Infiniti QX56 (Z62). Manual — part 718
FRONT GRILLE
EXT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000006367601
Removal and Installation
INFOID:0000000006367602
REMOVAL
1.
Fully open hood assembly.
2.
Apply protective tape (A) on surrounding area of front grille (1).
3.
Remove front grille upper fixing clips.
1.
Front grille
2.
Front emblem
: Pawl
JMKIA5462ZZ
JMKIA5424ZZ
JMKIA5423ZZ
EXT-20
< REMOVAL AND INSTALLATION >
FRONT GRILLE
4.
Pull front grille toward the direction shown in the figure, and then
disengage front grille fixing clips.
5.
Disconnect front camera harness connector, and then remove front grille.
6.
Remove emblem after removing front grille.
INSTALLATION
Install in the reverse order of removal.
JMKIA5425ZZ
COWL TOP
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Exploded View
INFOID:0000000006367603
Removal and Installation
INFOID:0000000006367604
REMOVAL
1.
Fully open hood assembly.
2.
Remove front wiper arm (LH and RH). Refer to
WW-66, "Removal and Installation"
.
3.
Remove front fender cover (LH and RH).
4.
Disconnect front washer tube connector.
5.
Remove cowl top cover fixing clips.
6.
Pull forward to release cowl top cover (1) from windshield glass.
CAUTION:
When performing the procedure after removing cowl top
cover, cover the lower end of windshield glass with ure-
thane etc.
7.
Remove the following parts after removing cowl top cover.
• Cowl top seal
• Washer nozzle (LH and RH)
• Washer tube
1.
Front fender cover RH
2.
EPT seal [t: 15.0 mm (0.591 in)]
3.
Cowl top cover seal
4.
Cowl top cover
5.
Front fender cover LH
6.
Double-sided tape
[t: 1.2 mm (0.047 in)]
7.
EPT seal [t: 3.0 mm (0.118 in)]
: Clip
: Pawl
: Vehicle front
Refer to
for symbols in the figure.
JMKIA5222ZZ
JMKIA1984ZZ
EXT-22
< REMOVAL AND INSTALLATION >
COWL TOP
• EPT sealer
INSTALLATION
Note the following items and then, install in the reverse order of removal.
CAUTION:
• When installing cowl top cover, check that blind clips are securely fitted in panel holes on body, and
then press them in.
• Always replace cowl top cover EPT sealer with a new one when installing old cowl top cover.
• After installing, perform adjustment of wiper arms. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст