Infiniti QX56 (Z62). Manual — part 835
INL-70
< REMOVAL AND INSTALLATION >
GLOVE BOX LAMP
GLOVE BOX LAMP
Exploded View
INFOID:0000000006288647
Replacement
INFOID:0000000006288648
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it.
Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with a new one.
GLOVE BOX LAMP BULB
1.
Remove glove box assembly. Refer to
IP-14, "Removal and Installation"
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
1.
Glove box assembly
2.
Bulb socket
3.
Bulb
4.
Lamp housing
JMLIA1050ZZ
FOOT LAMP
INL-71
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
FOOT LAMP
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000006288649
DRIVER SIDE : Replacement
INFOID:0000000006288650
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it.
Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with a new one.
FOOT LAMP BULB (DRIVER SIDE)
1.
Remove instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
PASSENGER SIDE
PASSENGER SIDE : Exploded View
INFOID:0000000006288651
1.
Bulb socket
2.
Bulb
3.
Lamp housing
4.
Instrument lower panel LH
JMLIA1051ZZ
JMLIA1052ZZ
INL-72
< REMOVAL AND INSTALLATION >
FOOT LAMP
PASSENGER SIDE : Replacement
INFOID:0000000006288652
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it.
Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with a new one.
FOOT LAMP BULB (PASSENGER SIDE)
1.
Remove instrument lower cover. Refer to
IP-14, "Removal and Installation"
2.
Rotate the bulb socket counterclockwise and unlock it.
3.
Remove the bulb.
REAR FOOT LAMP
REAR FOOT LAMP : Exploded View
INFOID:0000000006288653
REAR FOOT LAMP : Removal and Installation
INFOID:0000000006288654
CAUTION:
• Disconnect the battery cable from negative terminal or remove the fuse.
• Never touch rear foot lamp assembly directly by hand. Keep grease and other oily substaces away
from it.
• Never touch rear foot lamp assembly by hand while it is lit or right after it is off.
REMOVAL
1.
Remove seat cushion front finisher. Refer to
SE-112, "Removal and Installation"
2.
Release seatback lower carpet band from the back of seat cushion frame.
3.
Pull seatback lower carpet toward vehicle rear from underside.
1.
Instrument lower cover
2.
Lamp housing
3.
Bulb
4.
Bulb socket
1.
Rear foot lamp assembly
2.
Seatback lower carpet
: Clip
: Pawl
Vehicle front
JMLIA1149ZZ
FOOT LAMP
INL-73
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
4.
Disengage rear foot lamp assembly fixing pawls using a small
flat-bladed screwdriver (A) as shown by the arrow in the figure.
5.
Remove rear foot lamp assembly from seatback lower carpet.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• Rear foot lamp cannot be disassembled.
• Always replace rear foot lamp as an assembly, when replacing.
:Pawl
:Vehicle front
JMLIA1150ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст