Infiniti QX56 (Z62). Manual — part 855
CENTER CONSOLE ASSEMBLY
IP-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
3.
Remove center console assembly front fixing screws (B).
4.
Lift up center console assembly back side, and then remove center console assembly.
INSTALLATION
Install in the reverse order of removal.
Disassembly and Assembly
INFOID:0000000006113101
CAUTION:
When disassembling, always use a remover tool that is made of plastic.
Disassembly and Assembly of Center Console Assembly
DISASSEMBLY
1.
Remove center console assembly. Refer to
IP-25, "Removal and Installation"
.
2.
Remove console mask.
1.
Open console lid.
2.
Remove console mask fixing clips with remover tool (A).
3.
Pull console mask up and back.
4.
Disconnect cool box switch connector (with Cool box).
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
3.
Remove console lid assembly mounting screws (A) and (B), and then remove console lid assembly.
4.
Remove console box fixing screws, and then remove console box.
ASSEMBLY
Assemble in the reverse order of disassembly.
Disassembly and Assembly of Console Finisher Assembly
DISASSEMBLY
1.
Remove console finisher assembly. Refer to
IP-25, "Removal and Installation"
.
2.
Remove console pocket assembly fixing screws, and then remove console pocket assembly.
3.
Remove cup holder assembly fixing screws, and then remove cup holder assembly.
JMJIA3898ZZ
: Clip
JMJIA4231ZZ
JMJIA4332ZZ
IP-28
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
4.
Remove console power socket. Refer to
PWO-11, "CONSOLE POWER SOCKET (REAR) : Removal and
.
5.
Remove 4WD switch assembly (2WD: SNOW MODE/TOW MODE/VDC OFF switch assembly). Refer to
DLN-108, "Removal and Installation"
.
ASSEMBLY
Assemble in the reverse order of disassembly.
REAR CONSOLE ASSEMBLY
IP-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
REAR CONSOLE ASSEMBLY
Exploded View
INFOID:0000000006113102
Removal and Installation
INFOID:0000000006113103
REMOVAL
1.
Operate rear seat lever or reclining lever to release seat lock assembly lock and to fold 2nd seats forward.
2.
Remove rear console assembly mounting screws, and then remove rear console assembly.
INSTALLATION
Install in the reverse order of removal.
1.
Cup holder assembly
2.
Rear console front finisher
3.
Rear console body assembly
4.
Rear console rear finisher
5.
Rear console lid assembly
6.
Rear console hinge mask
: Clip
: Pawl
: Metal clip
JMJIA3764ZZ
IP-30
< REMOVAL AND INSTALLATION >
REAR CONSOLE ASSEMBLY
Disassembly and Assembly
INFOID:0000000006113104
CAUTION:
When disassembling, always use a remover tool that is made of plastic.
DISASSEMBLY
1.
Remove rear console assembly. Refer to
IP-29, "Removal and Installation"
2.
Remove rear console rear finisher.
Pull back rear console rear finisher, and then disengage metal
clips.
3.
Remove rear console mask.
1.
Open the rear console lid assembly.
2.
Remove rear console hinge mask fixing pawls with remover
tool (A).
3.
Pull rear console hinge mask up and back.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
4.
Remove console lid assembly mounting screws (A), and then remove console lid assembly.
5.
Remove rear cup holder assembly.
1.
Open the rear console lid assembly.
2.
Pull upward to release rear cup holder assembly fixing clips
and metal clips from rear console assembly.
3.
Pull rear console mask up and back.
6.
Remove rear console front finisher.
1.
Remove screws (A).
2.
Pull rear console front finisher, and then disengage metal
clips.
ASSEMBLY
Assemble in the reverse order of disassembly.
: Metal clip
JMJIA3904ZZ
: Pawl
JMJIA3905ZZ
: Clip
: Metal clip
JMJIA3906ZZ
: Metal clip
JMJIA3907ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст