Infiniti EX35. Manual — part 491
DLK-178
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Description
INFOID:0000000003729044
NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to
Diagnosis Procedure
INFOID:0000000003729045
1.
CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”
Check “AUTO LOCK SET” setting in “WORK SUPPORT”.
Refer to
DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY CYLIN-
DER OPERATION
DLK-179
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
POWER WINDOW DOWN FUNCTION DOES NOT OPERATE WITH KEY
CYLINDER OPERATION
Diagnosis Procedure
INFOID:0000000003729033
1.
CHECK DOOR KEY CYLINDER OPERATION
Check door key cylinder operation.
Does door lock/unlock with door key cylinder switch operation?
YES
>> GO TO 2.
NO
>> Go to
DLK-168, "Diagnosis Procedure"
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
DLK-180
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERATING
WITH INTELLIGENT KEY
POWER WINDOW DOWN FUNCTION DOES NOT WORK WHEN OPERAT-
ING WITH INTELLIGENT KEY
Description
INFOID:0000000003729038
NOTE:
• Before performing the diagnosis in the following procedure, check “ Work Flow”. Refer to
Diagnosis Procedure
INFOID:0000000003729039
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES
>> GO TO 2.
NO
>> Go to
.
2.
CHECK POWER WINDOW OPERATION
Check power window operation.
Does power window up/down with power window main switch?
YES
>> GO TO 3.
NO
>> Go to
.
3.
CHECK “PW DOWN SET” SETTING IN “WORK SUPPORT”
Check “PW DOWN SET” setting in “WORK SUPPORT”.
Refer to
DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “PW DOWN SET” setting in “WORK SUPPORT”.
4.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
WELCOME LIGHT FUNCTION DOES NOT OPERATE
DLK-181
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WELCOME LIGHT FUNCTION DOES NOT OPERATE
Description
INFOID:0000000003759861
NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
• Intelligent Key system (door lock function) is normal.
• All operation conditions are satisfied. Refer to
DLK-32, "WELCOME LIGHT FUNCTION : System Descrip-
Diagnosis Procedure
INFOID:0000000003759862
1.
CHECK WELCOME LIGHT FUNCTION SETTING
Check “WELCOME LIGHT OP SET” and “WELCOME LIGHT SELECT” setting in “WORK SUPPORT”. Refer
to
DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the function active?
YES
>> GO TO 2.
NO
>> Set “WELCOME LIGHT OP SET” and “WELCOME LIGHT SELECT” setting in “WORK SUP-
PORT”.
2.
CHECK DOOR LOCK FUNCTION
Check Intelligent Key system (door lock function).
Does the door lock/unlock with door request switch (driver side)?
YES
>> GO TO 3.
NO
>> Go to
DLK-169, "DRIVER SIDE : Description"
3.
CHECK INTERIOR ROOM LAMP CONTROL SYSTEM
Check interior room lamp control system. Refer to
Does the room lamp and puddle lamp turn ON?
YES
>> GO TO 4.
NO
>> Go to
.
4.
REPLACE BCM
BCS-84, "Removal and Installation"
.
>> GO TO 5.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> INSPECTION END
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст