Infiniti QX56 (Z62). Manual — part 709
EXL-128
< REMOVAL AND INSTALLATION >
[XENON TYPE]
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000006369467
Removal and Installation
INFOID:0000000006369468
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove front fender protector. Refer to
EXT-23, "FENDER PROTECTOR : Removal and Installation"
2.
Remove front fog lamp finisher.
3.
Disconnect front fog lamp harness connector.
4.
Remove front fog lamp fixing screw.
5.
Disengage pawl, and then remove front fog lamp.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
.
Replacement
INFOID:0000000006369469
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
FRONT FOG LAMP BULB
1.
Remove front fender protector. Keep the service area. Refer to
.
1.
Front bumper
2.
Front fog lamp
3.
Front fog lamp finisher
: Pawl
JMLIA1117ZZ
FRONT FOG LAMP
EXL-129
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
2.
Remove front fog lamp bulb connector (1).
3.
Rotate bulb (2) counterclockwise and unlock it.
JPLIA0921ZZ
EXL-130
< REMOVAL AND INSTALLATION >
[XENON TYPE]
SIDE TURN SIGNAL LAMP
SIDE TURN SIGNAL LAMP
Exploded View
INFOID:0000000006369470
Removal and Installation
INFOID:0000000006369471
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the door mirror. Refer to
MIR-32, "DOOR MIRROR ASSEMBLY : Removal and Installation"
2.
Remove the door mirror glass. Refer to
MIR-35, "GLASS MIRROR : Removal and Installation"
.
3.
Remove the side camera finisher. Refer to
MIR-33, "DOOR MIRROR ASSEMBLY : Disassembly and
4.
Remove side turn signal lamp fixing screws (E), and then
remove side turn signal lamp (with side turn signal lamp models
only).
NOTE:
Pull slightly side camera finisher (1) covering side turn signal
lamp bottom screw.
INSTALLATION
Install in the reverse order of removal.
1.
Door mirror assembly
2.
Door mirror cover
3.
Side camera finisher
4.
Side turn signal lamp housing
5.
Side turn signal lamp bulb
JMLIA1110ZZ
JMLIA0914ZZ
OPTICAL SENSOR
EXL-131
< REMOVAL AND INSTALLATION >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
OPTICAL SENSOR
Exploded View
INFOID:0000000006369472
Removal and Installation
INFOID:0000000006369473
REMOVAL
1.
Insert an appropriate tool between the optical sensor and the instrument upper panel. Pull out the optical
sensor upward.
2.
Disconnect optical sensor connector, and then remove optical sensor.
INSTALLATION
Install in the reverse order of removal.
1.
Optical sensor
JPLIA0922ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст