Infiniti QX56 (Z62). Manual — part 225
CCS
CHIME DOES NOT SOUND
CCS-167
< SYMPTOM DIAGNOSIS >
[ICC]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
8.
CHECK ICC SYSTEM
1.
Erase the self-diagnosis results, and then perform “All DTC Reading” again after performing the action
test. (Refer to
for action test.)
2.
Check that the ICC system is normal.
>> INSPECTION END
CCS-168
< SYMPTOM DIAGNOSIS >
[ICC]
DRIVING FORCE IS HUNTING
DRIVING FORCE IS HUNTING
Description
INFOID:0000000006224451
The vehicle causes hunting when the ICC system is active.
Diagnosis Procedure
INFOID:0000000006224452
1.
PERFORM SELF-DIAGNOSIS OF ECM
1.
Perform “All DTC Reading” with CONSULT-III.
2.
Check if the DTC is detected in self-diagnosis results of “ENGINE”. Refer to
Is any DTC detected?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK ICC SENSOR BODY WINDOW
1.
Check the vehicle driving conditions. Refer to
2.
Check the ICC sensor body window for contamination, foreign materials, or cracks. Refer to
>> INSPECTION END
3.
REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts identified by the self-diagnosis result.
>> GO TO 4.
4.
CHECK ICC SYSTEM
1.
Erase the self-diagnosis results, and then perform “All DTC Reading” again after performing the action
test. (Refer to
2.
Check that the ICC system is normal.
>> INSPECTION END
CCS
FREQUENTLY CANNOT DETECT THE VEHICLE AHEAD / DETECTION ZONE IS
SHORT
CCS-169
< SYMPTOM DIAGNOSIS >
[ICC]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
FREQUENTLY CANNOT DETECT THE VEHICLE AHEAD / DETECTION
ZONE IS SHORT
Description
INFOID:0000000006224453
The detection function may become unstable in the following cases.
• When the reflector of the vehicle ahead is deficient/ not clean enough to reflect ICC sensor.
• When driving a road with extremely sharp corners.
• When the sensor cannot detect the reflector of the vehicle ahead as the vehicle ahead is passing a hill or
passing the peak.
Diagnosis Procedure
INFOID:0000000006224454
1.
VISUAL CHECK (1)
Check ICC sensor body window for contamination and/or foreign materials.
Do foreign materials adhere?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
WIPE OUT DIRT AND FOREIGN MATERIALS
Wipe out the contamination and/or foreign materials from the ICC sensor body window.
>> GO TO 7.
3.
VISUAL CHECK (2)
Check ICC sensor body window for cracks and scratches.
Are there any cracks or scratches?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
ADJUST LASER BEAM AIMING
1.
Adjust the laser beam aiming. Refer to
2.
Perform ICC system action test. Refer to
.
3.
Check that the vehicle ahead detection performance improves.
Does it improve?
YES
>> INSPECTION END
NO
>> GO TO 5.
5.
REPLACE ICC SENSOR
1.
Replace ICC sensor. Refer to
2.
Adjust the laser beam aiming. Refer to
3.
Perform ICC system action test. Refer to
.
4.
Check that the vehicle ahead detection performance improves.
Does it improve?
YES
>> INSPECTION END
NO
>> GO TO 6.
6.
REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to
DAS-63, "Removal and Installation"
.
>> GO TO 7.
7.
CHECK ICC SYSTEM
1.
Erase the self-diagnosis results, and then perform “All DTC Reading” again after performing the action
test. (Refer to
for action test.)
2.
Check that the ICC system is normal.
CCS-170
< SYMPTOM DIAGNOSIS >
[ICC]
FREQUENTLY CANNOT DETECT THE VEHICLE AHEAD / DETECTION ZONE IS
SHORT
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст