Infiniti QX56 (Z62). Manual — part 1398
WW-70
< REMOVAL AND INSTALLATION >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000006220414
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000006220415
REMOVAL
1.
Front wiper blade RH
2.
Front wiper arm RH
3.
Front wiper arm cap
4.
Front wiper drive assembly
5.
Front wiper motor
6.
Front wiper arm LH
7.
Front wiper blade LH
Refer to
for the symbols in the figure.
JMLIA0940GB
1.
Front wiper linkage 1
2.
Shaft seal
3.
Front wiper motor
4.
Front wiper linkage 2
5.
Front wiper frame
: Multi
−
purpose grease or an equivalent.
JMLIA0945ZZ
FRONT WIPER DRIVE ASSEMBLY
WW-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
1.
Remove front wiper arms (LH and RH). Refer to
WW-66, "Removal and Installation"
.
2.
Remove cowl top cover. Refer to
EXT-21, "Removal and Installation"
.
3.
Disconnect the front wiper motor connector.
4.
Remove the mounting bolts from front wiper drive assembly.
5.
Remove the front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect front wiper motor connector.
3.
Operate front wiper to move it to the auto stop position.
4.
Install cowl top cover. Refer to
EXT-21, "Removal and Installation"
.
5.
Install front wiper arms. Refer to
WW-66, "Removal and Installation"
.
Disassembly and Assembly
INFOID:0000000006220416
DISASSEMBLY
1.
Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Never bend the linkage or damage the plastic part of the ball joint when removing the wiper link-
age.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
3.
Disconnect the front wiper motor connector.
4.
Install the front wiper motor to the front wiper frame.
5.
Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.
6.
Install the front wiper linkage 1 to the front wiper frame.
CAUTION:
• Never drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint
(retainer). Apply Multi
−
purpose grease or an equivalent if necessary.
WW-72
< REMOVAL AND INSTALLATION >
LIGHT & RAIN SENSOR
LIGHT & RAIN SENSOR
Exploded View
INFOID:0000000006220417
CAUTION:
When the light & rain sensor is removed from windshield, the light & rain sensor cannot be re-used.
Removal and Installation
INFOID:0000000006220418
REMOVAL
1.
Disengage light & rain sensor cover fixing pawls with a remover tool, and then remove rain senor cover.
2.
Disconnect light & rain sensor connector.
3.
Disengage both sides metal spring clips, and remove the light & rain sensor from the windshield.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Surface of windshield should be cleaned.
• Never touch gel/adhesive of new part.
• Lock the metal spring clips and install the light & rain sensor securely.
1.
Light & rain sensor connector
2.
Light & rain sensor cover
3.
Light & rain sensor
A.
Metal spring clip
: Pawl
: Do not reuse
JMLIA0941ZZ
WIPER AND WASHER SWITCH
WW-73
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000006220419
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст