Infiniti QX56 (Z62). Manual — part 1294
A/T SHIFT LOCK SYSTEM
TM-85
< WIRING DIAGRAM >
[7AT: RE7R01B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
A/T SHIFT LOCK SYSTEM
Wiring Diagram
INFOID:0000000006226788
JCDWM1032GB
TM-86
< WIRING DIAGRAM >
[7AT: RE7R01B]
A/T SHIFT LOCK SYSTEM
JCDWM1067GB
A/T SHIFT LOCK SYSTEM
TM-87
< WIRING DIAGRAM >
[7AT: RE7R01B]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
JCDWM1068GB
TM-88
< BASIC INSPECTION >
[7AT: RE7R01B]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Diagnosis Flow
INFOID:0000000006226789
1.
OBTAIN INFORMATION ABOUT SYMPTOM
1.
Refer to
and interview the customer to obtain the malfunction information (condi-
tions and environment when the malfunction occurred) as much as possible when the customer brings in
the vehicle.
2.
Check the following:
-
Service history
-
Harnesses and connectors malfunction. Refer to
GI-40, "Intermittent Incident"
.
>> GO TO 2.
2.
CHECK DTC
1.
Before checking the malfunction, check whether any DTC exists.
2.
If DTC exists, perform the following operations.
-
Record the DTC and freeze frame data. (Print out the data using CONSULT-III and affix them to the Work
Order Sheet.)
-
Erase DTCs.
-
Check the relationship between the cause that is clarified with DTC and the malfunction information
described by the customer.
is effective.
3.
Check the information of related service bulletins and others also.
Do malfunction information and DTC exist?
Malfunction information and DTC exists. >>GO TO 3.
Malfunction information exists, but no DTC. >>GO TO 4.
No malfunction information, but DTC exists. >>GO TO 5.
3.
REPRODUCE MALFUNCTION SYMPTOM
Check any malfunction described by a customer, except those with DTC on the vehicle.
Also investigate whether the symptom is a fail-safe or normal operation. Refer to
.
When a malfunction symptom is reproduced, the question sheet is effective. Refer to
.
Verify the relationship between the symptom and the conditions in which the malfunction described by the cus-
tomer occurs.
>> GO TO 5.
4.
REPRODUCE MALFUNCTION SYMPTOM
Check the malfunction described by the customer on the vehicle.
Also investigate whether the symptom is a fail-safe or normal operation. Refer to
.
When a malfunction symptom is reproduced, the question sheet is effective. Refer to
.
Verify the relationship between the symptom and the conditions in which the malfunction described by the cus-
tomer occurs.
>> GO TO 6.
5.
PERFORM “DTC CONFIRMATION PROCEDURE”
Perform “DTC CONFIRMATION PROCEDURE” of the appropriate DTC to check if DTC is detected again.
Refer to
TM-77, "DTC Inspection Priority Chart"
when multiple DTCs are detected, and then determine the
order for performing the diagnosis.
NOTE:
If no DTC is detected, refer to the freeze frame data.
Is any DTC detected?
YES
>> GO TO 7.
NO
>> Check according to
GI-40, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст