.
• The indicated warning can be checked with “WARNING” during the satisfaction of an interrupt indication
condition for each warning.
SETTING
Warning indication timing and time can be set.
Alert
Setting values for travel time, and low ambient temperature can be adjusted to meet the user's needs.
Maintenance
Setting values for engine oil, oil filter, tire, and other maintenance items can be adjusted to meet the user's
needs.
Options
Setting values for unit and effect items can be adjusted to meet the user's needs.
Operating condition
Ignition switch
ON
Mileage
More than value set in “SETTING”
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
Signal name
Signal path
Ignition signal
—
Illumination control switch signal (+)
Trip reset and illumination control switch
Combination meter
Illumination control switch signal (
−
)
Setting item
Setting range
Setting unit
Alert
Timer
No setting, 0.5 h - 6 h
0.5 h
ICY
ON/OFF
—
Setting item
Setting range
Maintenance
Tire
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Filter
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Oil
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
Other
No setting, 500 km - 30,000 km
(No setting, 250 mile - 18,500 mile)
MWI
SYSTEM
MWI-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Settings-reject Indication
• Regarding settings-reject indications, “SETTING CAN BE OPERATED WHEN STOPPED” is shown on the
information display when indication conditions are satisfied.
• When reaching 5 km/h (3.1 MPH) after accelerating from a stopping condition, a settings-reject indication is
displayed.
• When reaching less than 1 km/h (0.6 MPH) after decelerating from 5 km/h (3.1 MPH), a settings-reject indi-
cation is cancelled to allow settings.
• The combination meter judges a vehicle condition based on the following signals and displays a settings-
reject indication on the information display.
Setting item
Options
Language
English
Francais
Espanol
Unit
Miles,MPG,
°
F
km, l/100 km,
°
C
Effects
ON/OFF
Signal name
Signal path
Ignition signal
—
Vehicle speed signal
ABS actuator and electric unit (control unit)
Combination meter
JSNIA2408GB
MWI-28
< SYSTEM DESCRIPTION >
OPERATION
OPERATION
Switch Name and Function
INFOID:0000000006221718
JSNIA2978ZZ
Switch name
Operation
Description
Trip reset and illumi-
nation control switch
Trip reset switch (1)
Press
• The trip meter can be switched between A and B.
• Trip meter A/B can be reset by pressing and holding the
trip reset switch.
Illumination control switch (+) (2)
An illuminance level of the back light of the combination
meter can be adjusted.
Illumination control switch (
−
) (3)
Trip computer
switch
Enter switch (4)
• The information display screen can be switched.
• The item indicated on the information display can be con-
firmed.
• An indicated value of the trip computer can be reset by
pressing and holding the enter switch.
Select switch (5)
When plural items are shown on the information display, a
selected item can be changed to the other item.
MWI
DIAGNOSIS SYSTEM (COMBINATION METER)
MWI-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DIAGNOSIS SYSTEM (COMBINATION METER)
On Board Diagnosis Function
INFOID:0000000006221719
ON BOARD DIAGNOSIS ITEM
The combination meter allows the following diagnosis items with the on-board diagnosis function.
METHOD OF STARTING
1.
Turn ignition switch OFF.
2.
While pressing the trip reset switch (1), turn ignition switch ON.
3.
If the diagnosis function is activated with “trip A” displayed, the
mileage on “trip A” is reset to “0000.0”. (The same way for “trip
B”.)
4.
Make sure that the trip meter displays “0000.0”.
5.
Press the trip reset switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
6.
The combination meter is turned to self-diagnosis mode.
• Speedometer, tachometer, engine coolant temperature gauge, fuel gauge, engine oil pressure gauge,
and voltmeter return to zero, simultaneously.
• The dot matrix dots on the information display (1) blink alter-
nately.
NOTE:
• Check combination meter power supply and ground circuit when the self-diagnosis mode of the combi-
nation meter does not start. Replace combination meter if power supply and ground circuit are normal.
• If any of the dots are not displayed, replace combination meter.
Diagnosis item
Drive circuit check
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Engine oil pressure gauge
• Voltmeter
LCD (liquid crystal display) check
Information display
JSNIA2978ZZ
JSNIA0020GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст