Infiniti QX56 (Z62). Manual — part 86
AV-198
< DTC/CIRCUIT DIAGNOSIS >
STEERING SWITCH GROUND CIRCUIT
Standard
Between terminals 14 and 17
ENTER switch ON
: 2003 – 2043
Ω
switch ON
: 716 – 730
Ω
MENU DOWN switch ON
: 318 – 324
Ω
MENU UP switch ON
: 120 – 122
Ω
SOURCE switch ON
: 0
Ω
Between terminals 15 and 17
switch ON
: 716 – 730
Ω
switch ON
: 318 – 324
Ω
VOL UP switch ON
: 120 – 122
Ω
VOL DOWN switch ON
: 0
Ω
JSNIA0112GB
AV
MULTI AV SYSTEM SYMPTOMS
AV-199
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000006216375
RELATED TO NAVIGATION
RELATED TO HANDS-FREE PHONE
Simple Check for Bluetooth
™
Communication
If cellular phone and AV control unit cannot be connected with Bluetooth
™
communication, following proce-
dure allows the technician to judge which device has malfunction.
1.
Turn ON cellular phone, not connecting Bluetooth
™
communication.
2.
Start CONSULT-III, then start Windows
®
.
3.
Set CONSULT-III near a cellular phone.
4.
When operated Bluetooth
™
registration by cellular phone, check
if CONSULT-III
*
would be displayed on the device name.
(If other Bluetooth
™
device is located near cellular phone, a
name of the device would be displayed also.)
NOTE:
*:Displayed device name is “NISSAN-
”.
• If no device name is displayed, cellular phone is malfunctioning.
Repair the cellular phone first, then perform diagnosis.
• If CONSULT-III is displayed on device name, cellular phone is nor-
mal. Perform diagnosis as per the following table.
Symptoms
Check items
Probable malfunction location
Multifunction switch and preset
switch operation does not work.
• All switches cannot be operated.
• “MULTI AV” is displayed on system
selection screen when the CON-
SULT-III is started.
• Multifunction switch power supply and ground circuit
malfunction.
• AV communication circuit between AV control unit and
multifunction switch.
Perform CONSULT-III self-diagnosis. Refer to
.
• All switches cannot be operated.
• “MULTI AV” is not displayed on sys-
tem selection screen when the CON-
SULT-III is initialized.
AV control unit power supply and ground circuit malfunc-
tion. Refer to
AV-161, "AV CONTROL UNIT : Diagnosis
.
Only specified switch cannot be operat-
ed.
Multifunction switch or preset switch malfunction.
Perform multifunction switch and preset switch self-di-
agnosis function. Refer to
.
Fuel economy display is abnor-
mal.
There is malfunction in the CONSULT-
III “self-diagnosis result” of “MULTI AV”.
Refer to
Perform detected DTC diagnosis.
Refer to
.
There is no malfunction in the CON-
SULT-III “self-diagnosis results” of
“MULTI AV”.
Refer to
Ignition signal circuit malfunction.
Guide sound is not heard or too
low.
On the setting display select “system
sound (guide sound volume, etc.),” and
confirm that guide sound is ON.
AV control unit malfunction.
Replace AV control unit. Refer to
.
JPNIA0441GB
AV-200
< SYMPTOM DIAGNOSIS >
MULTI AV SYSTEM SYMPTOMS
RELATED TO AROUND VIEW MONITOR
Symptoms
Check items
Probable malfunction location
Does not recognize cellular
phone connection. (no connec-
tion is displayed on the display
at the guide.)
Repeat the registration of cellular phone.
AV control unit malfunction.
Replace AV control unit. Refer to
.
Hands-free phone cannot be
established.
• Hands-free phone operation can be
made, but the communication cannot
be established.
• Hands-free phone operation can be
performed, however, voice between
each other cannot be heard during the
conversation.
The other party's voice cannot
be heard by hands-free phone.
Check the “microphone speaker” in In-
spection & Adjustment Mode if sound is
heard.
Originating sound is not heard
by the other party with hands-
free phone communication.
Sound operation function is normal.
Sound operation function does not work.
Microphone signal circuit malfunction.
Refer to
.
The system cannot be operat-
ed.
• The voice recognition can be controlled.
• Steering switch's ”VOL UP”, “VOL
DOWN” and “
” switch works, but
“
” it does not work.
Steering switch malfunction. Replace steering wheel.
Refer to
.
Steering switch's “
”, ”VOL UP”, “VOL
DOWN” and “
” switches do not work.
Steering switch signal B circuit malfunction.
Refer to
.
All steering switches do not work.
Steering switch ground circuit malfunction.
Refer to
.
Symptoms
Check items
Probable malfunction location / Action
to take
It does not switch to camera image
even when the “CAMERA” switch is
pressed or the selector lever is in the
reverse position.
“Camera Cont.” of “Confirmation/Adjustment” can be
selected.
Ignition signal circuit malfunction
(around view monitor control unit).
“Camera Cont.” of “Confirmation/Adjustment” cannot
be selected.
• Around view monitor control unit
power supply and ground circuits
malfunction.
Refer to
MONITOR CONTROL UNIT : Diag-
nosis Procedure"
.
• AV communication circuits malfunc-
tion.
Refer to
The screen switches when pressing
the “CAMERA” switch or shifting the
selector lever to the reverse posi-
tion, however, all views are not dis-
played.
Only superimposing is displayed.
(Only the image displayed by AV control unit is dis-
played)
Camera image signal circuit between
around view monitor control unit and
front display unit malfunction.
Refer to
.
Superimposing is not displayed.
Communication circuit between AV
control unit and front display unit mal-
function.
Refer to
.
Camera image is rolling.
—
It cannot be switched to rear view
monitor even when the selector le-
ver is in the reverse position.
The front view is displayed normally.
Reverse signal circuit malfunction. (AV
control unit)
AV
MULTI AV SYSTEM SYMPTOMS
AV-201
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
RELATED TO CAMERA ASSISTANCE SONAR
The predicted course line display in
front view and rear view is malfunc-
tioning.
The “Steer. Angle Sensor” is not turned ON at “Con-
nection Confirmation” of “Camera Cont.”
Steering angle sensor signal circuits.
• The front view screen is not dis-
played.
• The front of Birds-Eye view
screen is not displayed.
Check the item Front
Camera in “Connec-
tion Confirmation”
mode of “Camera
Cont.”
• Image Output Signal: NG
• COMM Status: NG
• COMM Line: NG
• Front camera image signal circuit
malfunction.
• Front camera power supply and
ground circuits malfunction.
Refer to
.
• Image Output Signal: OK
• COMM Status: NG
• COMM Line: NG
Front camera communication signal cir-
cuit malfunction. Refer to
• The rear view screen is not dis-
played.
• The rear of Birds-Eye view screen
is not displayed.
Check the item Rear
Camera in “Connec-
tion Confirmation”
mode of “Camera
Cont.”
• Image Output Signal: NG
• COMM Status: NG
• COMM Line: NG
• Rear camera image signal circuit
malfunction.
• Rear camera power supply and
ground circuits malfunction.
Refer to
.
• Image Output Signal: OK
• COMM Status: NG
• COMM Line: NG
Rear camera communication signal cir-
cuits malfunction. Refer to
• The front-side screen is not dis-
played.
• The passenger side of Birds-Eye
view screen is not displayed.
Check the item Pass-
Side Camera in “Con-
nection Confirmation”
mode of “Camera
Cont.”
• Image Output Signal: NG
• COMM Status: NG
• COMM Line: NG
• Side camera RH image signal circuit
malfunction.
• Side camera RH power supply and
ground circuits malfunction.
Refer to
• Image Output Signal: OK
• COMM Status: NG
• COMM Line: NG
• Side camera RH communication cir-
cuit malfunction. Refer to
The driver side of Birds-eye view
screen is not displayed.
Check the item Dr-
Side Camera at “Con-
nection Confirmation”
mode of “Camera
Cont.”
• Image Output Signal: NG
• COMM Status: NG
• COMM Line: NG
• Side camera LH image signal circuit
malfunction.
• Side camera LH power supply and
ground circuits malfunction.
Refer to
• Image Output Signal: OK
• COMM Status: NG
• COMM Line: NG
• Side camera LH communication cir-
cuit malfunction. Refer to
When shift position is other than “R”
the front-side and front screen or the
Birds-Eye view and front screen re-
main displaying even if the vehicle
speed increases.
—
Vehicle speed signal circuit malfunction
(around view monitor control unit).
Symptoms
Check items
Probable malfunction location / Action
to take
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст