Infiniti QX56 (Z62). Manual — part 44
AV-30
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
4.
Items of “Self Diagnosis” and “Confirmation/Adjustment” can be
selected on the trouble diagnosis initial screen.
SELF-DIAGNOSIS MODE
1.
Start the self-diagnosis function and select “Self Diagnosis”.
-
Self-diagnosis subdivision screen is displayed, and the self-diagnosis mode starts.
-
The bar graph visible on the center of the self-diagnosis subdivision screen indicates progress of the trou-
ble diagnosis.
2.
Diagnosis results are displayed after the self-diagnosis is com-
pleted. The unit names and the connection lines are color-coded
according to the diagnostic results.
NOTE:
Control unit (AV control unit) is displayed in red.
• Replace AV control unit if “Self-Diagnosis did not run because of a control
unit malfunction” is indicated. The symptom is AV control unit internal error.
Refer to
AV-212, "Removal and Installation"
.
• If multiple errors occur at the same time for a single unit, the screen switch
colors are determined according to the following order of priority: red > gray.
-
The comments of the self-diagnosis results can be viewed with a
component in the diagnosis result screen.
Detection Range of Self-diagnosis Mode
• The self-diagnosis mode allows the technician to diagnose the connection in the communication line
between AV control unit and each unit and the internal operation of the AV control unit.
• Because the start condition of diagnosis function is a switch operation, the on board diagnosis function can-
not be started up if any malfunction is detected in the communication circuit between AV control unit and
multifunction switch.
JSNIA2173ZZ
Diagnosis results
Unit
Connec-
tion line
Normal
Green
Green
Connection malfunction
Gray
Yellow
Unit malfunction
Note
Red
Green
JSNIA3191ZZ
JPNIA1787ZZ
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-31
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SELF-DIAGNOSIS RESULTS
Check the applicable display at the following table, and then repair the malfunctioning parts.
Only Unit Part Is Displayed In Red.
A Connecting Cable Between Units Is Displayed In Yellow.
CONFIRMATION/ADJUSTMENT MODE
Screen switch
Description
Possible malfunction location / Action to
take
Control Unit
Malfunction is detected in AV control unit
power supply and ground circuits.
Check AV control unit power supply and
ground circuits. When detecting no mal-
function in those components, replace AV
control unit.
Area with yellow connection lines
Description
Possible malfunction location / Action to
take
Control unit
⇔
Front Display
Serial communication circuits between AV
control unit and front display unit are mal-
functioning.
Serial communication circuits between AV
control unit and front display unit.
Control unit
⇔
GPS Antenna
GPS antenna connection malfunctions de-
tected.
Check the connection of the GPS antenna
connector.
Control unit
⇔
XM Antenna
Satellite radio antenna connection malfunc-
tion is detected.
Satellite radio antenna disconnection
Control unit
⇔
Around view
Around view
⇔
Parking Sensor
When either one of the following items are
detected:
• around view monitor control unit power
supply and ground circuits are malfunc-
tioning.
• AV communication circuits between AV
control unit and around view monitor
control unit are malfunctioning.
• Around view monitor control unit power
supply and ground circuits.
• AV communication circuits between AV
control unit and around view monitor
control unit.
Control unit
⇔
Parking Sensor
Around view
⇔
Parking Sensor
When either one of the following items are
detected:
• sonar control unit power supply and
ground circuits are malfunctioning.
• AV communication circuits between AV
control unit and sonar control unit are
malfunctioning.
• Sonar control unit power supply and
ground circuits.
• AV communication circuits between AV
control unit and sonar control unit.
Control unit
⇔
Video Dist.(Rear)
Video Dist.(Rear)
⇔
Rear display 2
When either one of the following items are
detected:
• video distributor power supply and
ground circuits are malfunctioning.
• headrest display unit LH power supply
and ground circuits are malfunctioning.
• AV communication circuits between AV
control unit and headrest display unit LH
are malfunctioning.
• location recognition signal circuit be-
tween headrest display unit LH and
ground is malfunctioning.
• Video distributor power supply and
ground circuits.
• Headrest display unit LH power supply
and ground circuits.
• AV communication circuits between AV
control unit and headrest display unit LH.
• Location recognition signal circuit be-
tween headrest display unit LH and
ground.
Video Dist.(Rear)
⇔
Rear display 2
When either one of the following items are
detected:
• headrest display unit RH power supply
and ground circuits are malfunctioning.
• AV communication circuits between
headrest display unit LH and headrest
display unit RH are malfunctioning.
• location recognition signal circuit be-
tween headrest display unit RH and
ground is malfunctioning.
• Headrest display unit RH power supply
and ground circuits.
• AV communication circuits between
headrest display unit LH and headrest
display unit RH.
• Location recognition signal circuit be-
tween headrest display unit RH and
ground.
AV-32
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
1.
Start the diagnosis function and select “Confirmation/Adjustment”. The confirmation/adjustment mode
indicates where each item can be checked or adjusted.
2.
Select each switch on the “Confirmation/Adjustment Mode”
screen to display the relevant trouble diagnosis screen. Press
the “Back” switch to return to the initial Confirmation/Adjustment
Mode screen.
Display Diagnosis
Vehicle Signals
JSNIA2990ZZ
JSNIA2176GB
AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-33
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
A comparison check can be made of each actual vehicle signal and
the signals recognized by the system.
Speaker Test
Select “SPEAKER DIAGNOSIS” to display the Speaker Diagnosis
screen. Press “Start” to generate a test tone in a speaker. Press
“Start” to generate a test tone in the next speaker. Press “Stop” to
stop the test tones.
Navigation
STEERING ANGLE ADJUSTMENT
JSNIA2991ZZ
Diagnosis item
Display
Vehicle status
Remarks
Vehicle speed
ON
Vehicle speed >= 8 km/h (5 MPH)
Changes in indication may be delayed. This is normal.
OFF
Vehicle speed < 8 km/h (5 MPH)
Parking brake
ON
Parking brake is applied.
OFF
Parking brake is released.
Lights
ON
Block the light from the auto light
optical sensor when the lighting
switch is 1st or 2nd.
—
OFF
Either of the following conditions.
• Lighting switch is OFF
• Expose the auto light optical sen-
sor to light when the lighting
switch is 1st or 2nd.
Ignition
ON
Ignition switch is ON.
—
OFF
Ignition switch is in ACC position.
Reverse
ON
Selector lever is in “R” position.
Changes in indication may be delayed. This is normal.
OFF
Selector lever is in other than “R”
position.
Side view Switch
OFF
—
This item is displayed, but cannot be monitored.
Room Lamp
OFF
—
This item is displayed, but cannot be monitored.
JPNIA1828ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст