Infiniti QX56 (Z62). Manual — part 390
DLK-26
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
KEY REMINDER FUNCTION : System Description
INFOID:0000000006225848
Key reminder is the function that prevents the key from being left in the vehicle.
Key reminder has the following 3 functions.
*: If the door closing impact shocks the door lock knob, or contacts against baggage with the door lock knob might activate the door locks
accidentally but unlock operation is perform in these cases.
CAUTION:
• The above function operates when the Intelligent Key is inside the vehicle. However, there may be
times when the Intelligent Key cannot be detected, and this function does not operate when the Intel-
ligent Key is on the instrument panel, rear parcel shelf, or in the glove box. Also, this system some-
times does not operate if the Intelligent Key is in the door pocket for the open door.
WELCOME LIGHT FUNCTION
WELCOME LIGHT FUNCTION : System Diagram
INFOID:0000000006225849
WELCOME LIGHT FUNCTION : System Description
INFOID:0000000006225850
The welcome light function operates as per the following. When the Intelligent Key is within the outside key
antenna detection area, the BCM turns on interior room lamp
*
and operates heart beat operation of the push-
button ignition switch.
*: Settings for map lamp, foot lamp, personal lamp, and puddle lamp are available.
OPERATION DESCRIPTION
Key remainder func-
tion
Operation condition
Operation
Driver door closed*
Right after driver side door is closed under the following conditions
• Door lock operation is performed
• Driver side door is open
• Driver side door is in lock state
All doors (except back door)
and fuel filler lid unlock
Door is open or closed
Right after all doors are closed under the following conditions
• Intelligent Key is inside the vehicle
• Any door is open
• All doors (except back door) are locked by door lock and unlock switch
or door lock knob
• All doors (except back
door) and fuel filler lid un-
lock
• Honk Intelligent Key warn-
ing buzzer
Back door is closed
Right after back door is closed under the following conditions
• Intelligent Key is inside vehicle
• All doors (except for back door) are closed
• All doors (except for back door) are locked
• All doors (except for back
door) and fuel filler lid un-
lock
• Back door can open with
back door opener switch
• Honk Intelligent Key warn-
ing buzzer
JMKIA5072GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• When the BCM detects that the Intelligent Key is within the outside key antenna detection area. BCM trans-
mits the request signal to the Intelligent Key and check it is near the door.
• Intelligent Key receives the request signal and transmits the key ID signal to the BCM via remote keyless
entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM illuminates lamps that are set, when key ID verification is OK.
TIMER FUNCTION
BCM can operate welcome light function, using the timer function, for 9 days, after key switch is turned OFF.
The timer function resets when the engine is started
*
.Operating period of timer function may differ depending
on battery size.
*
: Timer function does not stop if another Intelligent Key that has a different key ID is detected within the inte-
rior antenna detection area, when starting the engine.
OPERATION CONDITION
If the following condition are satisfied, welcome light function is operated.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles (1) and back door handle (2). How-
ever, this operating range depends on the ambient conditions.
WELCOME LIGHT FUNCTION SETTING
Welcome light function operation mode can be changed using CONSULT-III
With CONSULT-III
DLK-41, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Without CONSULT-III
The welcome light function ON/OFF can be switched by performing the following operation.
1.
Turn ignition switch: OFF
→
ON
2.
Press and hold the driver side door request switch for 5 seconds or more within 20 seconds after turning
the ignition switch ON.
3.
The switching is complete when combination meter buzzer sounds.
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000006225851
OPERATION DESCRIPTION
The warning function are as per the following items and are given to the user as warning information and
warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer, KEY warning lamp
and information display in combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
Function
Operation condition
Welcome light function
• All door are closed
• All doors is locked
• Ignition switch: OFF position
• Shift position: P position
• Intelligent Key is outside the vehicle
• Timer function is activated
JMKIA5224ZZ
DLK-28
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
• Take away warning
• Door lock operation warning
• Engine start information
• Steering lock information
• Intelligent Key low battery warning
• Key ID warning
• Key ID verification information
OPERATION CONDITION
Once the following condition from below is established, alert or warning is executed.
WARNING METHOD
The following table shows the alarm or warning methods with chime.
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
When a malfunction is detected on BCM, “KEY” warning lamp illuminates
OFF position warning
For internal
• Ignition switch: ACC position
• Door switch (driver side): ON (Door is open)
For external
OFF position warning (For internal) is in active mode, driver side door is
closed
NOTE:
OFF position (For external) active only when each of the sequence occurs
as below: P position warning
→
ACC warning
→
OFF position warning (For
internal)
→
OFF position warning (For internal)
P position warning
For internal
• Shift position: Except P position
• Engine is running to stopped (Ignition switch is ON to OFF)
For external
Warning is activated when driver door is closed from the open position
while the P position warning (for inside vehicle) is ON
ACC warning
• When P position warning is in active mode, shift position changes P po-
sition
• Ignition switch: ACC position
Take away warning
Door is open to close
• Ignition switch: Except LOCK position
• Door switch: ON to OFF (Door is open to close)
• Intelligent Key cannot be detected inside the vehicle
Door is open
• Door switch: ON (Door is open)
• Key ID verification every 5 seconds when registered Intelligent Key can-
not be detected inside the vehicle
Push-button ignition
switch operation
• Ignition switch: Except LOCK position
• Press push-button ignition switch
• Intelligent Key cannot be detected inside the vehicle
Door lock operation warning
When door lock operation is requested while door lock operating condition
of door request switch or Intelligent Key are not satisfied
Engine start information
Ignition switch is ON po-
sition
• Ignition switch: ON position
• Shift position: P position*
• Engine is stopped
Ignition switch is except
ON position
• Ignition switch: Except ON position
• Shift position: P position*
• Intelligent Key is inserted in key slot or Intelligent Key can be detected
inside the vehicle
Steering lock information
When steering lock cannot be released after ignition switch is turned ON
Intelligent Key low battery warning
When Intelligent Key is low battery, BCM is detected after ignition switch is
turned ON
Key ID warning
When registered Intelligent Key cannot be detected inside the vehicle after
ignition switch is turned ON
Key ID verification information
• When registered Intelligent Key cannot be detected inside the vehicle
• Intelligent Key battery is discharged
• When NATS antenna amp cannot be detected NATS ID
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-29
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Warning/Information functions
“KEY”
warning
lamp
Information display
(combination meter)
Warning chime
Combination
meter buzzer
Intelligent Key
warning buzzer
Intelligent Key system malfunction
Indicate
—
—
—
OFF position
warning
For internal
—
—
Activate
—
For external
—
—
—
Activate
P position
warning
For internal
—
Activate
—
For external
—
Active
ACC warning
—
Activate
—
Take away
warning
Door is open to
close
—
Activate
Activate
Door is open
—
—
Push button-igni-
tion switch opera-
tion
Activate
—
Door lock op-
eration warn-
ing
Request switch
operation
—
—
—
Activate
Intelligent Key
—
—
—
Activate
Key ID warning
—
—
—
Engine start information
—
—
—
Steering lock information
—
—
—
JMKIA0037GB
JMKIA0047GB
JMKIA4906ZZ
JMKIA4906ZZ
JMKIA0032GB
JMKIA0033GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст