Infiniti QX56 (Z62). Manual — part 379
DEF-26
< DTC/CIRCUIT DIAGNOSIS >
REAR WINDOW DEFOGGER RELAY
REAR WINDOW DEFOGGER RELAY
Description
INFOID:0000000006299436
The rear window defogger is operated by turning the rear window defogger switch ON.
Component Function Check
INFOID:0000000006299437
1.
CHECK FUNCTION
1.
Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III.
2.
Touch “ON”.
3.
Check that the rear window heating wire is getting warmer.
Is the inspection result normal?
YES
>> Rear window defogger relay function is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000006299438
1.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check the 15A fuse (No. 41, 42 located in IPDM E/R).
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK IPDM E/R OUTPUT SIGNAL
1.
Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III.
2.
Touch “ON”.
3.
Check voltage between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
(+)
(
−
)
CONSULT-III Active Test condition
Voltage (V)
(Approx.)
IPDM E/R
Connector
Terminal
E11
14
Ground
REAR DEFOGGER
ON
Battery voltage
OFF
0
REAR WINDOW DEFOGGER
DEF-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
REAR WINDOW DEFOGGER
Description
INFOID:0000000006299439
Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window
from fogging up.
Component Function Check
INFOID:0000000006299440
1.
CHECK FUNCTION
1.
Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III.
2.
Touch “ON”.
3.
Check that the rear window heating wire is getting warmer.
Is the inspection result normal?
YES
>> Rear window defogger relay function is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000006299441
1.
CHECK REAR WINDOW DEFOGGER POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear window defogger connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear window defogger harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
CHECK REAR WINDOW DEFOGGER GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Check continuity between rear window defogger harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK FILAMENT
DEF-43, "Inspection and Repair"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair filament.
4.
CHECK REAR WINDOW DEFOGGER POWER SUPPLY CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between IPDM E/R harness connector and rear window defogger harness connector.
(+)
(
−
)
Condition
Voltage (V)
(Approx.)
Rear window defogger
Connector
Terminal
D103
1
Ground
Rear window defogger switch
ON
Battery voltage
OFF
0
Rear window defogger
Ground
Continuity
Connector
Terminal
D104
2
Existed
DEF-28
< DTC/CIRCUIT DIAGNOSIS >
REAR WINDOW DEFOGGER
4.
Check continuity between IPDM E/R connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace harness.
5.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
>> INSPECTION END
IPDM E/R
Rear window defogger
Continuity
Connector
Terminal
Connector
Terminal
E11
14
D103
1
Existed
IPDM E/R
Ground
Continuity
Connector
Terminal
E11
14
Not existed
DOOR MIRROR DEFOGGER
DEF-29
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
DEF
N
O
P
DOOR MIRROR DEFOGGER
Description
INFOID:0000000006299442
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check
INFOID:0000000006299443
1.
CHECK DOOR MIRROR DEFOGGER
1.
Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III.
2.
Touch “ON”.
3.
Check that both side door mirror glasses are getting warmer.
Is the inspection result normal?
YES
>> Door mirror defogger is OK.
NO
>> Refer to
Diagnosis Procedure
INFOID:0000000006299444
1.
CHECK FUSE
1.
Turn ignition switch OFF.
2.
Check 10A fuse [No.80, located in fuse block (J/B)].
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.
CHECK DOOR MIRROR DEFOGGER CIRCUIT
1.
Disconnect IPDM E/R connector and door mirror (both sides) connector.
2.
Check continuity between IPDM E/R harness connector and door mirror (driver side) harness connector.
3.
Check continuity between IPDM E/R harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to
GI-40, "Intermittent Incident"
.
>> INSPECTION END
IPDM E/R
Door mirror (driver side)
Continuity
Connector
Terminal
Connector
Terminal
E11
14
D3
7
Existed
IPDM E/R
Ground
Continuity
Connector
Terminal
E11
14
Not existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст