Infiniti QX56 (Z62). Manual — part 34
MEMORY FUNCTION DOES NOT OPERATE
ADP-129
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
2.
CHECK LIFTING SENSOR (REAR)
Check lifting sensor (rear).
Refer to
ADP-95, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TILT
STEERING TILT : Diagnosis Procedure
INFOID:0000000006248434
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-125, "STEERING TILT : Diagnosis Procedure"
2.
CHECK TILT SENSOR
Check steering tilt sensor.
Refer to
ADP-97, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
STEERING TELESCOPIC
STEERING TELESCOPIC : Diagnosis Procedure
INFOID:0000000006248435
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-125, "STEERING TELESCOPIC : Diagnosis Procedure"
2.
CHECK TELESCOPIC SENSOR
Check steering telescopic sensor.
Refer to
ADP-99, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
ADP-130
< SYMPTOM DIAGNOSIS >
MEMORY FUNCTION DOES NOT OPERATE
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
DOOR MIRROR
DOOR MIRROR : Diagnosis Procedure
INFOID:0000000006248436
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-126, "DOOR MIRROR : Diagnosis Procedure"
2.
CHECK MIRROR SENSOR
Check mirror sensor. Refer to following.
• Driver side :
ADP-102, "DRIVER SIDE : Component Function Check"
• Passenger side :
ADP-103, "PASSENGER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
ADP-131
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006248437
1.
CHECK SYSTEM SETTING
1.
Check system setting.
Refer to
ADP-55, "SYSTEM SETTING : Special Repair Requirement"
.
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is normal.
NO
>> GO TO 2.
2.
PERFORM SYSTEM INITIALIZATION
1.
Perform system initialization.
Refer to
ADP-52, "SYSTEM INITIALIZATION : Special Repair Requirement"
.
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is normal.
NO
>> GO TO 3.
3.
CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to
DLK-117, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunction parts.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
ADP-132
< SYMPTOM DIAGNOSIS >
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
INTELLIGENT KEY INTERLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006248438
1.
PERFORM INTELLIGENT KEY INTERLOCK STORING PROCEDURE
1.
Perform Intelligent Key interlock storing procedure.
Refer to
ADP-54, "INTELLIGENT KEY INTERLOCK STORING : Special Repair Requirement"
.
2.
Check the operation.
Is the inspection result normal?
YES
>> Intelligent Key interlock function is normal.
NO
>> GO TO 2.
2.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunction parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check the intermittent incident. Refer to
GI-40, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст