Infiniti QX56 (Z62). Manual — part 95
AV-234
< REMOVAL AND INSTALLATION >
FRONT CAMERA
FRONT CAMERA
Removal and Installation
INFOID:0000000006216399
REMOVAL
1.
Remove front grille. Refer to
.
2.
Remove front camera mounting screws to remove front camera.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration. Refer to
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
AV
REAR CAMERA
AV-235
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
REAR CAMERA
Removal and Installation
INFOID:0000000006216400
REMOVAL
1.
Remove back door finisher center upper. Refer to
.
2.
Remove rear camera mounting screws to remove rear camera.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration. Refer to
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
AV-236
< REMOVAL AND INSTALLATION >
SIDE CAMERA
SIDE CAMERA
Removal and Installation
INFOID:0000000006216401
REMOVAL
1.
Remove side camera finisher. Refer to
.
2.
Remove screws to remove side camera.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform camera image calibration. Refer to
CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when remov-
ing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.
AV
STEERING ANGLE SENSOR
AV-237
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000006216402
DISASSEMBLY
Removal and Installation
INFOID:0000000006216403
REMOVAL
1.
Remove spiral cable. Refer to
.
2.
Remove steering angle sensor from spiral cable.
INSTALLATION
1.
Install in the reverse order of removal.
2.
Perform steering angle sensor neutral position adjustment. Refer to
JSNIA0135ZZ
1.
Spiral cable
2.
Steering angle sensor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст